Category: 611-09-6

These common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application of 611-09-6

General procedure: A mixture of isatin 1a (0.147 g, 1 mmol), malononitrile 2a (0.066 g, 1 mmol), and ethyl aceto-acetate 3a (0.13 mL, 1 mmol) was added to a vial containing a magnetic stirring bar and the ionic liquid ([BMIm]BF4, 5 drops). The reaction mixture was sealed and stirred at room temperature until disappearance of the starting materials (under 1 min). At this stage, the product due to poor solubility in the ionic liquid appears as a precipitate. In order to extract the ionic liquid, after completion of the reaction, the residue was washed with 2×10 mL of either water or diethyl ether. Washing the solid residue with ethanol (10 mL, 95.5%) has given remarkably pure powders of product 4a. The ionic liquid was recovered from the aqueous or ethereal extracts by evaporating under reduced pressure and reused in the next cycles.

Because a catalyst decreases the height of the energy barrier, its presence increases the reaction rates of both the forward and the reverse reactions by the same amount.Read on for other articles about 611-09-6.

Reference:
Article; Rad-Moghadam, Kurosh; Youseftabar-Miri, Leila; Tetrahedron; vol. 67; 31; (2011); p. 5693 – 5699;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 611-09-6, Chemistry built the modern world, from the materials that make up the everyday objects around us, the batteries in our devices and cleaning products that help to maintain sanitation.

General procedure: 30 mg of SiO2_g-C3N4 nanocomposite was dispersed in aqueous media (3 ml) for 30 min and dimedone or 4-hydroxycoumarin (1 mmol), malononitrile (1 mmol) and isatin (1.0 mmol) were added to the mixture. Then, the mixture was stirred at reflux conditions for an appropriate time, while the reaction progress was monitored by thin layer chromatography (TLC). After the reaction was completed, ethyl acetate was employed for the extraction of crude product and the products were dried over anhydrous Na2SO4. The solvent was evaporated followed by recrystallizing of the crude product in hot ethanol, and pure products were identified by IR, 1H and 13C NMR spectral data. The SiO2_g-C3N4 nanocatalyst was washed with EtOH, dried and reused for the next run.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms. In my other articles, you can also check out more blogs about 611-09-6.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri, Mohammad Ali; Research on Chemical Intermediates; vol. 44; 2; (2018); p. 1173 – 1188;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Academic researchers, R&D teams, teachers, students, policy makers and the media all rely on us to share knowledge that is reliable, accurate and cutting-edge. Electric Literature of 611-09-6

General procedure: A mixture of malononitrile (1 mmol), isatin (1 mmol), dicarbonyl (1 mmol), PEGOSO3H(0.1 mmol), and water (2 mL) was stirred under reflux for the appropriate time (shown in Tables 3, 4). After completion of the reaction, the reaction mixture was filtered and the residue was washed with ethanol. The crude solid product was recrystallized from EtOH to afforded the pure products in high purity and yield.Assignment of the structures of the products was based on their 1H NMR, 13C NMR,and IR spectra.

Hope you enjoy the show about 611-09-6.

Reference:
Article; Nasseri; Zakerinasab; Research on Chemical Intermediates; vol. 41; 8; (2015); p. 5261 – 5270;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Redox catalysis has been broadly utilized in electrochemical synthesis. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis., Reference of 611-09-6

General procedure: Isatin 1 (3 mmol), malononitrile (0.2 g, 3 mmol,), bicyclic CH-acid 2 (3 mmol) and sodium acetate (0.025 g, 0.3 mmol) in ‘solvent-free’ manner or with additive (‘on-solvent’ manner) were grinded with a pestle and mortar at ambient temperature for 15 minutes. After the reaction was finished, the mixture was air-dried. Then the crude solid was put on filter, rinsed with water (2 mL) and EtOH (2 mL), and then dried with a water pump to isolate the spiro-oxindole 3.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms. In my other articles, you can also check out more blogs about 611-09-6.

Reference:
Article; Elinson, Michail N.; Vereshchagin, Anatoly N.; Ryzhkov, Fedor V.; Anisina, Yuliya E.; Arkivoc; vol. 2018; 4; (2018);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 611-09-6, A common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, molecular formula is C8H4N2O4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of the isatin 1 or acenaphthenequinone 4 (1 mmol), indole 2 (2 mmol), p-TSA (10mol %), CH2Cl2 (10 mL) was added to 50 mL flask and stirred at room temperature until the thecompletion of the reaction (Scheme 1, 2). Then the solid was filtered and washed with CH2Cl2 (5mL) and ethanol (5 mL) in turns, affording the product in excellent yields, which wasrecrystallized from ethanol to produce pure crystalline products. The products were identified byelemental analysis, MS, 1H NMR, 13C NMR, and IR spectra.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Yu, Jiangxia; Shen, Tianhua; Lin, Yan; Zhou, Yongbing; Song, Qingbao; Synthetic Communications; vol. 44; 14; (2014); p. 2029 – 2036;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 611-09-6, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 611-09-6, name is 5-Nitroindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: A mixture of isatin (1 mmol), dicarbonyl compound 1 (1 mmol),dicarbonyl compound 2 (1 mmol) and SSLP (0.1 g, 4.8 mol%) wasadded to a 25 mL canonical flask contained water (5 mL) and was stirred at 80 C for appropriate time. After completion of the reac-tion as indicated by TLC, the reaction mixture was filtered and washed with acetone (25 mL, two times) to separate the catalyst.The obtained organic phase was evaporated and the residue was recrystallized from ethanol to obtain the pure products.

The chemical industry reduces the impact on the environment during synthesis 5-Nitroindoline-2,3-dione. I believe this compound will play a more active role in future production and life.

Reference:
Article; Khalafi-Nezhad, Ali; Shahidzadeh, Elham Shaikhi; Sarikhani, Samira; Panahi, Farhad; Journal of Molecular Catalysis A: Chemical; vol. 379; (2013); p. 1 – 8;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 611-09-6, name is 5-Nitroindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows., name: 5-Nitroindoline-2,3-dione

General procedure: A mixture of dimedone (0.140 g, 1 mmol), isatin (0.147 g, 1 mmol) and malononitrile (0.066 g, 1 mmol) was stirred in round bottom flask containing 5 mL of oxalic acid dihydrate:proline LTTM at room temperature for an appropriate time. After completion of the reaction, as indicated by TLC, 10 mL of water was added to the reaction mixture and the insoluble crude product was filtered off. The aqueous layer was evaporatedunder vacuumto recover the LTTM. The crude product was washed with distilled water(5 mL) and recrystallized from ethanol (10 mL).

According to the analysis of related databases, 611-09-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Chandam, Dattatray R.; Mulik, Abhijeet G.; Patil, Dayanand R.; Deshmukh, Madhukar B.; Research on Chemical Intermediates; vol. 42; 2; (2016); p. 1411 – 1423;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 611-09-6, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 611-09-6 name is 5-Nitroindoline-2,3-dione, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: A mixture of an isatin (1mmol), molononitrile (1mmol), CH activatedacid (1mmol), and [C4(DABCO)2]·2OH(2mol%) inwater (3mL)was stirred at 80 C. The reaction progress was monitored by TLC [eluent:n-hexane:EtOAc (9:2)] (It is important to that by beginning of thereaction the products were precipitated in the reaction medium).After completion of the reaction, the mixture was cooled to room temperature and the solid product was filtered, washed with cold distilledwater (2 mL) to obtain essentially pure products. The solid productswere recrystallized from ethanol if necessary.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Nitroindoline-2,3-dione, and friends who are interested can also refer to it.

Reference:
Article; Goli-Jolodar, Omid; Shirini, Farhad; Seddighi, Mohadeseh; Journal of Molecular Liquids; vol. 224; (2016); p. 1092 – 1101;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 611-09-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 611-09-6 as follows.

General procedure: A mixture of isatin derivatves (1 mmole), malononitrile (1 mmole),1,3-dicarbonyl compounds (1 mmole), and Fe3+-mont. (0.05 g) in CH3CN(5 mL) was heated using an Elmasonic S 40 H ultrasonic cleaning unit at 50 C under silent condition. The progress of the reaction was monitored by TLC (EtOAc/hexane 3:7). After completion of the reaction, the catalyst was removed by filtration. Water was added to the residue. The solid which was obtained was filtered off and dried to provide pure products of the spirooxindole derivatives (4a-j) (Table 3).

According to the analysis of related databases, 611-09-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Mamaghani, Manouchehr; Tabatabaeian, Khalil; Pourshiva, Mina; Nia, Roghayeh Hossein; Journal of Chemical Research; vol. 39; 6; (2015); p. 314 – 317;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 611-09-6, These common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To mixture of isatins (1 mmol), malononitrile (1 mmol), and dimedone or 4-hydroxycoumarin or barbituric acids (1 mmol) in ethanol (4 mL), 5mg of Fe3O4APTPOSS MNPs added as the catalyst, and the mixture was stirred for an appropriate time at room temperature (Table 2). The reaction was monitored by TLC. After completion of the reaction, precipitate was filtered and dried in a drying oven to furnish 2-aminopyrano-3-carbonitriles.

Statistics shows that 5-Nitroindoline-2,3-dione is playing an increasingly important role. we look forward to future research findings about 611-09-6.

Reference:
Article; Safaei-Ghomi, Javad; Nazemzadeh, Seyed Hadi; Shahbazi-Alavi, Hossein; Catalysis Communications; vol. 86; (2016); p. 14 – 18;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem