Category: 56341-37-8

Adding a certain compound to certain chemical reactions, such as: 56341-37-8, name is 6-Chlorooxindole, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 56341-37-8, SDS of cas: 56341-37-8

Step 1: Synthesis of 2.6-dichloro-1H-indole (2):1003131 To a stirred solution of 6-chloroindolin-2-one 1(500 mg, 2.99 mmol) in toluene (25 mL) under inert atmosphere were added N,N-dimethylaniline (362 mg, 2.99 mmol) and POC13 (918 g, 5.98 mmol) at RT; heated to 110 C and stirred for 1 h. The reaction was monitored by TLC; after completion of the reaction, the reaction mixture was quenched with 10% aq. NaHCO3 solution (30 mL) and extracted with EtOAc (2 x 30 mL). The combined organic extracts were dried over Na2SO4, filtered and concentrated under reduced pressure to obtain the crude. This was purified by silica gel column chromatography using 5% EtOAc/ Hexanes to afford compound 2 (350 mg, 63%) as an off-white solid. 1H NMR (400 MHz, CDC13): 5 8.09 (br s, 1H), 7.41 (d, J= 8.4 Hz, 1H), 7.28 (s, 1H), 7.09 (d, J= 8.4 Hz, 1H), 6.39 (s, 1H); MS (ES): m/z184 (M – Hj

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Chlorooxindole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; PHARMAKEA, INC.; HUTCHINSON, John, Edward; LONERGAN, David; WO2015/77503; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 56341-37-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 56341-37-8, name is 6-Chlorooxindole belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

6-Chloro-1,3-dihydro-2H-indol-2-one (1.31 g, 7.85 mmol) and the compound (2.01 g, 7.85 mmol) obtained in Step 2 above were dissolved in methanol (40 ml) at room temperature and N,N-diisopropylethylamine (0.21 ml, 1.25 mmol) was added. After heating to reflux for 24 hours, saturated sodium bicarbonate solution was added to the reaction mixture, followed by extraction with ethyl acetate. The organic layer was washed with brine and then dried over anhydrous sodium sulfate. The solvent was evaporated under reduced pressure and the residue was purified by silica gel column chromatography [n-hexane:ethyl acetate=4:1 (v/v)] to give 2.53 g (82%) of the title compound as an orange solid.MS (FAB) m/z: 405 (M+H)+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Chlorooxindole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Sugimoto, Yuuichi; Uoto, Kouichi; Wakabayashi, Takanori; Miyazaki, Masaki; Setoguchi, Masaki; Taniguchi, Toru; Yoshida, Keisuke; Yamaguchi, Akitake; Yoshida, Shoko; US2012/264738; (2012); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 56341-37-8, name is 6-Chlorooxindole, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 6-Chlorooxindole

General procedure: A reaction mixture of the proper substituted indolin-2-ones 6,aldehyde (1.2 eq.), and piperidine (0.1 eq.) in ethanol (1 mL/0.5 mmol oxindole) was refluxed for 3-5 h, under nitrogen atmosphere. After, the mixture was cooled and put on ice, where the product precipitated. The product was filtered in vacuum with cold ethanol [10,14-17]. Finally, the product was placed in the vacuum desiccators to give the expected compound. The indolin-2-ones 3e was generated through substituted isatin in the presence of hydrazine monohydrate and ethylene glycerol, under reflux [18].

According to the analysis of related databases, 56341-37-8, the application of this compound in the production field has become more and more popular.

Reference:
Article; Nunes, Rute C.; Ribeiro, Carlos J.A.; Monteiro, Angelo; Rodrigues, Cecilia M.P.; Amaral, Joana D.; Santos, Maria M.M.; European Journal of Medicinal Chemistry; vol. 139; (2017); p. 168 – 179;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 56341-37-8, name is 6-Chlorooxindole, A new synthetic method of this compound is introduced below., Quality Control of 6-Chlorooxindole

EXAMPLE 20a rac-5-[6-Chloro-2-oxo-2,3-dihydro-1H-indol-3-yl]-3,4-dihydro-2H-pyridine-carboxylic acid tert-butyl ester A suspension of 6-chlorooxindole (1.91 g, 11.4 mmol) (Cresent Chem), 1-BOC-3-piperidone (2.5 g, 12.5 mmol) (Martix Scientific), and pyrrolidine (0.1 g, 1.14 mmol) (Aldrich) in 2-propanol (30 mL) was heated at 90 C. for 2 days. The solvent was evaporated in vacuo and the residue was partitioned between ethyl acetate and water. The aqueous layer was extracted repeatedly with ethyl acetate. The organic layer was separated, combined, dried over Na2SO4 and concentrated. The residue was purified by chromatography (ethyl acetate-dichloromethane, 1:9, V/V) to give rac-5-[6-chloro-2-oxo-2,3-dihydro-1H-indol-3-yl]-3,4-dihydro-2H-pyridine-carboxylic acid tert-butyl ester as a brown solid. (Yield 2.6 g, 67%).

The synthetic route of 56341-37-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Luk, Kim-Chun; So, Sung-Sau; Zhang, Jing; Zhang, Zhuming; US2006/293319; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 56341-37-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 56341-37-8 name is 6-Chlorooxindole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Example 3Preparation of 6-chloro-5-(chloroacetyl) oxindole :Charged with 500 ml of ethylene dichloride and A1C13 (250gm) in a 3 litre there-neck flask under nitrogen atmosphere at 25 to 30C. Add 84.19 gm of chloroacetyl chloride slowly at RT controlling the exotherm and stirred for 30 minutes.Contents are further added with 100 gm of 6- chloro-oxindoie at 35-37C in an hour. Stirring is continued at 35-37C for 10-12 hrs.Cool gradually to 0 to 5C and pour into ice, and water under stirring over 30 minutes. Stir for 30 minutes, remove ethylene dichloride by distlation under vacuum, cool the mass and filter off the product wash with water till it is neutral. Purify the product using 1,4- dioxane if required.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 6-Chlorooxindole, and friends who are interested can also refer to it.

Reference:
Patent; ARCH PHARMALABS LIMITED; GHOGARE, Bhausaheb Nana; DESHPANDE, Uday K.; PAI, Ganesh Gurpur; MANDAL, Arun Kanti; CHARANJIT, Sehgal; NEHA, Dixit Akshaya; WO2012/20424; (2012); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 56341-37-8, name is 6-Chlorooxindole, A new synthetic method of this compound is introduced below., Safety of 6-Chlorooxindole

A mixture of 750 ml of dichloromethane, 150 g of 6-chlorooxindole, 161.6 g of chloroacetyl chloride and 477.2 g of aluminium chloride was refluxed for 9.5 hours. The reaction mass was quenched into a mixture of crushed ice and 135 ml of hydrochloric acid. The formed solid was filtered, and the wet compound was washed with water. The wet compound was dissolved in 3525 ml acetic acid by heating to 70 to 80 C., then carbon was added and the mixture was stirred briefly at the same temperature, and the carbon was removed by filtration and washed with 15 ml of acetic acid. The filtrate was allowed to cool to about 20 C. for solid formation. The solidd was filtered, washed three times with 600 ml of water, and then dried to yield 148.5 g of the title compound.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Venkataraman, Sundaram; Rao, Uppala Venkata Bhaskara; Muvva, Venkateswarlu; Chitta, Vijayawardhan; US2006/89502; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 56341-37-8, name is 6-Chlorooxindole, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 56341-37-8, COA of Formula: C8H6ClNO

A solution of 6-chloro-oxindole(184mg, 1.1mmol) in tetrahydrofuran(5ml) and triethylamine(0.3mL) were added to a solution of 3,5-bis(trifluoromethyl)phenylisocyanate(255mg, 1.0mmol) in tetrahydrofuran(5mL) under argon atmosphere, and the mixture was stirred at room temperature for 4 hours. The reaction mixture was poured into diluted hydrochloric acid and extracted with ethyl acetate. The ethyl acetate layer was washed successively with water and brine, and dried over anhydrous magnesium sulfate. The residue obtained by evaporation of the solvent under reduced pressure was purified by column chromatography on silica gel(n-hexane:ethyl acetate=4:1) to give the title compound(172.2mg, 40.7%) as a pink solid.1H-NMR(DMSO-d6):delta 3.97(2H, s), 7.29(1H, dd, J=8.1, 2.1Hz), 7.41(1H, d, J=8.1Hz), 7.88(1H, s), 8.04(1H, d, J=2.1Hz), 8.38(2H, s), 10.93(1H, s).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Institute of Medicinal Molecular Design, Inc.; EP1535609; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 56341-37-8,Some common heterocyclic compound, 56341-37-8, name is 6-Chlorooxindole, molecular formula is C8H6ClNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture 6-chloroindolin-2-one (100 mg, 0.60 mmol), 3-(3,3,4,4- tetramethylborolan-l-yl)pyridine (184 mg, 0.90 mmol), Pd2dba3 (5.4 mg, 0.0060 mmol) and powdered K3PO4 (252 mg, 1.2 mmol) in w-BuOH (2 mL) was degassed by evacuation and refilling with Ar. Dicyclohexyl(2′,4′,6′-triisopropylbiphenyl-2- yl)phosphine (11.4 mg, 0.024 mmol) was added under the atmosphere of Ar. The reaction mixture was sealed and heated with stirring under microwave irradiation at 100 0C for 99 min. Later the reaction was cooled to rt and treated with degassed H2O (0.25 mL). The mixture was reheated under microwave irradiation at 110 0C for 1 h. The crude reaction mixture was concentrated under reduced pressure and purified by flash chromatography on silica gel using MeOH (0 to 6 %) in DCM as the eluent to provide the title compound as a pale yellow solid (100 mg, 80 %). %). 1H NMR (400 MHz, CD3OD) delta ppm 8.77 (d, J=I.52 Hz, 1 H), 8.52 (dd, J=4.80, 1.52 Hz, 1 H), 8.05 – 8.10 (m, 1 H), 7.52 (dd, J=7.33, 4.80 Hz, 1 H), 7.39 (d, J= 7.6 Hz, 1 H), 7.30 (dd, J=7.71, 1.39 Hz, 1 H), 7.17 (s,l H), 3.59 (s, 2 H); MS ESI 211.0 (100) [M + H]+, calcd for [C13H10N2O + H]+ 211.2.

The synthetic route of 56341-37-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; UNIVERSITY HEALTH NETWORK; WO2009/79767; (2009); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 56341-37-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 56341-37-8, name is 6-Chlorooxindole belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To the mixture of 6-chloro-2-oxindole (11 g, 65.6 mmol) (Crescent) and 3-chloro-2-fluorobenzaldehyde (12 g, 75.7 mmol) (Aldrich) in methanol (140 mL) was added piperidine (5.59 g, 65.6 mmol) (Aldrich) dropwise. The mixture was then heated at 50 C. for 3 h. After cooled to 4 C., the mixture was filtered and resulting precipitate was collected, dried to give E/Z-6-chloro-3-(3-chloro-2-fluoro-benzylidene)-1,3-dihydro-indol-2-one as a yellow solid (Yield 18 g, 89%).

The synthetic route of 6-Chlorooxindole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bartkovitz, David Joseph; Chu, Xin-Jie; Ding, Qingjie; Graves, Bradford James; Jiang, Nan; Zhang, Jing; Zhang, Zhuming; US2011/130398; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 56341-37-8, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 56341-37-8, name is 6-Chlorooxindole, This compound has unique chemical properties. The synthetic route is as follows.

EXAMPLE 11 (FROM TABLE 3) 3-[5-(6-Chloro-2-oxo-1,2-dihydroindol-3-ylidenemethyl)-4-methyl-1H-pyrrol-3-yl]-propionic acid 4-(2-Carboxyethyl)-2-formyl-3-methylpyrrole (200 mg), 167.6 mg 6-chloro-2-oxindole, and 166 muL piperidine in 2 mL of ethanol were heated at 95 C. for 5 hours. The reaction mixture was cooled and concentrated. The residue was suspended in 6 N aqueous hydrochloric acid. The precipitate was filtered, washed with water to pH 6 and dried in a vacuum oven to give 246 mg (74%) of the title compound as a brown solid. 1H-NMR (360 MHz, DMSO-d6): delta 13.22 (s, br, 1H, NH-1′), 12.09 (s, br, 1H, COOH), 10.95 (s, br, 1H, NH-1), 7.78 (d, J=7.95 Hz, 1H, H-4), 7.66 (s, 1H, H-vinyl), 7.18 (d, J=2.64 Hz, 1H, H-2′), 7.01 (dd, J=1.90, 7.95 Hz, 1H, H-5), 6.86 (d, J=1.90 Hz, 1H, H-7), 2.65 (t, J=7.14 Hz, 2H, CH2CH2COOH), 2.45 (t, J=7.14 Hz, 2H, CH2CH2COOH), 2.26 (s, 3H, CH3).

The chemical industry reduces the impact on the environment during synthesis 6-Chlorooxindole. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Sugen, Inc.; US6878733; (2005); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem