Category: 611-09-6

Related Products of 611-09-6,Some common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, molecular formula is C8H4N2O4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of isatin 1a (0.147 g, 1 mmol), malononitrile 2a (0.066 g, 1 mmol), and ethyl aceto-acetate 3a (0.13 mL, 1 mmol) was added to a vial containing a magnetic stirring bar and the ionic liquid ([BMIm]BF4, 5 drops). The reaction mixture was sealed and stirred at room temperature until disappearance of the starting materials (under 1 min). At this stage, the product due to poor solubility in the ionic liquid appears as a precipitate. In order to extract the ionic liquid, after completion of the reaction, the residue was washed with 2×10 mL of either water or diethyl ether. Washing the solid residue with ethanol (10 mL, 95.5%) has given remarkably pure powders of product 4a. The ionic liquid was recovered from the aqueous or ethereal extracts by evaporating under reduced pressure and reused in the next cycles.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Nitroindoline-2,3-dione, its application will become more common.

Reference:
Article; Rad-Moghadam, Kurosh; Youseftabar-Miri, Leila; Tetrahedron; vol. 67; 31; (2011); p. 5693 – 5699;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 611-09-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 611-09-6, name is 5-Nitroindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: GN/SO3H (80 mg) was added to the 3 mL of EtOH/water (1:1) and dispersed for 30 min. Then, malononitrile (1 mmol), isatin (1 mmol), and dimedone (1 mmol) were added to the mixture and the mixture was heated to reflux and kept at this temperature for an appropriate time. After the time of reaction was completed, water was separated by centrifuging followed by extracting the crude product by ethyl acetate. The solvent was dried using Na2SO4 and removed from the reaction by evaporation with a rotary evaporator. Finally, the crude product was recrystallized in hot ethanol to achieve the pure product. The GN/SO3H nanocomposite was washed and reused several times.

The synthetic route of 5-Nitroindoline-2,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri; Research on Chemical Intermediates; vol. 44; 11; (2018); p. 6979 – 6993;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, molecular formula is C8H4N2O4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 611-09-6

General procedure: A mixture of isatins 1a-f (1 mmol), active cyanomethanes 2a-b (1 mmol), and enolizable ketones 3a-d (1 mmol) in ethanol (3 ml)was stirred at room temperature in the presence of HIL (Scheme 2).The reaction progress was monitored by thin-layer chromatography (TLC). After completion of the reaction, the reaction mixture was treated with ethanol to recover the insoluble catalyst by filtration.The filtrate was then concentrated under vacuum and the desired product was obtained. The structures of the products were confirmed by 1H NMR, IR spectroscopy, and supported by elemental analysis. The filtered catalyst was dried under vacuum for 2 h and was reused with a fresh charge of solvent and reactants for subsequent runs under the same reaction conditions to observe its catalytic efficiency.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 611-09-6, its application will become more common.

Reference:
Article; Satasia, Shailesh P.; Kalaria, Piyush N.; Avalani, Jemin R.; Raval, Dipak K.; Tetrahedron; vol. 70; 35; (2014); p. 5763 – 5767;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 611-09-6, These common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 30 mg of SiO2_g-C3N4 nanocomposite was dispersed in aqueous media (3 ml) for 30 min and dimedone or 4-hydroxycoumarin (1 mmol), malononitrile (1 mmol) and isatin (1.0 mmol) were added to the mixture. Then, the mixture was stirred at reflux conditions for an appropriate time, while the reaction progress was monitored by thin layer chromatography (TLC). After the reaction was completed, ethyl acetate was employed for the extraction of crude product and the products were dried over anhydrous Na2SO4. The solvent was evaporated followed by recrystallizing of the crude product in hot ethanol, and pure products were identified by IR, 1H and 13C NMR spectral data. The SiO2_g-C3N4 nanocatalyst was washed with EtOH, dried and reused for the next run.

Statistics shows that 5-Nitroindoline-2,3-dione is playing an increasingly important role. we look forward to future research findings about 611-09-6.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri, Mohammad Ali; Research on Chemical Intermediates; vol. 44; 2; (2018); p. 1173 – 1188;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 611-09-6 as follows. name: 5-Nitroindoline-2,3-dione

General procedure: To a solution of L-proline-melamine complex (3 mol%) in DMSO (2 mL) was added dimedone 0.025 mg (0.178 mmol), malononitrile (1 equiv) and benzaldehyde / isatin (1 equiv) and stirred at room temperature for 1-20 min. After completion of the reaction (monitored by TLC), ethyl acetate was added stirring and continued for another 5 min. The precipitate formed was filtered. Evaporation of solvent gave the crude product which was recrystallized using ethanol to give the pure compound.

According to the analysis of related databases, 611-09-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Nagaraju, Sakkani; Paplal, Banoth; Sathish, Kota; Giri, Santanab; Kashinath, Dhurke; Tetrahedron Letters; vol. 58; 44; (2017); p. 4200 – 4204;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 611-09-6, name is 5-Nitroindoline-2,3-dione, A new synthetic method of this compound is introduced below., Computed Properties of C8H4N2O4

General procedure: A mixture of isatin (1 mmol), reactive methylene compound(1 mmol) and 1,3-dicarbonyl compound (1 mmol)in the presence of [Sipim]Cl (0.05 g) in water (5 mL)was refluxed with stirring in an oil bath. The progress ofthe reaction was monitored by TLC. After completion ofthe reaction, the mixture was filtered and remaining waswashed with warm ethanol (3 × 10 mL) in order to separate[Sipim]Cl catalyst. After cooling the ethanol phase, theprecipitates were filtered. The crude products were purifiedby recrystallization from ethanol (95 %).

The synthetic route of 611-09-6 has been constantly updated, and we look forward to future research findings.

Reference of 611-09-6, A common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, molecular formula is C8H4N2O4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of isatin derivatives (1a-1d, 1 mmol) oracenaphthoquinone (5, 1 mmol), methylene nitriles (2a,2b, 1 mmol), 1,3-dicarbonyl (3, 1 mmol), and 5 mg IG in3 cm3 H2O was stirred at 60 C for the mentioned timeshown in tables. Rapid conversion of reagents can beclearly confirmed by reaction color change. The progress ofthe reaction was monitored by TLC using EtOAc/n-hexane(1:3) as an eluent. Upon completion, the reaction mixturewas allowed to cool to room temperature and the precipitatewas obtained from the reaction mixture by filtration.The product 4a was dissolved in DMSO and the catalystwas separated by simple filtration. Pure products wereafforded by evaporation of the solvent under reduced pressure.

The synthetic route of 611-09-6 has been constantly updated, and we look forward to future research findings.

Reference of 611-09-6, A common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, molecular formula is C8H4N2O4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a well-stirred solution of isatin and malononitrile(1 mmol each) in ethanol (95%, 4 mL) was added dimedone,4-hydroxycoumarin, 4-hydroxy-N-methylquinolin-2-one,or 2-methyl-pyrazol-2-one [generated in situ from ethylacetoacetate and hydrazine hydrate, 1 mmol each]. To thissolution was added THAM (30 mol %) and stirring wascontinued at ambient temperature. Upon completion of thereaction (TLC), water (5 mL) was added and stirring wascontinued for 10 min more. Resultant solid product wasfiltered, washed repeatedly with water, and dried. The dried solid was washed thrice with hexaneechloroformmixture (1:1, v/v) and dried again. Resultant product didnot require any further purification.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Synthetic Route of 611-09-6,Some common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, molecular formula is C8H4N2O4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: An appropriate isatin (indole-2,3-dione) (I, 0.01 mol) was dissolved in alcohol (20 mL) and added hydrazine hydrate (99%, 0.015 mol) while shaking. The reaction mixture was stirred well, warmed on a water-bath for 10 min and left in the refrigeratorfor 3 hours. The resultant yellow crystalline solid was filtered, washed repeatedly with small portions of cold water and finally with a small quantity of cold alcohol. The product was dried and purified by recrystallization from chloroform. The compounds thus obtained were characterized by comparison with their physical constants reported in the literature.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Nitroindoline-2,3-dione, its application will become more common.

Adding a certain compound to certain chemical reactions, such as: 611-09-6, name is 5-Nitroindoline-2,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 611-09-6, category: indolines-derivatives

General procedure: GN/SO3H (80 mg) was added to the 3 mL of EtOH/water (1:1) and dispersed for 30 min. Then, malononitrile (1 mmol), isatin (1 mmol), and dimedone (1 mmol) were added to the mixture and the mixture was heated to reflux and kept at this temperature for an appropriate time. After the time of reaction was completed, water was separated by centrifuging followed by extracting the crude product by ethyl acetate. The solvent was dried using Na2SO4 and removed from the reaction by evaporation with a rotary evaporator. Finally, the crude product was recrystallized in hot ethanol to achieve the pure product. The GN/SO3H nanocomposite was washed and reused several times.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri; Research on Chemical Intermediates; vol. 44; 11; (2018); p. 6979 – 6993;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem