Tag: M.W=200-300

Reference of 104618-32-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 104618-32-8 as follows.

Example 11 3-Amino-6-(N-methylsulphonamidomethyl)-1,2,3,4-tetrahydrocarbazole oxalate Reaction of 4-phthalimidocyclohexanone (0.42 g) with 4-(N-methylsulphonamidomethyl) phenyl hydrazine hydrochloride (0.44 g), and subsequent deprotection by the method described in example 3, gave the title compound free base. This was treated with oxalic acid to give the oxalate salt (0.15 g), mp 218-222 C. dec.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 104618-32-8.

Reference:
Patent; Smithkline Beecham plc; US5827871; (1998); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 6326-79-0, Chemical engineers ensure the efficiency and safety of chemical processes, adapt the chemical make-up of products to meet environmental or economic needs, and apply new technologies to improve existing processes.

The mixture of IX-1 (6.5 g, 28.7 mmol), malonic acid (3.3 g, 31.7 mmol), NaOAc (2.95 g, 36 mmol) in AcOH (60 mL) were stirred at rt. After 6 hrs, NaOAc (2.95 g, 36 mmol) was added additional, then refluxed overnight. After cooling, the mixture was filtered and the filtrate was washed with water and EtOAc, then dried under reduced pressure to afford IX-2 (5 g, yield 66%) as a brown oil, which was used for next step directly.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 6-Bromoisatin, and friends who are interested can also refer to it.

Reference:
Patent; Buckman, Brad Owen; Nicholas, John Beamond; Emayan, Kumaraswamy; Seiwert, Scott D.; US2014/200215; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1254319-51-1, name is 6-Bromo-2-methylisoindolin-1-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Related Products of 1254319-51-1

6-Bromo-2-raethylisoindolin-l-one (723 mg, 3.41 mmol), bis(pinacolato)diboron (1.04 g, 4.09 mmol), potassium acetate (1.00 g, 10.2 mmol) and PdCl2(dppf) catalyst (139 mg, 0.17 mmol) were weighed into a flask which was sealed under N2. DMSO (15 mL) was added, and the entire mixture stirred at 90C for 5 h. Upon cooling, the reaction mixture was diluted with water (250 mL) and extracted with CH2C12 (5×50 mL). The combined CH2C12 fractions were in turn washed with water (2×100 mL), brine (100 mL), dried (Na2S04), filtered and the solvent removed under reduced pressure to yield the crude product. Purification was carried out by flash column chromatography on silica gel (20% THF/CH2C12 as eluant) to give the title compound as a crystalline beige solid (262 mg, 28%). NMR [400 MHz, (CD3)2SO] delta 7.91 (br s, 1 H), 7.85 (dd, J = 7.6, 1.0 Hz, 1 H), 7.59 (dd, J = 7.5, 0.6 Hz, 1 H), 4.49 (s, 2 H), 3.07 (s, 3 H), 1.32 (s, 12 H). LRMS (APCI+) calcd for Ci5H2iBN03 274 (MH+), found 274.

The synthetic route of 1254319-51-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PETER MACCALLUM CANCER INSTITUTE; SPICER, Julie Ann; HUTTUNEN, Kristiina Maria; LYONS, Dani Michelle; TRAPANI, Joseph Albert; SMYTH, Mark John; DENNY, William Alexander; WO2011/75784; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Chemical research careers are more diverse than they might first appear, as there are many different reasons to conduct research and many possible environments. category: indolines-derivatives

0.69 ml of n-Butyl lithium (2.5M solution in hexane) was added dropwise to a stirred solution of 5-bromo-1,3-dihydro-isoindole-2-carboxylic acid tert-butyl ester (429 mg; 1.44 mmol) in anhydrous THF (10 ml) at -78 C. under an atmosphere of nitrogen. The reaction was stirred for 50 minutes then 1-methyl-4-piperidone (212 mul; 1.2 equiv.) was added and stirred at -78 C. for a further 60 minutes then warmed to room temperature. The reaction was quenched with saturated ammonium chloride solution then extracted with EtOAc. The EtOAc layer was washed with saturated NaHCO3, brine, dried (MgSO4) and evaporated. Purification by flash column chromatography on SiO2, gradient elution from 0% to 10% 2M methanolic ammonia/DCM gave 111 mg of 5-(4-hydroxy-1-methyl-piperidin-4-yl)-1,3-dihydro-isoindole-2-carboxylic acid tert-butyl ester as a colourless oil.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; ASTEX THERAPEUTICS LIMITED; US2010/152184; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 2058-72-2, The chemical industry reduces the impact on the environment during synthesis 2058-72-2, name is 5-Bromo-1-methylindoline-2,3-dione, I believe this compound will play a more active role in future production and life.

General procedure: A mixture of isatin 2 (0.8 mmol), malononitrile (1.0 mmol) and Ca(OH)2 (0.8 mmol, 59.2 mg) in 5.0 mL of methanol was stirred at roomtemperature for 10 min followed by the addition of chrysin 1(0.5 mmol), which was stirred under reflux for 8 h. After completion ofthe reaction, as indicated by TLC, the mixture was cooled to roomtemperature and then purified by flash chromatography to afford thecorresponding product 3.

Because a catalyst decreases the height of the energy barrier, its presence increases the reaction rates of both the forward and the reverse reactions by the same amount.Read on for other articles about 2058-72-2.

Reference:
Article; Zhang, Wen-Hui; Chen, Shuang; Liu, Xiong-Li; Feng, Ting-Ting; Yang, Wu-De; Zhou, Ying; Bioorganic and Medicinal Chemistry; vol. 27; 22; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Healthcare careers for chemists are once again largely based in laboratories, although increasingly there is opportunity to work at the point of care, helping with patient investigation., 15362-40-0

To the four-necked flask was added 668 ml of water and then compound IV (233 g, 0.84 mol), potassium hydroxide (94.3 g,1.68 mol), heated to 100 C for 5 hours, cooled to 60 C to 65 C,Vacuum filter, add a small amount of water, filter cake at 85 CAfter dissolution in water, zinc chloride (229 g, 1.68 mol 1) in water was added, reacted at 85 C for 1 hour,Cooling, filtration was white solid 488.5g (compound I: diclofenac zinc), the yield of 89%

As always, wish you can browse a selection of our May HOT articles below about 1-(2,6-Dichlorophenyl)-2-indolinone.

Reference:
Patent; Jilin University; Liaoyuan Yinying Pharmaceutical Co., Ltd.; Li Guiying; Wang Zhaokun; Li Shumei; Peng Xiaojuan; Jin Xingtong; (8 pag.)CN106905178; (2017); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Chemistry graduates have much scope to use their knowledge in a range of research sectors, including roles within chemical engineering, chemical and related industries, healthcare and more. , Formula: C8H3Cl2NO2

4,7-Dichloroisotin (30.05 g, 139.1 mmol, 1.0 equiv, Alfa Aesar lot 10173559) and MeOH (450 mL, 15 vol) were charged to a 2-L, three-neck, round-bottom flask equipped with nitrogen line, overhead mechanical stirrer, and a temperature probe. Diethylamine (3.25 g, 0.32 equiv, Sigma- Aldrich lot SHBD5313V) was added over 3 min (the slurry becomes dark red). A very slight increase in temperature (from 17.5 C to 18.8 C) was observed. 1- [4-(Dimethylamino)phenyl]ethanone 2 (44.3 g, 1.95 equiv, ArkPharm lot 0000197- 130717000) was then added via a plastic funnel and the funnel was rinsed with MeOH (75 mL, 2.5 vol). A decrease in the reaction temperature to 15.1 C was observed. Upon stirring for a few minutes, a dark red solution with a few undissolved particles was obtained. The solution was stirred at ambient temperature and periodically sampled for in-process control (IPC) by HPLC. After 23 h of reaction, additional diethylamine was added via syringe (1.42 g, 0.14 equiv) and the stirring continued at ambient temperature. After 40.5 h, a light slurry formed. Solid 2 was added in portions (54.1 g, 2.38 equiv, ArkPharm lot 0000197- 130717000 and 3.2 g, 0.14 equiv, TCI lot GK01-BRAH) for a total of 4.47 equiv of acetophenone 2. After 88 h of reaction, IPC by HPLC showed less than 1% AUC of isatin 1 present in the reaction mixture. A heavy precipitate had formed. After 4.5 days, the reaction mixture was concentrated under reduced pressure (water bath <40 C), then under high vacuum to afford approximately 84 g of a solid mixture, lot BIO-W-22-11. The solid was dissolved in a mixture of dichloromethane (385 mL) and MeOH (140 mL) and adsorbed over 100 g of silica gel. The solvent was removed under reduced pressure and the dry product/silica mixture was loaded onto a column containing silica gel (1 kg, pre-packed with heptanes) for a flash chromatographic purification. Elution was started with 10% ethyl acetate in heptanes and a gradient up to 100% ethyl acetate was applied, and then switched to 10% methanol in ethyl acetate. Fractions of 500 mL and up to 2 L were collected. The product containing fractions, where product had started to precipitate, were combined and concentrated down to approximately 1 L. The resulting precipitate was filtered out, reslurried in EtOAc/MeOH (75:25 ratio, 200 mL), filtered, and washed with MeOH to afford a first crop of compound. The first filtrate was concentrated to a low volume, added MeOH to precipitate a second crop of compound. Filtrates from isolation of both crops were combined, concentrated to a low volume, taken up in 25 mL of MeOH, and the resulting solid was filtered to afford a third crop of compound. All three crops were dried under high vacuum at ambient temperature for a day and at 40 C for four days. The total combined weight was 40.03 g, corresponding to 76% yield of compound (uncorrected by purity or solvent content). Solid is off-white (with a very pale yellow to peach shade. The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 18711-13-2. Reference:
Patent; TOKALAS, INC.; VERNIER, Jean-michael; (82 pag.)WO2016/57698; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 18711-15-4,The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research.

(i) 3-Hydroxy-4,6-dichloro-1,3-dihydro-3-(benzofuran-5-yl)indole-2-one 2.25 g of magnesium for a Grignard reaction in 15 ml of anhydrous THF are placed in a round-bottomed flask equipped with a mechanical stirrer, and under a stream of nitrogen. A mixture of 13.6 g of 5-bromobenzofuran in 35 ml of anhydrous THF is then added. The mixture is stirred for one hour, followed by addition of a solution of 5 g of 4,6-dichloro-1H-indole-2,3-dione in 50 ml of anhydrous THF. The mixture is stirred at room temperature for 4 hours 30 minutes. Water is added and the resulting mixture is extracted with ethyl acetate. The organic phase is separated out, dried over Na2SO4, filtered and evaporated under vacuum. The residue is taken up in ethyl acetate and washed with 1N sodium hydroxide solution. The organic phase is dried over Na2SO4, filtered and evaporated under vacuum. The solid is taken up in ethyl ether and filtered off. 4.2 g of expected product are obtained.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4,6-Dichloroisatin, its application will become more common.

Reference:
Patent; SANOFI; US2011/312972; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In chemical reaction engineering, simulations are useful for investigating and optimizing a particular reaction process or system., name: 2,3-Dioxoindoline-5-sulfonyl chloride

(S)-5-(2-(4-Fluorophenoxymethyl)-pyrrolidine-1-sulfonyl)isatin (compound 20b). To a stirred solution of 19b (0.15 g, 0.5 mmol) in dry DCM (4 mL) cooled in an ice bath was added TFA (0.6 mL, 10 mmol). After 1 h bulk solvent was removed in vacuo and the residue remaining taken up in dry DCM (8 mL) and cooled in an ice bath. Dry triethylamine (1.5 mL) was then added followed by 5-chlorosulfonylisatin8 (0.16 g, 0.65 mmol) in dry THF (4 mL) and the solution was then stirred. After 19 h bulk solvent was removed in vacuo and redissolved in DCM (10 mL), washed with water (2*10 mL), then brine (1*10 mL) and dried over Na2SO4. Chromatography (hexanes/ethyl acetate) gave the desired product as an orange solid (104 mg, 51%). Mp: 205-207 C. HRMS (ESI)=405.0941 (M+H)+. Calcd. for C19H18FN2O5S 405.0920. 1H NMR (600 MHz, CDCl3) delta 8.10 (s, 1H), 8.08 (dd, J=8.4 Hz, J=1.8 Hz, 1H), 8.00 (br, 1H), 7.00 (d, J=7.8 Hz, 1H), 6.99-6.95 (m, 2H), 6.83-6.81 (m, 2H), 4.17 (dd, J=9.6 Hz, J=3.6 Hz, 1H), 3.98-3.95 (m, 1H), 3.91 (dd, J=9 Hz, J=7.8 Hz, 1H), 3.54-3.50 (m, 1H), 3.24-3.19 (m, 1H), 2.10-1.99 (m, 2H), 1.87-1.77 (m, 2H). TLC (UV254) Rf=0.27 (2:1 ethyl acetate/hexanes). HPLC tR=7.83

The synthetic route of 132898-96-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Imperial Innovations Limited; Hammersmith Imanet Limited; US2011/195024; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 3335-98-6, Researchers are common within chemical engineering and are often tasked with creating and developing new chemical techniques, frequently combining other advanced and emerging scientific areas.

Example 1Preparation of Compound 1 Sodium hydride (50% dispersion in mineral oil, 0.235 g, 4.8 mmol) was added to a stirred solution of 1,3-dihydro-1-phenyl-2H-indol-2-one 1a (2.0 g, 9.6 mmol) in dimethylacetamide (25 mL). To the resulting solution was added bis(2-chloroethyl)amine (1.7 g, 9.6 mmol) in benzene (25 mL) at room temperature. The resulting reaction was heated to about 50 C. and allowed to stir at this temperature for 0.5 hours, then additional sodium hydride (0.235 g, 4.8 mmol) was added and stirring was continued for 2 hours. The reaction mixture was cooled to room temperature, diluted with benzene and treated with water. The organic phase was dried over MgSO4, filtered and concentrated in vacuo to provide compound 1b.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Phenyloxindole, its application will become more common.

Reference:
Patent; McCormick, Kevin D.; Aslanian, Robert G.; Mangiaracina, Pietro; Berlin, Michael Y.; De Lera Ruiz, Manuel; Boyce, Christopher W.; Chao, Jianhua; Ting, Pauline C.; Zheng, Junying; Rosenblum, Stuart B.; US2011/166124; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem