Category: 7477-63-6

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7477-63-6, name is 7-Chloroisatin, A new synthetic method of this compound is introduced below., Computed Properties of C8H4ClNO2

General procedure: The mixture of isatin (1 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one (1 mmol), 1,2-diarylethan-1-one, 2,3-dihydroinden-1-one (1 mmol) or 3,4-dihydronaphthalen-1(2H)-one (1 mmol), H2O (6 mL), HOAc (2 mL) was put in a reaction flask under 90 °C about 5-7 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be isolated out at same time. Then, compound 4 was recrystallized from DMF, however, the pure products of 6 and 8 were filtered from water, dried, without further recrystallization.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Wang, Zhansheng; Gao, Lingli; Xu, Zhongyun; Ling, Zhi; Qin, Yaqi; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 73; 4; (2017); p. 385 – 394;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7477-63-6, name is 7-Chloroisatin, A new synthetic method of this compound is introduced below., Application In Synthesis of 7-Chloroisatin

The specific steps are:Add 7-chloroindole (54.5 mg, 0.3 mmol) to the pressure tube.Benzamidine hydrochloride (140.9 mg, 0.9 mmol),CuI (5.7 mg, 0.03 mmol)And potassium phosphate (381.6 mg, 1.8 mmol).Add 3mL of DMSO,After magnetic stirring at room temperature for 5 hours,The reaction solution was extracted with dichloromethane.The organic layer was washed with saturated brine.After drying anhydrous sodium sulfate,The solvent is distilled off under reduced pressure to obtain a crude product.The crude product is purified by column chromatography with dichloromethane/petroleum ether=1:20 (V/V) as the eluent to obtain the desired product. The product is a yellow solid.The yield was 68percent.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Wuhan Institute of Technology; Jia Fengcheng; Chen Yunfeng; (8 pag.)CN108558782; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7477-63-6, name is 7-Chloroisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C8H4ClNO2

General procedure: The mixture of isatin (1 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one (1 mmol), 1,2-diarylethan-1-one, 2,3-dihydroinden-1-one (1 mmol) or 3,4-dihydronaphthalen-1(2H)-one (1 mmol), H2O (6 mL), HOAc (2 mL) was put in a reaction flask under 90 °C about 5-7 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be isolated out at same time. Then, compound 4 was recrystallized from DMF, however, the pure products of 6 and 8 were filtered from water, dried, without further recrystallization.

The synthetic route of 7477-63-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Wang, Zhansheng; Gao, Lingli; Xu, Zhongyun; Ling, Zhi; Qin, Yaqi; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 73; 4; (2017); p. 385 – 394;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7477-63-6, name is 7-Chloroisatin, A new synthetic method of this compound is introduced below., Product Details of 7477-63-6

General procedure: A mixture of isatins 1a-f (1 mmol), active cyanomethanes 2a-b (1 mmol), and enolizable ketones 3a-d (1 mmol) in ethanol (3 ml)was stirred at room temperature in the presence of HIL (Scheme 2).The reaction progress was monitored by thin-layer chromatography (TLC). After completion of the reaction, the reaction mixture was treated with ethanol to recover the insoluble catalyst by filtration.The filtrate was then concentrated under vacuum and the desired product was obtained. The structures of the products were confirmed by 1H NMR, IR spectroscopy, and supported by elemental analysis. The filtered catalyst was dried under vacuum for 2 h and was reused with a fresh charge of solvent and reactants for subsequent runs under the same reaction conditions to observe its catalytic efficiency.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Satasia, Shailesh P.; Kalaria, Piyush N.; Avalani, Jemin R.; Raval, Dipak K.; Tetrahedron; vol. 70; 35; (2014); p. 5763 – 5767;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7477-63-6 as follows. Product Details of 7477-63-6

General procedure: To a stirred mixture of isatins (1mmol) and malononitrile/ethyl cyanoacetate (1mmol) in methanol (3ml), was added piperidine (10molpercent) and the reaction mixture was stirred at room temperature for 10min. Then 5,7-dihydroxy-4-methyl-2H-chromen-2-one (1mmol) was added to it. The resulting mixture was stirred at reflux until the reaction was completed as indicated by TLC. The resulting precipitate was treated with dilute HCl and washed with water to afford the pure product for analysis.

According to the analysis of related databases, 7477-63-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Pal, Suman; Khan, Md. Nasim; Karamthulla, Shaik; Choudhury, Lokman H.; Tetrahedron Letters; vol. 56; 2; (2015); p. 359 – 364;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7477-63-6, name is 7-Chloroisatin, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C8H4ClNO2

General procedure: To a well-stirred solution of isatin and malononitrile(1 mmol each) in ethanol (95percent, 4 mL) was added dimedone,4-hydroxycoumarin, 4-hydroxy-N-methylquinolin-2-one,or 2-methyl-pyrazol-2-one [generated in situ from ethylacetoacetate and hydrazine hydrate, 1 mmol each]. To thissolution was added THAM (30 mol percent) and stirring wascontinued at ambient temperature. Upon completion of thereaction (TLC), water (5 mL) was added and stirring wascontinued for 10 min more. Resultant solid product wasfiltered, washed repeatedly with water, and dried. The dried solid was washed thrice with hexaneechloroformmixture (1:1, v/v) and dried again. Resultant product didnot require any further purification.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 7477-63-6.

Reference:
Article; Khot, Supriya S.; Anbhule, Prashant V.; Desai, Uday V.; Wadgaonkar, Prakash P.; Comptes Rendus Chimie; vol. 21; 9; (2018); p. 814 – 821;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 7477-63-6, The chemical industry reduces the impact on the environment during synthesis 7477-63-6, name is 7-Chloroisatin, I believe this compound will play a more active role in future production and life.

General procedure: For compound 3, arenesulfenyl chloride (5 mmol) was added dropwise to a solution of isatin or isatin derivatives (5 mmol) and triethylamine (5 mmol) in N,N-dimethylformamide (DMF, 5 mL) at room temperature. Stirring was continued for an additional 30 min and then the mixture was poured into ice water (20 mL). The yellow precipitates were collected by filtration and recrystallized from ethanol to give pure 3a-3m.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 7-Chloroisatin, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Shang, Jian-Li; Guo, Hui; Li, Zai-Shun; Ren, Biao; Li, Zheng-Ming; Dai, Huan-Qin; Zhang, Li-Xin; Wang, Jian-Guo; Bioorganic and Medicinal Chemistry Letters; vol. 23; 3; (2013); p. 724 – 727;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 7477-63-6, name is 7-Chloroisatin, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C8H4ClNO2

General procedure: A mixture of isatins 1 (1 mmol), substituted 1H-pyrazol-5-amine 2 (1 mmol), 6-aminopyrimidine-2,4(1H,3H)-dione 3 or 6-amino-1,3-dimethylpyrimidine-2,4(1H,3H)-dione 5 (1 mmol), H2O(6 mL), and HOAc (2 mL) was placed in a 25-mL flask andstirred at 90 °C (monitored by thin layer chromatography (TLC)) for about 7 h. Afterreaction completion, the mixture was cooled to room temperature and the precipitateobtained by filtration. Compounds 4 or 6 were further purified by recrystallizationfrom DMF.

The synthetic route of 7-Chloroisatin has been constantly updated, and we look forward to future research findings.

Reference:
Article; Dai, Lei; Mao, Kaimin; Pan, Zhengbing; Rong, Liangce; Research on Chemical Intermediates; vol. 45; 2; (2019); p. 769 – 788;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 7477-63-6, name is 7-Chloroisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7477-63-6, category: indolines-derivatives

General procedure: For compound 3, arenesulfenyl chloride (5 mmol) was added dropwise to a solution of isatin or isatin derivatives (5 mmol) and triethylamine (5 mmol) in N,N-dimethylformamide (DMF, 5 mL) at room temperature. Stirring was continued for an additional 30 min and then the mixture was poured into ice water (20 mL). The yellow precipitates were collected by filtration and recrystallized from ethanol to give pure 3a-3m.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Shang, Jian-Li; Guo, Hui; Li, Zai-Shun; Ren, Biao; Li, Zheng-Ming; Dai, Huan-Qin; Zhang, Li-Xin; Wang, Jian-Guo; Bioorganic and Medicinal Chemistry Letters; vol. 23; 3; (2013); p. 724 – 727;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 7477-63-6, The chemical industry reduces the impact on the environment during synthesis 7477-63-6, name is 7-Chloroisatin, I believe this compound will play a more active role in future production and life.

General procedure: (Table 3, Entry 1): beta-Cyclodextrin (1.0 mmol) was dissolved in water (15 mL) by warming to 50-55 OC until a clear solution was formed. Then, isatin (1.0 mmol) dissolved in methanol (0.5 mL) was added followed by semicarbazide (1.0 mmol) and the mixture was stirred at 50-55 OC until the reaction was complete (as monitored by TLC). After completion of the reaction, mixture was cooled to room temperature and beta-cyclodextrin was filtered. The aqueous layer was extracted with ethyl acetate (3 x 10 ml). The combined organic layers were extracted with water, saturated brine solution and dried over anhydrous Na2SO4. The combined organic layers were evaporated under reduced pressure and the resulting crude product was purified by column chromatography by using ethyl acetate and hexane (4:6) as eluent. The aqueous layer was cooled to 5 OC to recover beta-CD (Table 1). The product was confirmed by IR, 1H 13C NMR, mass spectra.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 7-Chloroisatin, other downstream synthetic routes, hurry up and to see.