Category: 550-44-7

Application of 550-44-7, A common heterocyclic compound, 550-44-7, name is 2-Methylisoindoline-1,3-dione, molecular formula is C9H7NO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a suspension of LiAlH4 (1.1403 g) in dry THF (24 ml) under argonatmosphere, a solution of MeOH (2 ml) in THF (24 ml) was added over 16 min at 0C,followed by cooling of the whole to -74C (in an acetone-dry ice bath). To thissuspension, N-methylphthalimide 13 (1.6177 g, 10.0 mmol) was added in portions at-74C, and the mixture was stirred at this temperature for 40 min. Then the mixture was stirred at 0C for 45 min. A saturated aqueous solution of sodium sulfate (8 ml) wasadded, and the resultant inorganic salt was filtered by suction, and the precipitate waswashed with acetone. The combined organic layer was dried over magnesium sulfate,and the organic solvent was evaporated at 30C to give the residue 14 (yellow solid,1.1544 g, 88% yield). This intermediate is rather unstable, and it was used with furtherpurification. 1H-NMR (CDCl3): delta = 7.500 (2H, m), 7.040 (2H, s), 6.904 (2H, m), 3.987(3H, s).

The synthetic route of 550-44-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Kozai, Daisuke; Kabasawa, Yoji; Ebert, Maximilian; Kiyonaka, Shigeki; Firman; Otani, Yuko; Numata, Tomohiro; Takahashi, Nobuaki; Mori, Yasuo; Ohwada, Tomohiko; Molecular Pharmacology; vol. 85; 1; (2014); p. 175 – 185;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

550-44-7, name is 2-Methylisoindoline-1,3-dione, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Product Details of 550-44-7

(1) Refer to Figure 2 to determine the microchannel reactor connection mode, remove the preheating zone module, the channel type is cylindrical straight channel and circular microchannel structure, the number of microchannel mixed reaction modules is determined according to the flow rate and residence time.The N-methylphthalimide-concentrated sulfuric acid solution was regarded as the raw material A, the concentrated nitric acid solution was regarded as the raw material B, and the two materials were injected into the reaction zone through the metering pump at a flow rate of 10 ml/min and 25 ml/min, respectively. In the mixed residence reaction, the molar ratio of concentrated nitric acid to substrate is 1.2:1, the mass ratio of substrate to concentrated sulfuric acid is 1:2, and the microchannel reactor of Fig. 2 is used to control the temperature of 60 C, residence time. 180s, the reaction solution was quantitatively collected, washed with ice water, washed with water, filtered, and dried to obtain N-methyl-4-nitrophthalimide nitrated product, HPLC content analysis (normalized) 97%, yield 96 %.

The synthetic route of 550-44-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zhejiang Wanfeng Chemical Co., Ltd.; Liu Tao; Yao Chenhua; Yu Xingying; Yu Xiaotian; (11 pag.)CN109305933; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 550-44-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 550-44-7, name is 2-Methylisoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of magnesium (1.0 M in THF, 22 mL, 23.8 mmmol) was added 4-bromo-1-butene (2.2mL, 22 mmol) under a nitrogen atmosphere. After stirring the mixture for 30 min, the resultingsolution was added to the solution of N-methylphthalimide (1.42 g, 6.38 mmol) in THF (34 mL) at-20 C and stirred for additional 1 hour at the same temperature. The reaction was quenched byaddition of saturated aqueous NH4Cl (20 mL), and the resulting solution was extracted with EtOAc(30 mL). The organic extracts were washed with brine (20 mL), dried over Na2SO4, filtered, andconcentrated in vacuo to give a crude material (1.61 g). To a solution of the crude material (1.61 g) in dichloromethane (68 mL) was added triethylsilane (4.3mL, 27 mmmol) and boron trifluoride diethyl ether complex (3.4 mL, 27 mmol) under a nitrogenatmosphere at -20 C. The mixture was allowed to warm to 0 C and stirred for 30 min. The reactionwas quenched by addition of saturated aqueous NaHCO3 (50 mL). The resulting solution wasextracted with EtOAc (60 mL). The organic extracts were washed with brine (50 mL), dried overNa2SO4, filtered, and concentrated in vacuo to give a crude material. This material was purified bycolumn chromatography (silica gel, hexane/EtOAc = 3/1 to 1/1) to give 3a (1.17 g, 5.81 mmol, 85%for 2 steps) as a pale yellow oil. Rf = 0.32 (silica gel, hexane/EtOAc = 1/1); 1H NMR (300 MHz, CDCl3) delta 7.83 (d, J = 6.6 Hz, 1H, ArH), 7.56-7.41 (m, 3H, ArH), 5.70 (ddt, J = 6.3, 10.5, 17.1 Hz, 1H, CH),4.97-4.90 (m, 2H, CH2), 4.53 (t, J = 4.2 Hz, 1H, CH), 3.11 (s, 3H, CH3), 2.13-2.00 (m, 2H, CH2), 1.80 (m, 1H,CH2), 1.60 (m, 2H, CH2); 13C NMR (75 MHz, CDCl3) delta 168.5 (C), 144.6 (C), 137.1 (CH), 132.7 (C),131.2 (CH), 128.0 (CH), 123.4 (CH), 121.9 (CH), 115.1 (CH2), 60.9 (CH), 29.7 (CH2), 27.2 (CH3),26.6 (CH2).

The synthetic route of 2-Methylisoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sengoku, Tetsuya; Nagai, Yuichiro; Inuzuka, Toshiyasu; Yoda, Hidemi; Synlett; vol. 30; 2; (2019); p. 199 – 202;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 550-44-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 550-44-7, name is 2-Methylisoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

(1) Refer to Figure 2 to determine the microchannel reactor connection mode, remove the preheating zone module, the channel type is cylindrical straight channel and circular microchannel structure, the number of microchannel mixed reaction modules is determined according to the flow rate and residence time.The N-methylphthalimide-concentrated sulfuric acid solution was regarded as the raw material A, the concentrated nitric acid solution was regarded as the raw material B, and the two materials were injected into the reaction zone through the metering pump at a flow rate of 10 ml/min and 25 ml/min, respectively. In the mixed residence reaction, the molar ratio of concentrated nitric acid to substrate is 1.2:1, the mass ratio of substrate to concentrated sulfuric acid is 1:2, and the microchannel reactor of Fig. 2 is used to control the temperature of 60 C, residence time. 180s, the reaction solution was quantitatively collected, washed with ice water, washed with water, filtered, and dried to obtain N-methyl-4-nitrophthalimide nitrated product, HPLC content analysis (normalized) 97%, yield 96 %.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Methylisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Zhejiang Wanfeng Chemical Co., Ltd.; Liu Tao; Yao Chenhua; Yu Xingying; Yu Xiaotian; (11 pag.)CN109305933; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 550-44-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 550-44-7, name is 2-Methylisoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of magnesium (1.0 M in THF, 22 mL, 23.8 mmmol) was added 4-bromo-1-butene (2.2mL, 22 mmol) under a nitrogen atmosphere. After stirring the mixture for 30 min, the resultingsolution was added to the solution of N-methylphthalimide (1.42 g, 6.38 mmol) in THF (34 mL) at-20 C and stirred for additional 1 hour at the same temperature. The reaction was quenched byaddition of saturated aqueous NH4Cl (20 mL), and the resulting solution was extracted with EtOAc(30 mL). The organic extracts were washed with brine (20 mL), dried over Na2SO4, filtered, andconcentrated in vacuo to give a crude material (1.61 g). To a solution of the crude material (1.61 g) in dichloromethane (68 mL) was added triethylsilane (4.3mL, 27 mmmol) and boron trifluoride diethyl ether complex (3.4 mL, 27 mmol) under a nitrogenatmosphere at -20 C. The mixture was allowed to warm to 0 C and stirred for 30 min. The reactionwas quenched by addition of saturated aqueous NaHCO3 (50 mL). The resulting solution wasextracted with EtOAc (60 mL). The organic extracts were washed with brine (50 mL), dried overNa2SO4, filtered, and concentrated in vacuo to give a crude material. This material was purified bycolumn chromatography (silica gel, hexane/EtOAc = 3/1 to 1/1) to give 3a (1.17 g, 5.81 mmol, 85%for 2 steps) as a pale yellow oil. Rf = 0.32 (silica gel, hexane/EtOAc = 1/1); 1H NMR (300 MHz, CDCl3) delta 7.83 (d, J = 6.6 Hz, 1H, ArH), 7.56-7.41 (m, 3H, ArH), 5.70 (ddt, J = 6.3, 10.5, 17.1 Hz, 1H, CH),4.97-4.90 (m, 2H, CH2), 4.53 (t, J = 4.2 Hz, 1H, CH), 3.11 (s, 3H, CH3), 2.13-2.00 (m, 2H, CH2), 1.80 (m, 1H,CH2), 1.60 (m, 2H, CH2); 13C NMR (75 MHz, CDCl3) delta 168.5 (C), 144.6 (C), 137.1 (CH), 132.7 (C),131.2 (CH), 128.0 (CH), 123.4 (CH), 121.9 (CH), 115.1 (CH2), 60.9 (CH), 29.7 (CH2), 27.2 (CH3),26.6 (CH2).

The synthetic route of 2-Methylisoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sengoku, Tetsuya; Nagai, Yuichiro; Inuzuka, Toshiyasu; Yoda, Hidemi; Synlett; vol. 30; 2; (2019); p. 199 – 202;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 550-44-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 550-44-7, name is 2-Methylisoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

(1) Refer to Figure 2 to determine the microchannel reactor connection mode, remove the preheating zone module, the channel type is cylindrical straight channel and circular microchannel structure, the number of microchannel mixed reaction modules is determined according to the flow rate and residence time.The N-methylphthalimide-concentrated sulfuric acid solution was regarded as the raw material A, the concentrated nitric acid solution was regarded as the raw material B, and the two materials were injected into the reaction zone through the metering pump at a flow rate of 10 ml/min and 25 ml/min, respectively. In the mixed residence reaction, the molar ratio of concentrated nitric acid to substrate is 1.2:1, the mass ratio of substrate to concentrated sulfuric acid is 1:2, and the microchannel reactor of Fig. 2 is used to control the temperature of 60 C, residence time. 180s, the reaction solution was quantitatively collected, washed with ice water, washed with water, filtered, and dried to obtain N-methyl-4-nitrophthalimide nitrated product, HPLC content analysis (normalized) 97%, yield 96 %.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Methylisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Zhejiang Wanfeng Chemical Co., Ltd.; Liu Tao; Yao Chenhua; Yu Xingying; Yu Xiaotian; (11 pag.)CN109305933; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 550-44-7, name is 2-Methylisoindoline-1,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Formula: C9H7NO2

3. Add N-methylphthalimide 19.3g (119.9mmol) and 40mL of 98% sulfuric acid in a 100mL round bottom flask, stir.After the solid was completely dissolved, 18.8 g (65.7 mmol) of dibromohydantoin was added, and the mixture was immediately sealed, and the reaction was further stirred at room temperature for 6 hours.The resulting clear reaction mixture was then poured into 200 mL of ice water.A large amount of white precipitate was precipitated immediately, suction filtered, and washed with deionized water until the filtrate was neutral.Vacuum drying to constant weight,28.2 g of 4-bromo-N-methylphthalimide as a white solid were obtained in a yield of 98.4%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 550-44-7.

Reference:
Patent; Shaanxi Normal University; Hanyin Hanyin Middle School; Lv Jiagen; Zhang Shenghai; Cui Hongbo; Gu Min; Zhang Yanling; Li Yintao; Wu Zhaoyi; Liao Ting; (11 pag.)CN108727277; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 550-44-7, These common heterocyclic compound, 550-44-7, name is 2-Methylisoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Prepared according to a literature procedure (Beilstein I Org. Chem., 2012, 8, 192-200). N-Methylphthalimide (5 g, 30.4 mmol) was dissolved in MeOH (85 mL) andTHF (175 mL), then cooled to 0C. Sodium borohydride (1.15 g, 30 mmol) was added portionwise over 10 minutes, then the reaction mixture was stirred at 0C for a further 30 minutes. The reaction mixture was quenched with water and extracted with EtOAc, then the organic layers were dried over sodium sulphate and concentrated under reduced pressure, to afford the title compound (3.64 g, 73%) as a white solid.

The synthetic route of 550-44-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; UCB BIOPHARMA SPRL; BROWN, Julien Alistair; CALMIANO, Mark Daniel; JONES, Elizabeth Pearl; KROEPLIEN, Boris; REUBERSON, James Thomas; SELBY, Matthew Duncan; SHAW, Michael Alan; ZHU, Zhaoning; WO2015/86512; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 550-44-7, name is 2-Methylisoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 2-Methylisoindoline-1,3-dione

Add a nitrating agent to N-methylphthalimide at -5 C, and react at 40 C for 4h, then extract with an extraction solvent dry,N-methyl-4-nitrophthalimide is formed.The extraction solvent is ethyl acetate and dichloromethane, and the weight ratio is 1: 0.6. The weight ratio of the extraction solvent and N-methylphthalimide is 1: 1.

The synthetic route of 2-Methylisoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shandong Juancheng Fangyuan Bearing Chemical Co., Ltd.; Li Zhi; Zhang Hongyuan; Zhang Heji; (13 pag.)CN110437131; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 550-44-7, name is 2-Methylisoindoline-1,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 2-Methylisoindoline-1,3-dione

A 4-N-methylphthalimide/water wet cake (50.0 grams (g) dry weight, containing 10-60% water), resulting from either a mixed acid (H2SC /HNO3) nitration of N- methylphthalimide or an all nitric acid nitration of N-methylphthalimide, was charged to a 1000 mL, single-necked (24/40 joint) round-bottomed flask, equipped with a magnetic stir bar, and means to heat the flask with an external temperature controlled oil bath. The flask was then charged with 367 g of toluene, and enough additional deionized water was added such that the total amount of water present in the flask was equal to 160 g. The amount of water used targeted 20 to 25 wt% of 4NPI with respect to the total weight of 4NPI and water. The reaction mixture was magnetically stirred with an oil bath set temperature of 90C. After the 4NPI had dissolved in the toluene the stirring was stopped, and the lower water phase was removed via pipette. This method of dissolution and separation of the 4NPI toluene phase from the aqueous phase constitutes a purification of the 4NPI as water soluble impurities were extracted from the 4NPI/toluene phase into the aqueous phase. This dissolution/separation method is termed herein the “4NPI Extraction.” The 4NPI toluene solution was then placed on a roto-evaporator, equipped with a hot oil bath to heat the flask, and plumbed to a cold trap connected to a vacuum pump. The flask was rotated in the hot oil bath (temperature controlled at 110C) and the solvent was removed under reduced pressure (<30 mm). Once the majority of toluene had been removed, the flask was allowed to rotate in the oil bath at 110C, 25 mm, for 60 minutes, to afford a dry solid free of toluene and water. The solid was transferred to a glove box inerted with dry nitrogen. The desired dried catalyst (HEGC1, TBAB, or C6B) was added to the dried 4NPI for the bisimide forming reaction. Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 550-44-7. Reference:
Patent; SABIC GLOBAL TECHNOLOGIES B.V.; GUGGENHEIM, Thomas Link; ODLE, Roy Ray; CHAULAGAIN, Mani Raj; (55 pag.)WO2017/117449; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem