Category: 611-09-6

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 611-09-6 as follows. Quality Control of 5-Nitroindoline-2,3-dione

General procedure: A mixture of an isatin (1mmol), molononitrile (1mmol), CH activatedacid (1mmol), and [C4(DABCO)2]·2OH(2mol%) inwater (3mL)was stirred at 80 C. The reaction progress was monitored by TLC [eluent:n-hexane:EtOAc (9:2)] (It is important to that by beginning of thereaction the products were precipitated in the reaction medium).After completion of the reaction, the mixture was cooled to room temperature and the solid product was filtered, washed with cold distilledwater (2 mL) to obtain essentially pure products. The solid productswere recrystallized from ethanol if necessary.

According to the analysis of related databases, 611-09-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Goli-Jolodar, Omid; Shirini, Farhad; Seddighi, Mohadeseh; Journal of Molecular Liquids; vol. 224; (2016); p. 1092 – 1101;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 611-09-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 611-09-6, name is 5-Nitroindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a mixture containing isatin derivatives (1 mmol),malononitrile or ethyl cynocette (1mmol) and 1,3-cyclldiketone (1 mmol) in water (5 mL), H-Fe3O4(at)DA-SO3H(0.01g) were added and stirred under reflux condition. The progress of the reaction was monitored by TLC (n-hexane:EtOAc 7:3). After completion of the reaction the mixture was cooled and the catalyst was separated by means of an external magnet from mixture, then the crude product was collected and washed with distilled water and dried. They were weighted for reporting of the yields.

The synthetic route of 5-Nitroindoline-2,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Article; Mirhosseyni, Marzie Sadat; Nemati, Firouzeh; Elhampour, Ali; Combinatorial Chemistry and High Throughput Screening; vol. 21; 7; (2018); p. 487 – 494;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 611-09-6, name is 5-Nitroindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows., category: indolines-derivatives

General procedure: A mixture of isatin (1 mmol), malononitrile or cyanoacetic esters (1 mmol), 1,3-dicarbonyl compounds (1 mmol), and the catalyst (10 wt %) in ethanol (3 ml) was stirred at 80 C for a specified time (see Table 2). After complete conversion, as indicated by TLC, the reaction mixture was cooled to room temperature. The resulting solid precipitate was filtered and dried along with the catalyst. Further purification of the product was performed by recrystallization using ethanol and the catalyst was recovered by filtration.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 611-09-6.

Reference:
Article; Maheshwar Rao; Reddy, G. Niranjan; Reddy, T. Vijaikumar; Devi, B.L.A. Prabhavathi; Prasad; Yadav; Reddy, B.V. Subba; Tetrahedron Letters; vol. 54; 20; (2013); p. 2466 – 2471;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 611-09-6, name is 5-Nitroindoline-2,3-dione, A new synthetic method of this compound is introduced below., HPLC of Formula: C8H4N2O4

General procedure: A mixture of isatins or acenaphthoquinone (1 mmol), activated methylene reagents (1 mmol), 1,3-dicarbonyl compounds (1 mmol) and SBA-15-DABCO (0.085 g, 7 mol%) in water was stirred at 25 or 50 C. Upon compilation, monitored by TLC (n-hexane / ethyl acetate 2 / 1), the reaction mixture was allowed to cool to room temperature. The precipitate was filtered and dissolved in acetone. The catalyst was separated by filtration of this solution. The solution was concentrated under vaccum to afford the product, which was purified by recrystallization in the ethanol.

The synthetic route of 611-09-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Baharfar, Robabeh; Azimi, Razieh; Synthetic Communications; vol. 44; 1; (2014); p. 89 – 100;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 611-09-6, These common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Weigh5-nitroindole-dione 5.00g (26.02mmol) into a 250mL round bottom flask was added150mL of cyclohexane under stirring conditions, neopentyl glycol was slowlyadded 2.98g (28.63mmol), of methylbenzenesulfonate 0.896g (5.20mmol), thenheated at reflux at 100 6h.Starting material disappeared on TLC, cooled to room temperature, suctionfiltered, washed with a saturated aqueous sodium hydrogen carbonate builders,and dried under vacuum oven to give 5-nitro-3,3-shrink glutaraldehyde newindolinone 6.63g, yield 91.6%.

Statistics shows that 5-Nitroindoline-2,3-dione is playing an increasingly important role. we look forward to future research findings about 611-09-6.

Reference:
Patent; Tianjin University of Science&Technology; Yu, peng; Liu, fengxi; sun, HUA; Teng, yuou; Guo, qiannan; Han, kailin; Li, Huan Huan; Yang, yao; song, BINBIN; (19 pag.)CN103554008; (2016); B;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 611-09-6,Some common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, molecular formula is C8H4N2O4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: First, 0.01g of the CoFe2O4(at)SiO2(at)SO3H was dispersed for 30min and after that an amount of 1mmol from isatin, malononitrile and dimedone with ethanol/water (ratio 1:1) were mixed, and the final mixture was placed in 80C at the reflux condition. After completing the reaction by passing a certain time, the con -taining solution was separated by centrifuging and the crude product extracted and washed with ethyl acetate, and then Na 2 SO 4 was added to dehydrating the product. After that, the solvent was removed by using a rotary evaporator and finally the product recrystallized in hot ethanol to gain the pure product. Moreo -ver, the catalyst was washed and applied for several times to examine reusability. Structural assignments of the products are based on their 1 HNMR, 13 CNMR and IR spectra.

The synthetic route of 611-09-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zamani-Ranjbar-Garmroodi, Bardia; Nasseri, Mohammad A.; Allahresani, Ali; Hemmat, Kaveh; Research on Chemical Intermediates; vol. 45; 11; (2019); p. 5665 – 5680;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 611-09-6, name is 5-Nitroindoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 5-Nitroindoline-2,3-dione

General procedure: To a magnetically stirred mixture of isatins (1 mmol) and IL I (12.6 mg, 0.05 mmol) were added alkyl-malonates (1 mmol) or 1,3-dicarbonyl compounds (1 mmol) and then the reaction mixture was stirred at room temperature . After completion of the reaction (monitored by TLC), EtOAc was added to the reaction mixture, and [TBD][TFA] was removed by filtration and washed with EtOAc (2 5 ml).The filtrate was evaporated under reduced pressure to give the solid product as a residue in almost pure form. If necessary, the product could further be purified byrecrystallization from ethanol.

The synthetic route of 611-09-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Baghbanian, Seyed Meysam; Tajbakhsh, Mahmood; Farhang, Maryam; Comptes Rendus Chimie; vol. 17; 12; (2014); p. 1160 – 1164;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 611-09-6, The chemical industry reduces the impact on the environment during synthesis 611-09-6, name is 5-Nitroindoline-2,3-dione, I believe this compound will play a more active role in future production and life.

General procedure: Isatin 1 (3 mmol), 0.198 g malononitrile (3 mmol),0.420 g dimedone (3 mmol), and 0.025 g sodium acetate(0.3 mmol) were grinded with the pestle in mortar atambient temperature for 15 min. The resulting mixture wasair dried. Crude solid was then put on filter, rinsed withwater (2 9 2 cm3), and dried with water pump.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Nitroindoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Elinson, Michail N.; Ryzhkov, Fedor V.; Zaimovskaya, Tatiana A.; Egorov, Mikhail P.; Monatshefte fur Chemie; vol. 147; 4; (2016); p. 755 – 760;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 611-09-6, name is 5-Nitroindoline-2,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 611-09-6, Recommanded Product: 611-09-6

General procedure: The preparation was divided into two steps. Firstly, substituent indoline-2,3-dione (1 equiv) was dissolved in ethanol (10 mL), hydrazine hydrate (2 mL) was added. The reaction mixture was refluxed with magnetic stirring for 3 h and cooled to 0 C, then sodium hydroxide (3 equiv) was added, refluxed for 0.5 h and cooled to room temperature, then 150 mL water was added. The mixture was acidified by adding 2 N hydrochloric acid to pH 2, and extracted twice with dichloromethane. The organic filtrate was washed twice with brine, dried (Na2SO4), and then concentrated to give corresponding indolin-2-one by high-vacuum drying. Secondly, a mixture of the corresponding indolin-2-one (1 equiv) and furan-2-carbaldehyde (1 equiv) in ethanol was added two drops of piperidine and refluxed with magnetic stirring for 5 h. After the mixture cooled, the precipitate was filtered, washed with cold ethanol, dried, and recrystallized from methanol to afford the terminal product.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Nitroindoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Zhong, Ye; Xue, Mengzhu; Zhao, Xue; Yuan, Jun; Liu, Xiaofeng; Huang, Jin; Zhao, Zhenjiang; Li, Honglin; Xu, Yufang; Bioorganic and Medicinal Chemistry; vol. 21; 7; (2013); p. 1724 – 1734;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 611-09-6, name is 5-Nitroindoline-2,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 611-09-6, Application In Synthesis of 5-Nitroindoline-2,3-dione

Mg(ClO4)2 (0.1 g) was added to a mixture of isatin (2 mmol), and dimedone (4 mmol) in aqueousethanol solution (50%, v/v, 5 mL), and the resulting mixture was stirred at 80C for 10-12 h. Upon completion of the reaction (TLC, Ethyl acetate/Petroleum ether = 1:4), the mixture was allowedto cool to room temperature. The resulting solid was filtered and washed successively with water(2 30 mL) and cold aqueous ethanol (2 1 mL) to afford a crude product, which was recrystallizedfrom EtOH to afford the pure product 3. Some insolubility could be observed in the refluxing ethanolduring the recrystallization process, which should be filtered when hot.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Chen, Chunfeng; Lv, Chunlei; Liang, Jianfeng; Jin, Jianqing; Wang, Lijun; Wu, Chunlei; Shen, Runpu; Molecules; vol. 22; 8; (2017);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem