Category: 6326-79-0

Reference of 6326-79-0, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6326-79-0, name is 6-Bromoisatin, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: Step 1: To a 250 mL flask equipped with a silicone oil bubbler was added commercially available isatin (7.7 g, 50 mmol) and anhydrous DMF (80 mL). the mixture was cooled down to 0 oC. To this solution was added NaH (1.32 g, 55 mmol), followed by the addition of CH3I in 15 min. Upon completion of the reaction (monitored by TLC), the mixture was diluted with saturated NH4Cl solution and extracted with ethyl acetate. The organic layer was washed with water, dried over Na2SO4, filtered, and concentrated to yield the crude N-methylindoline-2, 3-dione, which was used directly in the next step. Step 2: The N-methylindoline-2, 3-dione (7.58 g, 47 mmol) was refluxed in NH2·NH2-H2O ( 35 %) for 1h. Then the mixture was cooled to rt. The crude product was extracted with ethyl acetate. The combined organic layer was then dried over Na2SO4, purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 10:1). 1-Methylindolin-2-one was obtained as a pink solid.

The chemical industry reduces the impact on the environment during synthesis 6-Bromoisatin. I believe this compound will play a more active role in future production and life.

Reference:
Article; Zhao, Jian-bo; Ren, Xinfeng; Zheng, Bu-quan; Ji, Jian; Qiu, Zi-bin; Li, Ya; Journal of Fluorine Chemistry; vol. 215; (2018); p. 44 – 51;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6326-79-0, name is 6-Bromoisatin, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 6326-79-0

To a suspension of 6-bromoisatin (Richman) (5.0 g, 22.1 mmol) in water (55 ml) was added [NAOH] (0.94 g, 23.5 mmol, 1.1 equiv) and the mixture was warmed to approximately [35 C] for 30 minutes to form a solution. The solution was cooled to [5 C] and a solution of sodium nitrite (1.70 g, 24.8 mmol, [1.] [1] equiv) was added dropwise over approximately 30 minutes, keeping the temperature below 10 C. The whole mixture was added dropwise via a cannula to a vigorously stirred solution of concentrated sulphuric acid (4.48 g, 45.7 mmol, 2.0 equiv) in water (55 ml) keeping the temperature below [10 C.] The mixture was stirred for 20 minutes and a solution of tin (II) chloride (10.2 g, 54.0 mmol, 2.4 equiv) in concentrated hydrochloric acid (21 ml) was added dropwise. The mixture was stirred at [5 C] for 2 hours and the resulting crude 5-methylindazole-3-carboxylic acid was isolated by filtration and washed several times with water. The yellow solid was then azeotroped with toluene (3 x 100 ml) to remove water prior to the next step to leave a yellow/green solid. LCMS MH+ 238/240 [(79BR/8LBR),] RT 2.69 min.

According to the analysis of related databases, 6326-79-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ASTEX TECHNOLOGY LIMITED; WO2004/14864; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 6326-79-0, A common heterocyclic compound, 6326-79-0, name is 6-Bromoisatin, molecular formula is C8H4BrNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The solution of 6-bromoisatin (10 g, 22 mmol) in IN aqueous NaOH solution (48 mNo.) was stirred at 50 0C for 1 h. The mixture was cooled to 0 0C Sodium nitrite (3 g, 22 mmol) solution in water (11 m-6) was added drop wise for 15 min at 0 0C The mixture was added to the solution of water (90 mNo.) and sulfuric acid (4.6 mNo.) at 0 0C for 15 min. The mixture was added to the solution of cone, hydrochloric acid (40 m-6) and SnCl2.2H 2O (24 g, 53 mmol). After 1 h, the mixture was filtered and washed with water. The solid was dried through air flow to give the titled compound (8.98 g).[185] [186] 1H NMR (300 MHz, DMSOd6) delta 13.76 (bs, IH), 7.87 (s, IH), 7.55 (d, J = 8 Hz, IH), 7.27 (d, J = 8 Hz, IH), 2.44 (s, 3H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; KOREA INSTITUTE OF SCIENCE AND TECHNOLOGY; KOREA RESEARCH INSTITUTE OF CHEMICAL TECHNOLOGY; KOREA RESEARCH INSTITUTE OF BIOSCIENCE AND BIOTECHNOLOGY; SIM, Tae Bo; SON, Jung Beom; KIM, Hwan; PARK, Dong Sik; CHOI, Hwan Geun; HAM, Young Jin; HAH, Jung Mi; YOO, Kyung Ho; OH, Chang Hyun; LEE, So Ha; HA, Jae Du; CHO, Sung Yun; KWON, Byoung-Mog; HAN, Dong Cho; WO2010/64875; (2010); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 6326-79-0, The chemical industry reduces the impact on the environment during synthesis 6326-79-0, name is 6-Bromoisatin, I believe this compound will play a more active role in future production and life.

General procedure: TiCl4 (0.7 mL, 6 mmol)was added to a stirred suspension of Zn powder (0.78 g, 12 mmol) in freshlydistilled anhydrous THF (15 mL) at room temperature (rt) under a dry N2atmosphere. After completion of the addition, the mixture was refluxed for 2 h.The suspension of the low-valent titanium reagent thus-formed was cooled tort. A solution of isatin or its derivatives 1 or 3 (2 mmol) in THF (10 mL) wasadded dropwise. The mixture was stirred at room temperature for about 5 minunder N2. After this period, the thin layer chromatography (TLC) analysis of themixture showed the reaction completed. The reaction mixture was quenchedwith 3% HCl (15 mL) and extracted with CHCl3 (3 50 mL). The combinedextracts were washed with water (3 50 mL) and dried over anhydrousNa2SO4. After evaporation of the solvent under reduced pressure, the crudeproduct was purified by column chromatography (petroleum ether/ethylacetate = 5:1) to give the pure products 2 or 4.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Bromoisatin, other downstream synthetic routes, hurry up and to see.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6326-79-0, name is 6-Bromoisatin, A new synthetic method of this compound is introduced below., Product Details of 6326-79-0

To a round bottom flask containing 6-bromoindoline-2,3-dione (1 g, 4.42 mrnol) was added NaOH (4.9 mL, 4.87 mmol) and stirred at 50 C for I h. The reaction mixture is then brought to ii and cooled to 0C before adding a solution of NaNO2 (0.31 g, 4.42 mmol) in 1-120 (1 1 mL) dropwise over a period of 15 mins, The above mixture was then added to a solution of H20 (9 mL) and H2S04 (46 mL) thai is precooled to 0 C dropwise over a period of 15 mins. The crude mixture was then added to a mix of cone. HCI (4 mL)and SnC1?.2H20 (2.5 g, 11.06 rnmoi) at ii and continued to stir at rt for I h. The solids are then filtered and dried to give the crude product 6-hromo-IH-indazoie-3-carhoxyiic acid (Intermediate I 12A) (1.1 g, 93%) as a tan solid. The crude product was taken to the next step without further purification.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

These common heterocyclic compound, 6326-79-0, name is 6-Bromoisatin, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 6-Bromoisatin

General procedure: The targeted compounds have been synthesized as previouslydescribed (38). This approach consists in the couplingof a correctly substituted isatin and the 3-acetoxyindole inalkaline methanol to afford the indirubin skeleton. Then, the3¢-position reacts with hydroxylamine in refluxing pyridine leading to the corresponding indirubin-3¢-oxime. To a solutionof the corresponding indirubin in pyridine, hydroxylaminehydrochloride was added. The mixture was warmed inreflux for 1.5 h. After completion and cooling to 70C, waterwas added. The resulting precipitate was filtered, washedwith water and cyclohexane, and dried to afford the correspondingoxime as a red solid with 100%.796 was synthesized after acetylation of the oxime as waspreviously described (38) and was obtained with 100% yield.For synthesis of 6BIO-Pip, the corresponding indirubin-3¢-oxime was dissolved in anhydrous dimethylformamide(DMF). Then, 1,2-dibromoethane and a catalytic amount oftriethylamine were added and the mixture was stirred at 50Cfor 24 h. After completion, water was added and the precipitatefiltered, washed with water, and dried. The ether wasdissolved in anhydrous DMF. The corresponding amine wasthen added and the resulting mixture was warmed at 80Cunder a radiation of 150W for 20 min. After completion,water is added and the resulting precipitate is filtered, washedwith water, and dried. The corresponding derivatives areobtained as purple solid.

The synthetic route of 6-Bromoisatin has been constantly updated, and we look forward to future research findings.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6326-79-0, name is 6-Bromoisatin, A new synthetic method of this compound is introduced below., category: indolines-derivatives

Step 1: Synthesis of Intermediate 1-5.1To RiO (25.0 g, 111 mmol) in acetonitrile (750 mL) is added Mel (15 mL, 241 mmol) and K2C03(60.0 g, 434 mmol) and the reaction mixture is stirred at 60 C for 2 h. The reaction mixture isfiltered and concentrated. Water and ethyl acetate are added to the residue. The organic layer isextracted twice with water, is dried over MgSO4 and concentrated. Yield 56%, m/z 240/242[M+H]+, rt 0.48 mi LC-MS Method X001 004.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Related Products of 6326-79-0,Some common heterocyclic compound, 6326-79-0, name is 6-Bromoisatin, molecular formula is C8H4BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 6-bromoindoline-2,3-dione (0.504 g,2.23 mmol)in acetonitrile (11 mL)was added K2C03 (1.23 g,8.92 mmol)then iodomethane (0.278 mL,4.46 mmol). The reactionmixture was heated at 60 oc for 1.5 h. After cooling to room temperature,water (30 mL)wasadded and the mixture was extracted with DCM (30 mL x 3). The combined organic layers were washed with brine (30 mL),dried over anhydrous Na2S04 and then concentrated in underreduced pressure to give the title compound (0.506 g,95%)that required no further purification.1HNMR(400MHz,CDCl3)87.46(dd,J=7.9,l.OHz,1H),7.32-7.28(m,1H),7.08(d,J=1.5 Hz,1H),3.25 (d,J = 0.6 Hz,3H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 6-Bromoisatin, its application will become more common.

Adding a certain compound to certain chemical reactions, such as: 6326-79-0, name is 6-Bromoisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6326-79-0, Quality Control of 6-Bromoisatin

6-Bromo-1H-indole-2,3-dione is treated with sodiumhydroxide (1.1 eq) in water at 30C till all solids are dissolved. Sodiumnitrite (1.1 eq) dissolved in a little amount of water is added slowly at this temperature and the solution is stirred for additional 30 minutes. The mixture is slowly added to a solution of sulfuric acid (1.9 eq) in water at 0C keeping the internal temperature below 10C. After additional 20 minutes at this temperature, a mixture of tin(ll)chloride (2.4 eq) in water and hydrochloric acid is added slowly. After 2h of stirring at 0C workup by filtration over celite, washing with acetone and removing the solvent in vacuum gives the intermediate carboxylic acid. 6-Bromo-1H-indazole-3-carboxylic acid is converted into the corresponding methylester following standard procedures.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Bromoisatin, other downstream synthetic routes, hurry up and to see.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6326-79-0, name is 6-Bromoisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Product Details of 6326-79-0

For example, Compound 3 (N-benzyl-6-bromoindoline-2,3-dione) was prepared according to Scheme 1a: 6-Bromoisatin (SM1) (984 mg, 4.35 mmol, 1.0 equiv) was dissolved in N,N-dimethylformamide (8.70 mL), and the orange solution was cooled to 0 C. Sodium hydride (183 mg, 4.57 mmol, 60% dispersion in mineral oil, 1.05 equiv) was added in two portions, and the resulting purple suspension was maintained at 0 C. for 15 min. Benzyl bromide (604 muL, 5.05 mmol, 1.16 mmol) was added dropwise, and the resultant orange solution was maintained at 0 C. for 30 min. Water (30 mL) was added, and the biphasic mixture was extracted with EtOAc (4¡Á50 mL). The combined organics were dried over Na2SO4 and concentrated. Purification of the residue by silica gel flash column chromatography (gradient 1:3 EtOAc-hexanes to 100% EtOAc) gave Compound 3 (1.31 g, 95%) as an orange solid: mp 190192 C.; Rf 0.69 (3:7 EtOAc-hexanes); 1H NMR (500 MHz, CDCl3): delta 7.47 (d, J=7.9 Hz, 1H), 7.417.36 (m, 2H), 7.367.31 (m, 3H), 7.287.24 (m, 1H), 6.96 (d, J=1.4, 1H), 4.91 (s, 2H); 13C NMR (125 MHz, CDCl3): delta 182.1 (C), 158.3 (C), 151.6 (C), 134.2 (C), 133.7 (C), 129.4 (CH), 128.6 (CH), 127.6 (CH), 127.3 (CH), 126.5 (CH), 116.5 (C), 114.7 (CH), 44.4 (CH2); IR (film): 1733, 1603 cm1; HRMS-ESI (m/z) [M+Na]+ calcd. for C15H10NO2BrNa, 337.9792; found, 337.9786.

The synthetic route of 6326-79-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Horne, David A.; Jove, Richard; Lincoln, Christopher; Nam, Sangkil; Overman, Larry; Xie, Jun; US2013/225637; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem