Category: 603-62-3

Some common heterocyclic compound, 603-62-3, name is 3-Nitrophthalimide, molecular formula is C8H4N2O4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 3-Nitrophthalimide

3-Nitrophthalimide (5 g) and hydroxylamine sulfate powder (11 g) were sequentially added to isopropanol (90 mL).Stir the reaction mixture.A solution of potassium hydroxide (6 g) in water (5 ml) was added in one portion.Get a red liquid.The temperature of the reaction solution was slowly raised to 40 C, the solution was stirred for 30 minutes, filtered,Recrystallization twice with water, dried at 80 to give 1.4g yellow needle crystal,After vacuum drying at 120 C, 1.12 g (24% yield) of yellow powder was obtained.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 603-62-3, its application will become more common.

Reference:
Patent; Shanghai Zaiqi Biological Co., Ltd.; Wang Zhiguo; Song Yanhong; Ma Xiujuan; Tian Beibei; Li Shijiang; Li Chao; Zhang Xin; Li Tao; (7 pag.)CN107474007; (2017); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 603-62-3, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 603-62-3 as follows.

4-Nitro-lH-isoindole-l, 3(2H)-dione (117.3 g; Formula IV) followed by 1,1- carbonyldiimidazole (138.1 g) were added to a slurry of 3-aminopiperidine-2,6-dione hydrochloride (100 g, Formula III; obtained in Example 1) in acetonitrile (800 mL) to obtain a reaction mixture. The reaction mixture was heated to reflux at 80C to 82C and then stirred for 2 hours. 1,1-Carbonyldiimidazole (19.8 g) was further added to the reaction mixture twice over an interval of one hour. The reaction mixture was cooled to 25 C to 30C and then stirred for 30 minutes. The product obtained was filtered and the wet solid obtained was dried at 50C to 55C under reduced pressure to obtain the title compound. (0076) Yield: 162 g (88%)

According to the analysis of related databases, 603-62-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SUN PHARMACEUTICAL INDUSTRIES LIMITED; BARMAN, Dhiren Chandra; RAM, Sita; RAJBANGSHI, Mantu; NATH, Asok; PRASAD, Mohan; (14 pag.)WO2018/154516; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 603-62-3, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 603-62-3 name is 3-Nitrophthalimide, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Step 1): An ice cooled solution of bromine (2.5 ml, 48.5 mmol) in 1N KOH aq.solution was added to the solution of 3-nitrophthalimide (9.66 g, 50 mmol) in 1N KOH aq.solution (150 ml) followed by 1N KOH at 0. The mixture was refluxed for 1.5 hours. After cooling, the mixture was neutralized with 2N HCl and stirred at 0 to precipitate 2-amino-6-nitrobenzoic acid, 6.23 g (68%): mp 190 C.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Nitrophthalimide, and friends who are interested can also refer to it.

Reference:
Patent; Grelan Pharmaceutical Co. Ltd.; Laboratoires Fournier S.C.A.; US5872115; (1999); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 603-62-3, name is 3-Nitrophthalimide, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C8H4N2O4

3-Nitrophthalimide (LOOGR) was taken into a hydrogenation vessel and dissolved using 500ML of dimethylformamide. Raney nickel catalyst (20gr, wet) was added to the solution and subjected to hydrogenation conditions initially at 20-30C UNDER 20-40psi. After the exothermic nature of the reaction was over, hydrogen pressure was increased to 40-60psi and the temperature to 40-50C. After the hydrogen uptake is over sample was drawn from the reaction mass and checked for the absence of 3-nitrophthalimide by TLC. The reaction mixture was filtered while hot and the catalyst removed by filtration. Solvent was removed from the filtrate under reduced pressure at 60-80C. Water (500ML) was added to the residue and the mixture stirred for 20-30MIN. The product was isolated by filtration and dried at 60-70C to get a yellow crystalline solid of 3-aminophthalimide (80gr, 95%). Melting point: 262-4C.

According to the analysis of related databases, 603-62-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; NATCO PHARMA LIMITED; VENKAIAH CHOWDARY, Nannapaneni; WO2004/43919; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 603-62-3, These common heterocyclic compound, 603-62-3, name is 3-Nitrophthalimide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of potassium hydroxide (16.1 g, 286 mmol) in water (500 mL), was added 3-nitrophthalimide (25.0 g, 130 mmol) in portion at 0 C. The suspension was stirred at 0 C for 3 hrs, and then heated to 30 C for 3 hrs. To the solution, was added HCl (100 mL, 6N). The resulting suspension was cooled to 0 C for 1 hr. The suspension was filtered and washed with cold water (2 x 10 mL) to give 3-nitro-phthalamic acid as a white solid (24.6 g, 90% yield): 1H MR (DMSO-d6) delta 7.69 (brs, 1H, HH), 7.74 (t, J = 8 Hz, 1H, Ar), 7.92 (dd, J = 1, 8 Hz, 1H, Ar), 8.13 (dd, J= 1, 8 Hz, 1H, Ar), 8.15 (brs, 1H, NHH), 13.59 (s, 1Eta, OH); 13C NMR (DMSO-d6) delta 125.33, 129.15, 130.25, 132.54, 136.72, 147.03, 165.90, 167.31.

The synthetic route of 603-62-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CELGENE CORPORATION; CATHERS, Brian, E.; CHAMBERLAIN, Philip; LOPEZ-GIRONA, Antonia; LU, Gang; (696 pag.)WO2017/117118; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 603-62-3, name is 3-Nitrophthalimide, A new synthetic method of this compound is introduced below., COA of Formula: C8H4N2O4

Step 1: To a solution of potassium hydroxide (16.1 g, 286 mmol) in water (500 mL), was added 3-nitrophthalimide (25.0 g, 130 mmol) in portion at 0 C. The suspension was stirred at 0 C. for 3 hrs, and then heated to 30 C. for 3 hrs. To the solution, was added HCl (100 mL, 6N). The resulting suspension was cooled to 0 C. for 1 hr. The suspension was filtered and washed with cold water (2*10 mL) to give 3-nitro-phthalamic acid as a white solid (24.6 g, 90% yield): 1H NMR (DMSO-d6) delta 7.69 (brs, 1H, NHH), 7.74 (t, J=8 Hz, 1H, Ar), 7.92 (dd, J=1, 8 Hz, 1H, Ar), 8.13 (dd, J=1, 8 Hz, 1H, Ar), 8.15 (brs, 1H, NHH), 13.59 (s, 1H, OH); 13C NMR (DMSO-d6) delta 125.33, 129.15, 130.25, 132.54, 136.72, 147.03, 165.90, 167.31.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Muller, George; Man, Hon-Wah; Cohen, Benjamin M.; Li, Ying; Xu, Jean; Leong, William W.; US2012/232100; (2012); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 603-62-3, name is 3-Nitrophthalimide, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 603-62-3, Recommanded Product: 3-Nitrophthalimide

Step 1) Synthesis of 2-carbamoyl-6-nitrobenzoic acid This moiety was synthesized using the following protocol. To a solution of potassium hydroxide (6.44 g, 114.4 mmol) in water (200 mL), was added 3-nitrophalimide (10; 10 g, 52 mmol) in portions at 0 C. The suspension was stirred at 0 C. for 3 hours, and then heated to 30 C. for 3 hours. To the solution, was added HCl (40 mL, 6N). The resulting suspension was cooled to 0 C. for 1 hour. The suspension was filtered and washed with cooled water (2*20 mL) to give 2-carbamoyl-6-nitrobenzoic acid (11; 8.5 g, 77%) as a white solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Nitrophthalimide, other downstream synthetic routes, hurry up and to see.

Adding a certain compound to certain chemical reactions, such as: 603-62-3, name is 3-Nitrophthalimide, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 603-62-3, Recommanded Product: 603-62-3

To a solution of 3-nitrophthalimide (1 g, 5.20 mmol) in dry DMF (35 ml), cooled in an ice bath, NaH (60% w/w dispersion in mineral oil, 0.250 g, 6.25 mmol) was added, followed after 15 minutes by t-butyl bromoacetate (0.845 ml, 5.73 mmol). After stirring for 1 hour at room temperature, the mixture was poured into water and the resulting precipitate was washed with water and with a little amount of Et2O; after drying, tert-butyl 2-(4-nitro-1,3-dioxoisoindolin-2-yl)acetate was obtained (1.44 g, 4.70 mmol, 90% yield, MS/ESI+ 328.9 [MNa]+).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 603-62-3, name is 3-Nitrophthalimide, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C8H4N2O4

Example 1 Preparation of 6-nitrophthalamic acid (2) Commercially available 4-nitro-isoindole-1,3-dione (1) (25 g, 0.13 mol) was stirred in water (300 mL) at 0 C. Over a few minutes, an aqueous solution of sodium hydroxide (30% w/w, 35 g, 0.26 mol) was added. The mixture was stirred for 1.5 h at 0-5 C. The cold solution was acidified with concentrated HCl (22 mL, 0.26 mol) and the product precipitated as a white solid. After allowing to stand overnight in a refrigerator, the mixture was filtered to afford the title compound (26.3 g, 96%) as a white solid: 1H NMR (300 MHz, DMSO) delta 8.2 (s, 1H), 8.15 (d, 1H), 7.93 (d, 1H), 7.88-7.65 (m, 2H); ESIMS m/z 211 ([M+H]+), m/z 209 ([M-H]-).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 603-62-3.

Reference:
Patent; DOW AGROSCIENCES LLC; US2011/301178; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 603-62-3,Some common heterocyclic compound, 603-62-3, name is 3-Nitrophthalimide, molecular formula is C8H4N2O4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of potassium hydroxide (16.1 g, 286 mmol) in water (500 mL), was added 3-nitrophthalimide (25.0 g, 130 mmol) in portion at 0 C. The suspension was stirred at 0 C for 3 hrs, and then heated to 30 C for 3 hrs. To the solution, was added HC1 (100 mL, 6N). The resulting suspension was cooled to 0 C for 1 hr. The suspension was filtered and washed with cold water (2 x 10 mL) to give 3-nitro-phthalamic acid as a white solid (24.6 g, 90% yield): 1H NMR (DMSO-d6) delta 7.69 (brs, 1H, NHH), 7.74 (t, J = 8 Hz, 1H, Ar), 7.92 (dd, J= 1, 8 Hz, 1H, Ar), 8.13 (dd, J= 1, 8 Hz, 1H, Ar), 8.15 (brs, 1H, NHH), 13.59 (s, 1Eta, OH); 13C NMR (DMSO-de) Patent; CELGENE CORPORATON; HAGNER, Patrick; GANDHI, Anita; CHOPRA, Rajesh; KLIPPEL, Anke; (202 pag.)WO2016/60702; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem