Category: 897957-06-1

We’ll be discussing some of the latest developments in chemical about CAS: 897957-06-1. Synthetic Route of 897957-06-1

To I-12.2 (32.0 g, 142 mmol) in anhydrous dioxane (400 mL) is added R3 (54.4 g, 241 mmol) and potassium acetate (41.6 g, 424 mmol). The mixture is purged with Argon, [1,1?-Bis(diphenylphosphino)ferrocene]dichloropalladium(II) as a complex with dichloromethane (11.2 g, 14 mmol) is added and the mixture is heated to 90 C. for 2 h. The reaction mixture is diluted with ethyl acetate and water, the organic layer is washed with water, dried over MgSO4 and concentrated. The residue is purified via flash chromatography (cyclohexane/EA=70:30). Yield 72%, m/z 274 [M+H]+, rt 0.67 min, LC-MS Method V011_S01.

You can get involved in discussing the latest developments in this exciting area about 6-Bromo-1-methylindolin-2-one.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ANDERSKEWITZ, Ralf; BINDER, Florian; GRAUERT, Matthias; GRUNDL, Marc; HAEBEL, Peter Wilhelm; OOST, Thorsten; PAUTSCH, Alexander; PETERS, Stefan; VINTONYAK, Viktor; US2014/275025; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Academic researchers, R&D teams, teachers, students, policy makers and the media all rely on us to share knowledge that is reliable, accurate and cutting-edge. Computed Properties of C9H8BrNO

General procedure: Under N2, sodium ( 0.5 g ) was reacted with 30 ml ethanol. When the solution was clear,2.9 g N-Me oxindole was added followed by 3.1 g diethyl carbonate and the resulting reactionmixture was refluxed for 15 hours. Then cooled to room temperature and added to 3Nhydrochloric acid solution ( pH = 2 ). The resulting solution was extracted with ether for threeEntry Catalyst time (h) yieldb(%) drc eed(%)1 3e 5 96 72:28 38e/382 3f 8 96 74:26 21e/33 3g 2 99 73:27 11e/334 3h 8 96 71:29 6e/335 3i 2 95 59:41 1e/26 3j 10 94 68:31 44/1e7 3k 2 93 67:33 1/18 3l 72 61 69:31 8/1times. The organic extracts were combined and dried over magnesium sulfate. Thenconcentrated in vacuo and washed with petroleum ether to give 2.7 g2-oxindole-3-carboxylates 1a (61%) as light yellow solid.

You can get involved in discussing the latest developments in this exciting area about 6-Bromo-1-methylindolin-2-one.

Reference:
Article; Zhou, Jing; Jia, Li-Na; Peng, Lin; Wang, Qi-Lin; Tian, Fang; Xu, Xiao-Ying; Wang, Li-Xin; Tetrahedron; vol. 70; 21; (2014); p. 3478 – 3484;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 897957-06-1, name is 6-Bromo-1-methylindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 6-Bromo-1-methylindolin-2-one

To I-3.2 (32.0 g, 142 mmol) in anhydrous dioxane (400 mL) is added R8 (54.4 g, 241 mmol) and potassium acetate (41.6 g, 424 mmol). The mixture is purged with Argon, [1,1?-Bis(diphenylphosphino)ferrocene]dichloropalladium(II) as a complex with dichloromethane (11.2 g, 14 mmol) is added and the mixture is heated to 90 C. for 2 h. The reaction mixture is diluted with ethyl acetate and water, the organic layer is washed with water, dried over MgSO4 and concentrated. The residue is purified via flash chromatography (cyclohexane/EA=70:30). Yield 72%, m/z 274 [M+H]+, rt 0.67 min, LC-MS Method V011_S01.

According to the analysis of related databases, 897957-06-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; GRAUERT, Matthias; ANDERSKEWITZ, Ralf; GRUNDL, Marc; OOST, Thorsten; PAUTSCH, Alexander; PETERS, Stefan; US2014/275155; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 897957-06-1, The chemical industry reduces the impact on the environment during synthesis 897957-06-1, name is 6-Bromo-1-methylindolin-2-one, I believe this compound will play a more active role in future production and life.

To I-12.2 (32.0 g, 142 mmol) in anhydrous dioxane (400 mL) is added R3 (54.4 g, 241 mmol) and potassium acetate (41.6 g, 424 mmol). The mixture is purged with Argon, [1,1?-Bis(diphenylphosphino)ferrocene]dichloropalladium(II) as a complex with dichloromethane (11.2 g, 14 mmol) is added and the mixture is heated to 90 C. for 2 h. The reaction mixture is diluted with ethyl acetate and water, the organic layer is washed with water, dried over MgSO4 and concentrated. The residue is purified via flash chromatography (cyclohexane/EA=70:30). Yield 72%, m/z 274 [M+H]+, rt 0.67 min, LC-MS Method V011_S01.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Bromo-1-methylindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ANDERSKEWITZ, Ralf; BINDER, Florian; GRAUERT, Matthias; GRUNDL, Marc; HAEBEL, Peter Wilhelm; OOST, Thorsten; PAUTSCH, Alexander; PETERS, Stefan; VINTONYAK, Viktor; US2014/275025; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 897957-06-1, name is 6-Bromo-1-methylindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 897957-06-1

To I-5.2 (32.0 g, 142 mmol) in anhydrous dioxane (400 mL) is added R11 (54.4 g, 241 mmol) and potassium acetate (41.6 g, 424 mmol). The mixture is purged with Argon, [1,1?-Bis(diphenylphosphino)ferrocene]dichloropalladium(II) as a complex with dichloromethane (11.2 g, 14 mmol) is added and the mixture is heated to 90 C. for 2 h. The reaction mixture is diluted with ethyl acetate and water, the organic layer is washed with water, dried over MgSO4 and concentrated. The residue is purified via flash chromatography (cyclohexane/EA=70:30). Yield 72%, m/z 274 [M+H]+, rt 0.67 min, LC-MS Method V011_S01.

According to the analysis of related databases, 897957-06-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ANDERSKEWITZ, Ralf; GRAUERT, Matthias; GRUNDL, Marc; OOST, Thorsten; PAUTSCH, Alexander; PETERS, Stefan; US2014/275159; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 897957-06-1, These common heterocyclic compound, 897957-06-1, name is 6-Bromo-1-methylindolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 3: Synthesis of Intermediate R7 To 1-12.2 (32.0 g, 142 mmol) in anhydrous dioxane (400 mL) is added R3 (54.4 g, 241 mmol) and potassium acetate (41.6 g, 424 mmol). The mixture is purged with Argon, [1, – Bis(diphenylphosphino)ferrocene]dichloropalladium(II) as a complex with dichloromethane (11.2 g, 14 mmol) is added and the mixture is heated to 90 C for 2 h. The reaction mixture is diluted with ethyl acetate and water, the organic layer is washed with water, dried over MgS04 and concentrated. The residue is purified via flash chromatography (cyclohexane / EA = 70:30). Yield 72%, m/z 274 [M+H]+, rt 0.67 min, LC-MS Method V011_S01.

Statistics shows that 6-Bromo-1-methylindolin-2-one is playing an increasingly important role. we look forward to future research findings about 897957-06-1.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ANDERSKEWITZ, Ralf; GRAUERT, Matthias; GRUNDL, Marc; HAEBEL, Peter, Wilhelm; OOST, Thorsten; PAUTSCH, Alexander; PETERS, Stefan; BINDER, Florian; VINTONYAK, Viktor; WO2014/140075; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 897957-06-1, name is 6-Bromo-1-methylindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 897957-06-1, HPLC of Formula: C9H8BrNO

General procedure: Under N2, sodium ( 0.5 g ) was reacted with 30 ml ethanol. When the solution was clear,2.9 g N-Me oxindole was added followed by 3.1 g diethyl carbonate and the resulting reactionmixture was refluxed for 15 hours. Then cooled to room temperature and added to 3Nhydrochloric acid solution ( pH = 2 ). The resulting solution was extracted with ether for threeEntry Catalyst time (h) yieldb(%) drc eed(%)1 3e 5 96 72:28 38e/382 3f 8 96 74:26 21e/33 3g 2 99 73:27 11e/334 3h 8 96 71:29 6e/335 3i 2 95 59:41 1e/26 3j 10 94 68:31 44/1e7 3k 2 93 67:33 1/18 3l 72 61 69:31 8/1times. The organic extracts were combined and dried over magnesium sulfate. Thenconcentrated in vacuo and washed with petroleum ether to give 2.7 g2-oxindole-3-carboxylates 1a (61%) as light yellow solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Bromo-1-methylindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Zhou, Jing; Jia, Li-Na; Peng, Lin; Wang, Qi-Lin; Tian, Fang; Xu, Xiao-Ying; Wang, Li-Xin; Tetrahedron; vol. 70; 21; (2014); p. 3478 – 3484;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

897957-06-1, name is 6-Bromo-1-methylindolin-2-one, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. SDS of cas: 897957-06-1

A solution of {S)-tert-hvXy 4-(l-amino-l-oxo-3-(4-(4,4,5,5-tetramethyl-l,3,2-dioxaborolan-2- yl)phenyl)propan-2-ylcarbamoyl)tetrahydro-2H-pyran-4-ylcarbamate (Example 16, step (i), 200 mg) and 6-bromo-l-methylindolin-2-one (87 mg) in acetonitrile (5 mL) was treated with potassium carbonate (107 mg) and purged with nitrogen. 1,1 bis(Di-tert- butylphosphino)ferrocene palladium dichloride (15 mg) was added and the reaction stirred under reflux under nitrogen for 4 h and then evaporated in vacuo. The residue was partitioned between water (40 mL) and ethyl acetate (40 mL). The aqueous was further extracted with ethyl acetate (40 mL) and the combined organic extracts were dried over magnesium sulfate and evaporated in vacuo. The crude product was purified by flash silica chromatography eluting with ethyl acetate. Pure fractions were evaporated to dryness to afford the sub-titled compound (45 mg).1H NMR (399.824 MHz, CDCl3) delta 7.54 (d, 2H), 7.32 – 7.28 (m, 3H), 7.22 (d, IH), 6.97 (s, IH), 6.88 – 6.80 (m, IH), 6.49 (d, IH), 5.27 (s, IH), 4.90 (s, IH), 4.80 (q, IH), 3.89 – 3.82 (m, IH), 3.69 – 3.62 (m, IH), 3.60 – 3.48 (m, 4H), 3.32 – 3.18 (m, 5H), 2.33 – 2.24 (m, IH), 1.92 – 1.76 (m, 2H), 1.35 (s, 9H).m/e (Multimode+) 437 [M+2H-BOC]+

The synthetic route of 897957-06-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; FORD, Rhonan; METE, Antonio; MATHER, Andrew; MILLICHIP, Ian; WO2010/128324; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 897957-06-1, A common heterocyclic compound, 897957-06-1, name is 6-Bromo-1-methylindolin-2-one, molecular formula is C9H8BrNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To 1-3.2 (32.0 g, 142 mmol) in anhydrous dioxane (400 mL) is added R8 (S4.4 g, 241 mmol) andpotassium acetate ( 41.6 g, 424 mmol). The mixture is purged with Argon, [1 , 1’Bis(diphenylphosphino)ferrocene]dichloropalladium(IJ) as a complex with dichloromethane ( 11 .2g, 14 mmol) is added and the mixture is heated to 90 C for 2 h. The reaction mixture is diluted with ethyl acetate and water, the organic layer is washed with water, dried over MgS04 and concentrated. The residue is purified via flash chromatography (cyclohexane I EA = 70:30). Yield72%, m/z 274 [M+H]+, 11 0.67 min, LC-MS Method Y011_S01.

The synthetic route of 897957-06-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; GRAUERT, Matthias; ANDERSKEWITZ, Ralf; GRUNDL, Marc; OOST, Thorsten; PAUTSCH, Alexander; PETERS, Stefan; WO2014/140081; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

897957-06-1, name is 6-Bromo-1-methylindolin-2-one, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Computed Properties of C9H8BrNO

Step 3: Synthesis of Intermediate R7 [0295] To I-4.2 (32.0 g, 142 mmol) in anhydrous dioxane (400 mL) is added R3 (54.4 g, 241 mmol) and potassium acetate (41.6 g, 424 mmol). The mixture is purged with Argon, [1,1?-Bis(diphenylphosphino)ferrocene]dichloropalladium(II) as a comple× with dichloromethane (11.2 g, 14 mmol) is added and the mixture is heated to 90 C. for 2 h. The reaction mixture is diluted with ethyl acetate and water, the organic layer is washed with water, dried over MgSO4 and concentrated. The residue is purified via flash chromatography (cyclohexane/EA=70:30). Yield 72%, m/z 274 [M+H]+, rt 0.67 min, LC-MS Method V011_S01

The synthetic route of 897957-06-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ANDERSKEWITZ, Ralf; GRUNDL, Marc; MORSCHHAEUSER, Gerd; OOST, Thorsten; PAUTSCH, Alexander; US2014/275114; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem