Category: 7477-63-6

Healthcare careers for chemists are once again largely based in laboratories, although increasingly there is opportunity to work at the point of care, helping with patient investigation., Reference of 7477-63-6

General procedure: Amixture of isatin (1.0 mmol), malononitrile or its derivative (1.0mmol) and Et3N (1.0 mmol) in 3.0 mL ethanol were stirred at roomtemperature for half an hour. Then a solution of hydrazine hydrate (1.1 mmol)and dialkyl acetylenedicarboxylate (1.1 mmol) in 2.0 mL ethanol was added toit. The whole solution was stirred at room temperature for stipulated time asindicated in Table 2. The progress of the reaction was monitored by TLC. Aftercompletion of the reaction, the resulting precipitates were collected by filtration and the crudeproduct was recrystallized from the mixture of methanol and acetonitrile (7:3). In some cases the crude product were purified by columnchromatography using silica gel (60-120 mesh) and 50percent ethyl acetate in hexaneas eluent.

Interested yet? This just the tip of the iceberg, You can reading other blog about 7477-63-6.

Reference:
Article; Pal, Suman; Khan, Md. Nasim; Karamthulla, Shaik; Abbas, Sk Jahir; Choudhury, Lokman H.; Tetrahedron Letters; vol. 54; 40; (2013); p. 5434 – 5440;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

With the volume and accessibility of scientific research increasing across the world, it has never been more important to continue building the reputation for quality and ethical publishing we’ve spent the past two centuries establishing., SDS of cas: 7477-63-6

General procedure: In a 25 mL round bottom flask, isatins 1 (1 mmol), 3-phenylisoxazol-5(4H)-one 2 (1 mmol) or 3-ethylisoxazol-5(4H)-one 7 (1 mmol), pyrazol-5-amine 3 (1 mmol) or 6-aminopyrimidine-2,4-(1H,3H)-dione 5 (1 mmol), and Amberlyst-15 (100 mg) were stirred in CH3OH (5.0 mL) at 80 C. When the reaction was completed (detected by TLC), the spherical catalyst was separated by a sieve at once under hot condition. Then, the reaction mixture was cooled to room temperature, and solid precipitation occurred. After filtration, the crude product was recrystallized from EtOH and DMF to give pure compound.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 7477-63-6.

Reference:
Article; Niu, Qingqing; Xi, Junhua; Li, Lei; Li, Li; Pan, Chengli; Lan, Meijun; Rong, Liangce; Tetrahedron Letters; vol. 60; 43; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Career opportunities within science and technology are seeing unprecedented growth across the world, and those who study chemistry or another natural science at university now have increasingly better career prospects. Recommanded Product: 7-Chloroisatin

General procedure: To a stirred mixture of isatins (1mmol) and malononitrile/ethyl cyanoacetate (1mmol) in methanol (3ml), was added piperidine (10molpercent) and the reaction mixture was stirred at room temperature for 10min. Then 5,7-dihydroxy-4-methyl-2H-chromen-2-one (1mmol) was added to it. The resulting mixture was stirred at reflux until the reaction was completed as indicated by TLC. The resulting precipitate was treated with dilute HCl and washed with water to afford the pure product for analysis.

Keep up to date with our latest articles, reviews, collections & more by following us. You can also keep informed by signing up to our E-Alerts.

Reference:
Article; Pal, Suman; Khan, Md. Nasim; Karamthulla, Shaik; Choudhury, Lokman H.; Tetrahedron Letters; vol. 56; 2; (2015); p. 359 – 364;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 7477-63-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7477-63-6, name is 7-Chloroisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In a 25 mL round bottom flask, isatins 1 (1 mmol), 3-phenylisoxazol-5(4H)-one 2 (1 mmol) or 3-ethylisoxazol-5(4H)-one 7 (1 mmol), pyrazol-5-amine 3 (1 mmol) or 6-aminopyrimidine-2,4-(1H,3H)-dione 5 (1 mmol), and Amberlyst-15 (100 mg) were stirred in CH3OH (5.0 mL) at 80 C. When the reaction was completed (detected by TLC), the spherical catalyst was separated by a sieve at once under hot condition. Then, the reaction mixture was cooled to room temperature, and solid precipitation occurred. After filtration, the crude product was recrystallized from EtOH and DMF to give pure compound.

The synthetic route of 7-Chloroisatin has been constantly updated, and we look forward to future research findings.

Reference:
Article; Niu, Qingqing; Xi, Junhua; Li, Lei; Li, Li; Pan, Chengli; Lan, Meijun; Rong, Liangce; Tetrahedron Letters; vol. 60; 43; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 7477-63-6, A common heterocyclic compound, 7477-63-6, name is 7-Chloroisatin, molecular formula is C8H4ClNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In a 100 mL round bottom flask, according to the feed ratio (7-chloroisatin: benzyl alcohol (1:1.5); 7-chloroisatin: malondialdehyde (1:1.2))Add 7-chloroisatin 80 mg (0.44 mmol), benzyl alcohol 71.3 mg (0.66 mmol) and malondialdehyde 38.2 mg (0.53 mmol), respectively.Add a catalytic amount (0.1 times equivalent of 7-chloroisatin) of 001×7 MB, ferrocene and palladium acetate, 50 mL of solvent benzene, heat to 90 ° C, and heat the reaction for 6 hours.The reaction was monitored by thin layer chromatography. After the reaction was completed, the heating was stopped, the condensing device was removed, the mixed system was concentrated under reduced pressure, and purified by column chromatography.The target compound (14) was obtained by drying to give 115.8 mg (yield: 81percent).

The synthetic route of 7477-63-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shaanxi University of Science and Technology; Liang Chengyuan; Tian Danni; Ding Shunjun; Wang Xuechuan; Dong Hao; Wang Qiang; (15 pag.)CN108395438; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7477-63-6, name is 7-Chloroisatin, This compound has unique chemical properties. The synthetic route is as follows., Safety of 7-Chloroisatin

General procedure: The mixture of isatin (1 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one (1 mmol), 1,2-diarylethan-1-one, 2,3-dihydroinden-1-one (1 mmol) or 3,4-dihydronaphthalen-1(2H)-one (1 mmol), H2O (6 mL), HOAc (2 mL) was put in a reaction flask under 90 °C about 5-7 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be isolated out at same time. Then, compound 4 was recrystallized from DMF, however, the pure products of 6 and 8 were filtered from water, dried, without further recrystallization.

According to the analysis of related databases, 7477-63-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Wang, Zhansheng; Gao, Lingli; Xu, Zhongyun; Ling, Zhi; Qin, Yaqi; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 73; 4; (2017); p. 385 – 394;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 7477-63-6, name is 7-Chloroisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7477-63-6, Computed Properties of C8H4ClNO2

General procedure: A magnetically stirred mixture of naphthalene-2-amine (1.0mmol), isatin (1.0 mmol), dialkyl acetylenedicarboxylate (1.2 mmol) andanhydrous antimony trichloride (0.10 mmol) in dry acetonitrile (3 mL) taken ina 10 mL round bottom flask fitted with a reflux condenser under argonatmosphere and was refluxed for 5 h. After completion of the reaction, thereaction mixture was allowed to cool, quenched with water (10 mL) and extractedwith DCM (3 x 20 mL). The combined organic extracts were dried over anhydrousNa2SO4, filtered and volatiles were removed in vacuo. Thecrude residue was purified by column chromatography over silica gel (100-200mesh), eluting with 25 percent ethyl acetate in petroleum ether to afford compound (4).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Karmakar, Rajiv; Kayal, Utpal; Bhattacharya, Biswajit; Maiti, Gourhari; Tetrahedron Letters; vol. 55; 7; (2014); p. 1370 – 1372;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 7477-63-6, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7477-63-6, name is 7-Chloroisatin, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: Isatins (1a?j, 3.0 g), hydrazine hydrate (80percent, 13 mL) and water (13 mL) were added to a flask equipped with a thermometer with vigorous stirring. The reaction mixture was kept at 140 °C in an oil bath for 6 h before being cooled to r.t., when hydrochloric acid (2.0 mol L?1) was added to bring the pH to pH 2. The reaction mixture was stirred at r.t. for 12 h. Compounds 2a?j were obtained by filtering under vacuum and recrystallisation from absolute ethanol.

The chemical industry reduces the impact on the environment during synthesis 7-Chloroisatin. I believe this compound will play a more active role in future production and life.

Reference:
Article; Zhang, Chao; Xu, Juan; Zhao, Xinyu; Kang, Congmin; Journal of Chemical Research; vol. 41; 9; (2017); p. 537 – 540;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7477-63-6, name is 7-Chloroisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C8H4ClNO2

General procedure: In a 25 mL round bottom flask, isatins 1 (1 mmol), 3-phenylisoxazol-5(4H)-one 2 (1 mmol) or 3-ethylisoxazol-5(4H)-one 7 (1 mmol), pyrazol-5-amine 3 (1 mmol) or 6-aminopyrimidine-2,4-(1H,3H)-dione 5 (1 mmol), and Amberlyst-15 (100 mg) were stirred in CH3OH (5.0 mL) at 80 C. When the reaction was completed (detected by TLC), the spherical catalyst was separated by a sieve at once under hot condition. Then, the reaction mixture was cooled to room temperature, and solid precipitation occurred. After filtration, the crude product was recrystallized from EtOH and DMF to give pure compound.

The synthetic route of 7477-63-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Niu, Qingqing; Xi, Junhua; Li, Lei; Li, Li; Pan, Chengli; Lan, Meijun; Rong, Liangce; Tetrahedron Letters; vol. 60; 43; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 7477-63-6, A common heterocyclic compound, 7477-63-6, name is 7-Chloroisatin, molecular formula is C8H4ClNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Amixture of isatin (1.0 mmol), malononitrile or its derivative (1.0mmol) and Et3N (1.0 mmol) in 3.0 mL ethanol were stirred at roomtemperature for half an hour. Then a solution of hydrazine hydrate (1.1 mmol)and dialkyl acetylenedicarboxylate (1.1 mmol) in 2.0 mL ethanol was added toit. The whole solution was stirred at room temperature for stipulated time asindicated in Table 2. The progress of the reaction was monitored by TLC. Aftercompletion of the reaction, the resulting precipitates were collected by filtration and the crudeproduct was recrystallized from the mixture of methanol and acetonitrile (7:3). In some cases the crude product were purified by columnchromatography using silica gel (60-120 mesh) and 50percent ethyl acetate in hexaneas eluent.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Pal, Suman; Khan, Md. Nasim; Karamthulla, Shaik; Abbas, Sk Jahir; Choudhury, Lokman H.; Tetrahedron Letters; vol. 54; 40; (2013); p. 5434 – 5440;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem