Tag: M.W=300-400

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 446292-07-5, name is (R)-2-(2-Hydroxy-3-((4-(3-oxomorpholino)phenyl)amino)propyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 446292-07-5

Example – 6: Preparation of 2-5(S)-{2-Oxo-3-[4-(3-oxo-morpholin-4-yl) phenyl]- oxazolidin-5-ylmethyl}-isoindoIe-l,3-dione (III)60 gms of 2-{2-Hydroxy-3-[4-(3-oxo-mo holin-4-yl)phenylamino]-propyl}-isoindole- 1 ,3-dione and 180 ml of methylene chloride were charged into a clean and dry 4 neck R.B. flask. 29 gms of carbonyl diimidazole was added at about 30C and the resultant reaction mixture was stirred at about 30C for about 20 hours. After completion of the reaction, the reaction mixture was washed with water and the solvent was distilled completely to give 55gms of the title compound.

The synthetic route of 446292-07-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SYMED LABS LIMITED; MOHAN RAO, dodda; KRISHNA REDDY, pingili; ANNA REDDY, ambati; VENKAT REDDY, buthukuri; WO2012/32533; (2012); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 24566-79-8,Some common heterocyclic compound, 24566-79-8, name is N-(6-Bromohexyl)phthalimide, molecular formula is C14H16BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 2-(omega-Bromoalkyl)-isoindoline-1,3-dione (1 equiv) with N-methylbenzylamine (1 equiv) or its substituted analog in the presence of K2CO3 (3 equiv) was stirred in acetonitrile under reflux for 16 h. Once the reaction was finished, the solvent was evaporated under vacuum, producing a residue that was further dissolved in 50 mL of 5 M NaOH and extracted with ethyl acetate (3 x 50 mL). The combined organic extracts were dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure. The crude product was purified by silica gel column chromatography (dichloromethane to dichloromethane/methanol 98:2), yielding a yellow oil. The final product was obtained in the form of hydrochloride salt. The following compounds were obtained.

The synthetic route of 24566-79-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Guzior, Natalia; Bajda, Marek; Rakoczy, Jurand; Brus, Boris; Gobec, Stanislav; Malawska, Barbara; Bioorganic and Medicinal Chemistry; vol. 23; 7; (2015); p. 1629 – 1637;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1201923-48-9 as follows. Safety of (S)-tert-Butyl (1-(1,3-dioxoisoindolin-2-yl)-3-(3-fluorophenyl)propan-2-yl)carbamate

Step B 2-[(2S)-2-amino-3-(3-fluorophenyl)propyl]-1H-isoindole-1,3(2H)-dione [1.0]-hydrogen chloride To a solution of tert-butyl[(1S)-1-(3-fluorobenzyl)-2-hydroxyethyl]carbamate (9.40 g, 34.9 mmol), triphenylphosphine (9.15 g, 34.9 mmol), and phthalimide (5.14 g, 34.9 mmol) in tetrahydrofuran (100 mL, 1000 mmol) at room temperature was added diethyl azodicarboxylate (17.9 mL, 45.4 mmol). The reaction was stirred at room temperature for 2 hr and then concentrated under reduced pressure. The residue was purified by combi-flash chromatography eluted with EtOAc/hexane (0-40%) to give the desired intermediate. LCMS found: 399.0 (M+1). To the solution of the purified intermediate in methanol (20 mL, 400 mmol) was added 4.0 M hydrogen chloride in dioxane (30 mL, 100 mmol). The mixture was stirred at room temperature for 2 h and then concentrated under reduced pressure to give 3.1 g (26% total yield for the two steps) of the final product, 2-[(2S)-2-amino-3-(3-fluorophenyl)propyl]-1H-isoindole-1,3(2H)-dione [1.0]-Hydrogen chloride, as white solid. LC/MS found: 299.0 (M+H)+.

According to the analysis of related databases, 1201923-48-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Incyte Corporation; Huang, Taisheng; Feng, Hao; Kong, Lingquan; Wang, Anlai; Ye, Hai Fen; US2013/96144; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 356068-93-4,Some common heterocyclic compound, 356068-93-4, name is (Z)-5-((5-Fluoro-2-oxoindolin-3-ylidene)methyl)-2,4-dimethyl-1H-pyrrole-3-carboxylic acid, molecular formula is C16H13FN2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of compound 109 (0.5 g, 1.67 mmol) in THF(150 mL) at00C was added HOBt (0.34 g, 2.8 mmol), triethylamine (0.6 mL, 4.18 mmol),ECDI HCl (0.48 g, 2.8 mmol) and compound 202 (0.6 g, 3.33 mmol) successively. The mixture was stirred overnight at room temperature, evaporated to remove solvent, diluted with water (50 mL), brine (50 mL) and saturated sodium bicarbonate solution (50 mL). The pH of solution was adjusted to 11-12 with 1OM NaOH. The mixture was filtered, washed with water, dried to obtain crude yellow solid 203 (550 mg, 69%). LCMS: 478 [M+l]+, 1H NMR (DMSO-J6): delta 2.40 (s, 3H), 2.43 (s, 3H), 3.63 (m, 2H),3.82 (s, 3H), 4.20 (t,2H), 6.92 (m, 2H), 7.07 (d, 2H), 7.70 (m, 2H), 7.84(s, 1H),7 .91 (d, 2H), 10.88 (s, IH), 13.68 (s, IH).

The synthetic route of 356068-93-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CURIS, INC.; WO2008/33747; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 24566-79-8, The chemical industry reduces the impact on the environment during synthesis 24566-79-8, name is N-(6-Bromohexyl)phthalimide, I believe this compound will play a more active role in future production and life.

General procedure: A mixture of the corresponding secondary amine 3a-d [23] (5.5mmol), anhydrous K2CO3 (6mmol) and compounds 2a-d (5mmol) were added in CH3CN (20ml). The mixture was heated at 65C for 8-10h. The solvent was evaporated under reduced pressure. Then water (25mL) was added, and the mixture was extracted with dichloromethane (20mL×3). The combined organic phases were washed with saturated aqueous sodium chloride (30mL), dried over sodium sulfate, and filtered. The solvent was evaporated under vacuum. The residue was purified on a silica gel chromatography using mixtures of petroleum/acetone as eluent to obtain the oil products 4-7.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, N-(6-Bromohexyl)phthalimide, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Sang, Zhipei; Qiang, Xiaoming; Li, Yan; Xu, Rui; Cao, Zhongcheng; Song, Qing; Wang, Ting; Zhang, Xiaoyu; Liu, Hongyan; Tan, Zhenghuai; Deng, Yong; European Journal of Medicinal Chemistry; vol. 135; (2017); p. 307 – 323;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 356068-93-4, name is (Z)-5-((5-Fluoro-2-oxoindolin-3-ylidene)methyl)-2,4-dimethyl-1H-pyrrole-3-carboxylic acid, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C16H13FN2O3

EXAMPLE 3: Preparation of 7V-(3-(hvdroxycarbamoyl)propyl)5-(TZ)- (5- fluoro-2-oxoindolin-3-ylidene)methyl)-2,4-dimethyl-lH-pyrrole- 3-carboxamide (compound 3) Step 3a. Methyl 4-(5-((Z)-(5-fluoro-2-oxoindolin-3-ylidene)methyl) -2,4- dimethyl- lH-pyrrole-3-carboxamido)butanoate (Compound 110-3) To a stirred solution of compound 1 (0.5 g, 1.67 mmol) in DMF (35 mL) at room temperature was added etaOBt (1.02 g, 7.52 mmol), triethylamine(2.12 mL, 15.03 mmol), ECDI-HCl(1.44 g, 1.52 mmol) and methyl 4-aminobutanate hydrochloride(0.77 g, 5.0 mmol) successively. The mixture was stirred for 24 h at room temperature and then was diluted with water (20 mL), brine (20 mL) and saturated bicarbonate solution (20 mL) and the pH of solution was adjusted to 11-12 with 10 mol/L NaOH. The mixture was filtrated, the solid was collected, washed with water and dried to obtain crude yellow solid product 110-3 (0.32 g, 48.3%). LCMS: m/z 400(M+l), 1H NMR(DMSO-^6) deltal.77 (m, 2H), 2.39 (m, 4H), 2.42 (s, 3H), 2.49 (s, 3H), 3.23 ( t, 2H), 6.85 (m, 2H), 7.60 (t, IH), 7.67 (s, IH), 7.71 (m, IH), 10.89 (s, IH), 13.68 (s, IH).

According to the analysis of related databases, 356068-93-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; CURIS, INC.; WO2008/33743; (2008); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 24566-79-8, name is N-(6-Bromohexyl)phthalimide, A new synthetic method of this compound is introduced below., name: N-(6-Bromohexyl)phthalimide

General procedure: A mixture of the intermediates 3a-3e (5 mmol) and corresponding secondary amine 4a-4g (5.5 mmol) was added in CH3CN (20 ml) at the presence of anhydrous K2CO3 (6 mmol). The mixture was heated at 65 C for 6-10 h. The solvent was evaporated in vacuo. The residue was dissolved in CH2Cl2 (25 mL), washed with water (20 mL × 3), and the combined organic phases were washed with saturated aqueous NaCl (30 mL), dried over sodium sulfate, and filtered. The solvent was evaporated under reduced pressure. The residue was purified on a silica gel chromatography using mixtures of petroleum/acetone as eluent to get the target products TM-1~TM-28.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Sang, Zhipei; Wang, Keren; Wang, Huifang; Yu, Lintao; Wang, Huijuan; Ma, Qianwen; Ye, Mengyao; Han, Xue; Liu, Wenmin; Bioorganic and Medicinal Chemistry Letters; vol. 27; 22; (2017); p. 5053 – 5059;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 17702-83-9, name is 2-(8-Bromooctyl)isoindoline-1,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 17702-83-9

a) Preparation of 8-pyrrolidinyloctylphthalimide 8-Bromooctylphthalimide (517 mg; 2.0 mmoles) and pyrrolidine (0.33 ml; 4.0 mmoles) were dissolved in anhydrous ethyl ether (5 ml). Reaction times and process as per Example 1. 348 mg of pure product were obtained. Yield 53percent.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 17702-83-9.

Reference:
Patent; MEDIOLANUM FARMACEUTICI S.P.A.; EP575954; (1993); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1168150-46-6 as follows. Computed Properties of C18H15NO4

(E)-methyl- 3-(methoxy(phenyl) methylene)-2-indolone-6- methyl formate (9-2) (200mg, 0.64mmol) and N- (4-aminophenyl) -N-methyl-2- (4- Trideutero methylpiperazin-1-substituted) acetamide (15-2) (171mg, 0.65mmol) in methanol (1.8mL) was refluxed for 8h , slowly cooled to 10 , stirring was continued at 10 1h, suction filtered, washed with cold methanol, and dried to give 310mg (89%) as a yellow solid, compound (Zeta)-3-((4-(Nu- methyl-2-(4- Trideutero methylpiperazin-1-substituted) acetamide)anilino(phenyl) methylene)-2-indolone-6- methyl formate

According to the analysis of related databases, 1168150-46-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Sichuan University; Chen, Yuanwei; Xie, Yongmei; Wei, Yuquan; (32 pag.)CN104003925; (2016); B;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 446292-07-5, name is (R)-2-(2-Hydroxy-3-((4-(3-oxomorpholino)phenyl)amino)propyl)isoindoline-1,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C21H21N3O5

100 g (R)-2-(2-hydroxy-3-(4-(3-oxo-morpholino) phenyl amino) propyl) isoindoline-i ,3-dione of Formula (F) and MDC (i000 ml) were added to REF at 25 C. to 35 C. and heated to 40 C. to 45 C. Further, 6i g N,N-Carbonyl diimidazole (CDI) and 0.5 g DMAP were added and stirred for 3-4 hours. Excess MDC was evaporated under, reduced pressure. The reaction mass was cooled to 25 C. to 35 C. followed by addition of dilute HC1 solution and stirred for i hour and finally filtered and washed with 2×200 ml water to afford title compound as (S)-2-((2-oxo-3-(4-(3-oxo-mor- pholino)phenyl)oxazolidin-5-yl)methyl)isoindoline- i ,3-di- one of Formula (I).Excess MDC was evaporated under, reduced pressure. The reaction mass was cooled to 25 C. to 35 C. followed by addition of dilute HCl solution and stirred for 1 hour and finally filtered and washed with 2*200 ml water to afford title compound as (S)-2-((2-oxo-3-(4-(3-oxo-morpholino)phenyl)oxazolidin-5-yl)methyl)isoindoline-1,3-dione of Formula (I).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 446292-07-5.

Reference:
Patent; CADILA HEALTHCARE LIMITED; Dwivedi, Shriprakash Dhar; Prasad, Ashok; Pal, Daya Ram; Sharma, Mukul Hari Prasad; Jain, Kuldeep Natwarlal; Patel, Naitik Bharatbhai; US2014/378682; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem