Category: 883-44-3

These common heterocyclic compound, 883-44-3, name is 2-(3-Hydroxypropyl)isoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 883-44-3

4-hydroxycoumarin (6.17 mmol, 1.0 g), PPh3 (6.48 mmol, 1.70 g), and 2-(3-hydroxy-propyl)-isoindole-1,3-dione (6.48 mmol, 1.33 g) is disolved in 20 mL THF and is cooled to 0 C. DIAD (6.79 mmol, 1.33 mL) is added dropwise at 0 C. A precipitate is formed immediately and the reaction mixture thickens. The precipitate is filtered, is washed with Et2O and is dried to afford the title compound (1.62 g, 75%). 1H NMR (DMSO-d6, 300 MHz) delta 7.82 (4H, m), 7.61 (2H, m), 7.37 (1H, m), 7.21 (1H, m), 5.83 (1H, s), 4.28 (2H, t, J=5.75 Hz), 3.83 (2H, t, J=6.25 Hz), 2.19 (2H, m); MS (ESI, Pos.) calcd for C20H15NO5 m/z [M+H]=350.1, found 350.1.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(3-Hydroxypropyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Aventis Pharmaceuticals Inc.; US2005/54681; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 883-44-3, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 883-44-3 as follows.

INTERMEDIATE 3; 3-(fert-Butyldimethylsilanyloxy)propylamine; To a solution of N-(3-hydroxypropyl)phthalimide (5.25 g, 24.36 mmol) in DMF (20 niL) was added imidazole (16.6 g, 240 mmol) and tert-butyldimethylsilyl chloride (19 g, 120 mmol). The reaction was stirred at room temperature for 18 hours before the volatiles were removed in vacuo and a portion of the crude product was subjected to column chromatography (SiO2, 1:1 DCM/hexanes) to give 2-[3-(tert-butyldimethyl- silanyloxy)propyl]isoindole-l,3-dione as a clear oil (5 g). 2-[3-(tert-Butyldimetliyl- silanyloxy)propyl]isoindole-l,3-dione (5 g, 26.4 mmol) was dissolved in ethanol (50 ml) and methyl hydrazine (2.94 ml, 55.4 mmol) added. The reaction was heated to 75C for 8 hours before concentration in vacuo. The crude residue was triturated with a mixture of diethyl ether (150 mL) and hexanes (50 niL) and the resultant solid removed by filtration. The solvents were removed in vacuo to give the title compound as a pale yellow oil (1.8 g, 61%). deltaH (DMSOd6) 4.58 (2H, br s), 3.63-3.58 (2H, m), 2.67-2.62 (2H, m), 1.60-1.55 (2H, m), 0.83 (9H, d, J 1.1 Hz), 0.00 (6H, d, J 1.2 Hz). LCMS (ES+) RT 1.77 minutes, 190 (M+H)+.

According to the analysis of related databases, 883-44-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; UCB PHARMA S.A.; WO2007/88345; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 883-44-3, A common heterocyclic compound, 883-44-3, name is 2-(3-Hydroxypropyl)isoindoline-1,3-dione, molecular formula is C11H11NO3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

N1-Boc-N4-Nbs-N4-(3-propyl-1-phthalimide)-trans-1,4-diaminocyclohexaneA solution of 310 mg (0.78 mmol) of N4-Boc-N1-Nbstrans-1,4-diaminocyclohexane was dissolved in 20 mL of 1:3 CH2Cl2/benzene together with 254 mg (0.97 mmol) of Ph3P and 127 mg (0.62 mmol) of N-(3-hydroxypropyl)phthalimide. The resulting solution was stirred at 25 C. under argon. To this solution was added 191 L (0.97 mmol) of a 40% solution of DIAD in toluene dropwise. After addition was complete, stirring was continued for an additional 18 hours. The solution was evaporated to dryness and the crude oil purified on silica gel eluting first with 8:2 Hexane/EtOAc then with 1:1 Hexane/EtOAc to give a total of 322 mg (89%) of product as a clear oil (Rf 0.35 (1:1 Hexane/EtOAc

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Burns, Mark R.; McVean, Maralee; Kennedy, Kevin J.; Yeung, Arthur; Devens, Bruce H.; US2004/235960; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 883-44-3, name is 2-(3-Hydroxypropyl)isoindoline-1,3-dione, A new synthetic method of this compound is introduced below., HPLC of Formula: C11H11NO3

Compound 359l-(3-((((2R^S,4R,5R)-5 6-amino-9H-purin-9-yl)-3,4-dihydroxytetrahydrofuran-2- yl)methyl)(isopropyl)amino)propyl)-3-(3-chlorophenyl)ureaStep 1. Preparation of 2-(3-((((3aR,4R,6R,6aR)-6-(6-amino-9H-purin-9-yl)-2,2- dimethyltetrahydrofuro[3,4-d][l,3]dioxol-4-yl)methyl)amino)propyl)isoindoline-l,3- dioneTo a solution of 2-(3-hydroxypropyl)isoindoline-l,3-dione (1.0 g, 4.88 mmol) in EA (50 mL) was added IBX (3.4 g, 12.19 mmol). The mixture was heated to reflux for 2h. After cooling, the mixture was filtered and the filtrate was concentrated to give 3-(l,3- dioxoisoindolin-2-yl)propanal crude (not weight), which was directly used for next step.To a solution of 9-((3aR,4R,6R,6aR)-6-(aminomethyl)-2,2- dimethyltetrahydrofuro[3,4-d][l,3]dioxol-4-yl)-9H-purin-6-amine (1.5 g, 4.90 mmol) and 3- (l ,3-dioxoisoindolin-2-yl)propanal (from last step) in DCE (50 mL) was added NaBH(OAc)3 (1.56 g, 7.30 mmol). The reaction mixture was stirred at rt overnight then saturated NaHC03 aqueous solution (50 mL) was added. The resulting mixture was extracted with DCM (50 mL x 2). The combined organic layers were dried over Na2S04 and concentrated. The residue was purified by SGC (DCM : MeOH = 100 : 1 to 10 : 1) to afford the title compound (1.38 g, yield: 57%) as a white solid. 1H NMR (500 MHz, MeOD): 58.30 (s, 1H), 8.23 (s, 1H), 7.85-7.79 (m, 4H), 6.17 (d, J = 2.5 Hz, 1H), 5.48 (dd, J = 2.5, 6.0 Hz, 1H), 5.03 (dd, J = 3.0, 6.5 Hz, 1H), 4.36 (t , J = 3.5 Hz, 1H), 3.67-3.65 (m, 2H), 2.94-2.89 (m, 2H), 2.62-2.60 (m, 2H), 1.82-1.79 (m, 2H), 1.60 (s, 9H), 1.39 (s, 3H) ppm; ESI-MS (m/z): 494.2 [M+l]+.

The synthetic route of 883-44-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; EPIZYME, INC.; CHESWORTH, Richard; KUNTZ, Kevin, Wayne; OLHAVA, Edward, James; PATANE, Michael, A.; WO2012/82436; (2012); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 883-44-3, name is 2-(3-Hydroxypropyl)isoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 2-(3-Hydroxypropyl)isoindoline-1,3-dione

(i) Preparation of trans and cis 2-(3,4,5-trimethoxyphenyl)-5-(3-phthalimidyl propoxy) tetrahydrofuran (compounds 107, 108) Compound 105 (1.14 g, 4.49 mmol) was dissolved in 4 mL dichloromethane. Triethylamine (681.4 mg, 6.73 mmol) was added to this solution. The reaction mixture was cooled with an ice bath and trifluoroacetic anhydride (1.41 g, 6.73 mmol) was added in a dropwise manner. The reaction mixture was stirred at 0 C. for 30 minutes and then 3-phthalimidylpropanol (106) (2.4 g, 13.26 mmol) was added. The reaction mixture was warmed to room temperature and stirred at room temperature for 2 hours. The reaction was quenched with saturated aqueous NaHCO3 solution and extracted with ethyl acetate. The organic layer was washed with water and saturated NaCl solution, dried over MgSO4, filtered and evaporated in vacuo to an oil which was purified by column chromatography (silica, 2:1 hexane/ethyl acetate) (107: 522 mg (trans); 108: 271 mg (cis); 1:1 mixture of 107 and 108: 110 mg; total yield 46%). 1 H NMR (CDCl3): 107: 1.70 (m,1H); 1.82 (m,1H); 2.00(m,2H); 2.02(m,1H); 2.28(m,1H); 3.46(m,1H); 3.83(s,3H); 3.84(m,3H); 3.88(s,6H); 4.99(t,1H); 5.30(dd,1H); 6.56(s,2H); 7.72(m,2H); 7.85(m,2H). 108: 1.95(m,3H); 2.00(m,2H); 2.20(m,1H); 3.51(m,1H); 3.83(s,3H); 3.85(m,2H); 3.88(s,6H); 3.92(m,1H); 4.90(m,1H); 5.16(dd,1H); 6.60(s,2H); 7.72(m,2H); 7.84(m,2H).

The synthetic route of 2-(3-Hydroxypropyl)isoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Cytomed, Inc.; US5681966; (1997); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 883-44-3, name is 2-(3-Hydroxypropyl)isoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 883-44-3, Computed Properties of C11H11NO3

Step 2. Preparation of 3-(l,3-dioxoisoindolin-2-yl)propanal A mixture of 2-(3-hydroxypropyl)isoindoline-l,3-dione (2.0 g, 8.76 mmol) and IBX (8.2 g, 29.27 mmol) in 60 mL EA was refluxed for 2 h. The mixture was filtered and filtrate was concentrated to afford 3-(l,3-dioxoisoindolin-2-yl)propanal (2.0 g , yield: 100%) as white solid. NMR (500 MHz, CDC13): delta 9.82 (s, 2H), 7.84-7.86 (m, 2H), 7.72-7.74 (m, 2H), 4.04 (t, J = 7.0 Hz, 2H), 2.87-2.89 (m, 2H) ppm. MS (ESI): m/z 553.7 [M+l]+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(3-Hydroxypropyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; EPIZYME, INC.; CHESWORTH, Richard; KUNTZ, Kevin, Wayne; OLHAVA, Edward, James; PATANE, Michael, A.; WO2012/82436; (2012); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 883-44-3,Some common heterocyclic compound, 883-44-3, name is 2-(3-Hydroxypropyl)isoindoline-1,3-dione, molecular formula is C11H11NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 4-[(4-fluorophenyl)sulfonyl]tetrahydro-2H-pyran-4-carboxylic acid, 1,I-di-methylethyl ester (6.7 g, 19 mmol, as prepared in Example 1, Part C) in anhydrous N,N-dimethylformamide (40 ml) at ambient temperature was added N-(3-hydroxypropyl)phthalimide (4 g, 19 mmol), followed immediately by NaH (700 mg, 20 mmol, 60% dispersion in mineral oil). After 1.5 hr, HPLC showed less than 1% of the starting Electrophile. The reaction mixture was quenched with water (60 ml). The cloudy mixture was extracted with ethyl acetate (2×100 ml). The organic layers were combined, washed with brine (1×200 ml), dried over sodium sulfate, filtered, and concentrated in vacuo to give a tan, viscous oil that crystallized from methanol (3.2 g, 52%). ESMS m/z=489 [M+H]+. This material was used without further purification.

The synthetic route of 883-44-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Freskos, John N.; Fobian, Yvette M.; Barta, Thomas E.; Becker, Daniel P.; Bedell, Louis J.; Boehm, Terri L.; Carroll, Jeffery N.; DeCrescenzo, Gary A.; Hockerman, Susan L.; Kassab, Darren J.; Kolodziej, Steve A.; McDonald, Joseph; Mischke, Deborah A.; Norton, Monica B.; Rico, Joseph G.; Talley, John J.; Villamil, Clara I.; Wang, Lijuan Jane; US2004/10019; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 883-44-3,Some common heterocyclic compound, 883-44-3, name is 2-(3-Hydroxypropyl)isoindoline-1,3-dione, molecular formula is C11H11NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Dissolve 2- (3-HYDROXYPROPYL) ISOINDOLE-1, 3-dione (2 g, 9.74 mmol, leq) in 40 mL of dichloromethane under N2. Add sulfuric acid (780 U. L) and cool reaction mixture to – 5C. Condense isobutylene gas to a liquid using a-78C cold finger charged with dry ice and acetone. Add approximately 20 mL of the condensed liquid to the reaction mixture and slowly warm the solution to room temperature overnight while stirring. Add saturated, aqueous sodium hydrogencarbonate to the reaction mixture and extract product into the organics. Wash separated organic layer with water and dry over magnesium sulfate to give 1.969 g (77% yield) of 2- (3-TERT-BUTOXYPROPYL) ISOINDOLE-1, 3-dione as a colorless oil.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(3-Hydroxypropyl)isoindoline-1,3-dione, its application will become more common.

Reference:
Patent; ELI LILLY AND COMPANY; WO2005/9941; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 883-44-3, name is 2-(3-Hydroxypropyl)isoindoline-1,3-dione, molecular formula is C11H11NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 883-44-3

The reaction was carried out with oven dried glassware. DMSO (85 mul, 1.1 mmol) was added to oxalyl chloride solution (0.35 mL 2 M DCM solution with 5 mL dry DCM) at -78 C. The reaction mixture was stirred at -78 C. for 10 min. 2-(3-Hydroxy-propyl)-isoindole-1,3-dione solution (102 mg, 0.5 mmol, in 2 mL DCM) was added drop wise in 2 min. Then triethylamine (0.35 mL, 2.5 mmol) was added drop wise in 2 min. The mixture was stirred for additional 30 minutes at -78 C. and was warmed up to room temperature. The reaction mixture was extracted with ethyl acetate. The organic layer was washed with saturated sodium bicarbonate, dried over MgSO4, filtered, and the filtrated was concentrated in vacuo. The crude product was purified by flash chromatography to give 3-(1,3-dioxo-1,3-dihydro-isoindol-2-yl)-propionaldehyde.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 883-44-3, its application will become more common.

Application of 883-44-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 883-44-3, name is 2-(3-Hydroxypropyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

A 50 ml round bottom flask was charged with aq. NaHCO3(0.05 M, 10 ml), aq. K2CO3(0.5 M, 10 ml) and CHCl3(5 ml). Alcohol 5 (16.02 g, 78.1 mmol) was dissolved in CHCl3(50 ml) and transferred to the reaction mixture followed by tetra-nbutylammonium chloride (4.34 g, 15.6 mmol), N-chlorosuccinimide (20.9 g, 156.1 mmol) and TEMPO (2.44 g, 15.6 mmol) and the reaction mixture was stirred vigorously at rt for 4.5 h. The phases were separated and the organic phase was washed with sulfate buffer (100 ml), NaHCO3(100 ml), and brine (100 ml), dried (Na2SO4), filtered and concentrated in vacuo. Purification by flash column chromatography (35% EtOAc in n-heptane, v/v) gave aldehyde 9 (6.54 g, 38%) as a white amorphous solid.

The synthetic route of 2-(3-Hydroxypropyl)isoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.