Category: 4403-36-5

Healthcare careers for chemists are once again largely based in laboratories, although increasingly there is opportunity to work at the point of care, helping with patient investigation., category: indolines-derivatives

Bis(4-methoxybenzyl)amine (900 mg) was dissolved in dichloromethane (20 ml) and cooled to 0C. To this solution, triethylamine (1.02 ml) was added and compound 49 (1.05 g) was added in small portions, followed by stirring at room temperature for 3 hours. After addition of water, the reaction mixture was extracted with dichloromethane. The organic layer was washed with brine and dried over magnesium sulfate. After filtration and evaporation of the solvent under reduced pressure, the resulting residue was purified by silica gel column chromatography (developing solvent: ethyl acetate:n-hexane 1:1 to ethyl acetate) to give the desired compound (compound 50) (1.4 g, yield 81%). 1H-NMR (300MHz, CDCl3) delta: 3.24(2H, t, J=6.8Hz), 3.81(6H, s), 4.10-4.14(2H, m), 4.29(4H, s), 6.88(4H, d, J=8.7Hz), 7.23(4H, d, J=8.7Hz), 7.73(2H, dd, J=3.1, 5.3Hz), 7.87(2H, dd, J=3.1, 5.3Hz). Rf value (silica gel plate, developing solvent: ethyl acetate:n-hexane = 1:1): 0.24.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4403-36-5.

Reference:
Patent; CHUGAI SEIYAKU KABUSHIKI KAISHA; EP1634874; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4403-36-5, name is 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride

Bis(4-methoxybenzyl)amine (900 mg) was dissolved in dichloromethane (20 ml) and cooled to 0C. To this solution, triethylamine (1.02 ml) was added and compound 49 (1.05 g) was added in small portions, followed by stirring at room temperature for 3 hours. After addition of water, the reaction mixture was extracted with dichloromethane. The organic layer was washed with brine and dried over magnesium sulfate. After filtration and evaporation of the solvent under reduced pressure, the resulting residue was purified by silica gel column chromatography (developing solvent: ethyl acetate:n-hexane 1:1 to ethyl acetate) to give the desired compound (compound 50) (1.4 g, yield 81%). 1H-NMR (300MHz, CDCl3) delta: 3.24(2H, t, J=6.8Hz), 3.81(6H, s), 4.10-4.14(2H, m), 4.29(4H, s), 6.88(4H, d, J=8.7Hz), 7.23(4H, d, J=8.7Hz), 7.73(2H, dd, J=3.1, 5.3Hz), 7.87(2H, dd, J=3.1, 5.3Hz). Rf value (silica gel plate, developing solvent: ethyl acetate:n-hexane = 1:1): 0.24.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4403-36-5.

Reference:
Patent; CHUGAI SEIYAKU KABUSHIKI KAISHA; EP1634874; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 4403-36-5, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4403-36-5, name is 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride, This compound has unique chemical properties. The synthetic route is as follows.

(2R,5S)-2-(1,3-Dioxo-1,3-dihydro-isoindol-2-yl)-ethanesulfonic acid 5-chloro-2-{2-[4-(4-fluoro-benzyl)-2,5-dimethyl-piperazin-1-yl]-2-oxo-ethoxy}-benzylamide To a solution of (2R,5S)-5-chloro-2-{2-[4-(4-fluoro-benzyl)-2,5-dimethyl-piperazin-1-yl]-2-oxo-ethoxy}-benzyl amine (0.060 g, 0.143 mmol) in methylene chloride (3 mL) was added 2-(1,3-dioxo-1,3-dihydro-isoindol-2-yl)-ethanesulfonyl chloride (0.043 g, 0.150 mmol) and triethylamine (0.060 mL, 0.43 mmol) and the solution was stirred 1 hr at ambient temperature. The reaction was diluted with saturated aqueous sodium hydrogen carbonate and extracted with methylene chloride. The combined organics were dried over magnesium sulfate, filtered and concentrated in vacuo. Chromatography on silica gel gave the title compound (0.073 g, 77%).

The chemical industry reduces the impact on the environment during synthesis 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Blumberg, Laura C.; Brown, Matthew F.; Gladue, Ronald P.; McGlynn, Molly A.; Poss, Christopher S.; US2002/107255; (2002); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4403-36-5, name is 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 4403-36-5

To 3-exo-[(R)-1-((S)-2-methyl-propane-2-sulfinylamino)-2-(2,4,5-trifluoro-phenyl)-ethyl]-8- aza-bicyclo[3.2.1]octane (265 mg, 0.68 mmol) in dichloromethane/1M NaOH (1/1, 5 mL) is added 2-phthalimidoethane sulfonyl chloride (577 mg, 2.05 mmol) then the resulting mixture is stirred at 50C during 16h. It is extracted with dichloromethane, the organic phase is dried and evaporated to give a white solid. MS: 626 [M+H]+HPLC (Zorbax SB C18, 2min method (0-0.8min 10-95%ACN, 0.8-1.5min 95%ACN, 1.5- 1.6min 95-10%ACN, 1.6-2min 10%ACN): 1.25 min.

According to the analysis of related databases, 4403-36-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; NOVARTIS AG; NOVARTIS PHARMA GMBH; WO2007/115821; (2007); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 4403-36-5, The chemical industry reduces the impact on the environment during synthesis 4403-36-5, name is 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride, I believe this compound will play a more active role in future production and life.

To 3-exo-[(S)-1-((S)-2-methyl-propane-2-sulfinylamino)-2-(2,4,5-trifluoro-phenyl)-ethyl]-8-aza- bicyclo[3.2.1]octane (540 mg, 1.2 mmol) in dichloromethane/1 M NaOH (1/1, 5 mL) is added 2-phthalimidoethane sulfonyl chloride (1.101 g, 3.59 mmol) then the resulting mixture is stirred at 500C during 16h. It is extracted with dichloromethane, the organic phase is dried and evaporated to give a white solid. MS: 626 [M+H]+HPLC (Zorbax SB C18, 2min method (0-0.8min 10-95%ACN, 0.8-1.5min 95%ACN, 1.5- 1.6min 95-10%ACN, 1.6-2min 10%ACN): 1.44 min.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; NOVARTIS AG; NOVARTIS PHARMA GMBH; WO2007/115821; (2007); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4403-36-5, name is 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride, A new synthetic method of this compound is introduced below., Recommanded Product: 4403-36-5

To bis(4-methoxybenzyl)amine (Example 406.01, 3.37g, 13.10 mmol) and TEA (5.46 mL, 39.3 mmol) in DCM (109 mL) at 0 C was added 2-phthalimidoethanesulfonyl chloride (3.94 g, 14.41 mmol, commercially available from Matrix Scientific) slowly. The reaction was stirred at RT until complete by LCMS analysis. The reaction was diluted with a saturated solution of NaCl and extracted with DCM, dried over MgSO4, filtered and concentrated in vacuo. Purification of the residue by flash chromatography on a Versapak Spherical pre-packed silica gel column (Sigma-Aldrich, St. Louis, MO, eluent: 10-55% EtOAc/hexanes, gradient elution) provided Example 95.1 (4.04g, 62%) as a white solid after evaporation. The product was used directly in the next step without further purification.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; AMGEN INC.; CHEN, Ning; CHEN, Xiaoqi; CHEN, Yinhong; CHENG, Alan C.; CONNORS, Richard V.; DEIGNAN, Jeffrey; DRANSFIELD, Paul John; DU, Xiaohui; FU, Zice; HARVEY, James S.; HEATH, Julie Anne; HEUMANN, Lars V.; HORNE, Daniel B.; HOUZE, Jonathan; KALLER, Matthew R.; KAYSER, Frank; KHAKOO, Aarif Yusuf; KOPECKY, David J.; LAI, Su-Jen; MA, Zhihua; MEDINA, Julio C.; MIHALIC, Jeffrey T.; NISHIMURA, Nobuko; OLSON, Steven H.; PATTAROPONG, Vatee; SWAMINATH, Gayathri; WANG, Xiaodong; WANSKA, Malgorzata; YANG, Kevin; YEH, Wen-Chen; (700 pag.)WO2018/97945; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 4403-36-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4403-36-5, name is 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 31 1-[5-(2-Phthalimidoethanesulfonamido)indole-2-carbonyl]-4-[N-methyl-N-(3-(1-methylethylamino)-2-pyridinyl)amino]piperidine (I) To a solution of 1-[5-aminoindole-2-carbonyl]-4-[N-methyl-N-(3-(1-methylethylamino)-2-pyridinyl)amino]piperidine (PREPARATION 56, 606 mg) in dry methylene chloride (5 ml) under nitrogen is added pyridine (127 mul, 1.05 equivalents) and 2-phthalimidoethanesulfonyl chloride (400 mg). The mixture is stirred at 20-25 for 3 days and then diluted with methylene chloride (40 ml) and water (20 ml). The layers are separated and the organic phase is washed with saline (15 ml), dried over sodium sulfate, and concentrated under reduced pressure to give a residue which is then chromatographed on silica gel (230-400 mesh, 85g, 8 psi), eluding with a gradient of methanol/chloroform (1/99-2.5/97.5). The appropriate fractions (Rf =0.33, TLC, methanol/chloroform, 5/95) are pooled and concentrated to give the title compound, NMR (CDCl3) 10.33, 7.80, 7.76-7.63, 7.35, 7.22, 6.95, 6.85, 6.69, 4.65, 4.51, 4.13, 3.60-3.40, 3.40-2.90, 2.64, 1.94, 1.65 and 1.22 delta.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; The Upjohn Company; US5599930; (1997); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 4403-36-5, name is 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4403-36-5, Computed Properties of C10H8ClNO4S

Example 42 N-({(2R,3S)-3-[(4-azepan-1-ylpyrimidin-2-yl)amino]-1-cyclohexylpyrrolidin-2-yl }methyl)-2-(1,3 -dioxo-1,3-dihydro-2H-isoindol-2-yl)ethanesulfonamide (compound 42) N-[(2R,3S)-2-(aminomethyl)-1-cyclohexylpyrrolidin-3-yl]-4-azepan-1-ylpyrimidine-2-amine (33.2 mg) was dissolved in anhydrous tetrahydrofuran (0.8 mL) and dimethylformamide (0.4 mL) under an argon atmosphere at room temperature, trietylamine (24.8 muL) and 2-(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)ethanesulfonyl chloride (48.8 mg) were added into the solution and the solution was stirred at room temperature for overnight. The reaction solution was added aqueous saturated sodium hydrogen carbonate solution and extracted with ethyl acetate. The extract was washed with saturated brine, dried over anhydrous sodium sulfate and then concentrated. The residue was purified by Flash tube (trade mark) to obtain sulfonamide compound (49.0 mg). TLC: Rf 0.67 (chloroform: methanol = 5:1).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride, and friends who are interested can also refer to it.

Reference:
Patent; ONO PHARMACEUTICAL CO., LTD.; EP1852432; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 4403-36-5,Some common heterocyclic compound, 4403-36-5, name is 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride, molecular formula is C10H8ClNO4S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2-(1,3-Dioxo-1,3-dihydro-isoindol-2-yl)-ethanesulfonic acid (5-chloro-2-{2-[4-(4-fluoro-benzyl)-2-methyl-piperazin-1-yl]-2-oxo-ethoxy}-phenyl)-amide To a solution of of 2-(2-amino-4-chloro-phenoxy)-1-[4-(4-fluoro-benzyl)-2-methyl-piperazin-1-yl]-ethanone (0.050 g, 0.13 mmol) in methylene chloride (1 mL) at ambient temperature was added triethylamine (0.027 mL, 0.19 mmol) and 2-(1,3-dioxo-1,3-dihydro-isoindol-2-yl)-ethanesulfonyl chloride (0.045 g, 0.17 mmol). The reaction was stirred overnight at ambient temperature. Additional triethylamine ((0.027 mL, 0.19 mmol) and 2-(1,3-dioxo-1,3-dihydro-isoindol-2-yl)-ethanesulfonyl chloride (0.045 g, 0.17 mmol) was added, The reaction was stirred one hour, then additional triethylamine (0.055 mL, 0.34 mmol) was added. The reaction was stirred and hour, then additional 2-(1,3-dioxo-1,3-dihydro-isoindol-2-yl)-ethanesulfonyl chloride (0.090 g, 0.34 mmol) was added. After stirring an additional 1 hour, the reaction was treated with saturated aqueous sodium hydrogen carbonate and extracted with methylene chloride (3*). The combined organics were dried over magnesium sulfate, filtered and concentrated in vacuo. Purification via radial chromatography (2 mm plate) gave the title compound (0.030 g).

The synthetic route of 4403-36-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Blumberg, Laura C.; Brown, Matthew F.; Gladue, Ronald P.; McGlynn, Molly A.; Poss, Christopher S.; US2002/107255; (2002); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4403-36-5, name is 2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C10H8ClNO4S

Triethylamine (50 mul), DMAP (catalytic amount) and 2-(1,3-dioxo-1,3- dihydro-isoindol-2-yl)-ethanesulfonyl chloride (27.4 mg, 0.10 mmol) were added to 0.034 mmol 45. The reaction mixture was stirred at room temperature for 18 hours under an inert atmosphere. The reaction was monitored by TLC (EtOAc/hexane 3/7) (Rf44 = 0.5, Rf45 = 0, Rf268 = 0.4) and LC/MS. After completion of the reaction, the mixture was diluted with EtOAc (20mL) and washed with IN HCI, saturated NaHC03 and brine. The organic phase was dried (MgS04), filtered and concentrated in vacuo. The residue was purified by silica gel chromatography (ethylacetate/hexane – 3/7) to afford 2- (1,3-dioxo-1,3-dihydro-isoindol-2-yl)-ethanesulfonic 9- benzhydryloxy-7-(4-fluoro-benzyl)-8-oxo-7,8-dihydro-6H-pyrrolo[3,4-g]quinolin-5- yl ester 268 (12.2 mg, 50%).

The synthetic route of 4403-36-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GILEAD SCIENCES, INC.; CAI, Zhenhong, R.; CHEN, Xiaowu; FARDIS, Maria; JABRI, Salman, Y.; JIN, Haolun; KIM, Choung, U.; METOBO, Sanuel, E.; MISH, Michael, R.; PASTOR, Richard, M.; WO2005/117904; (2005); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem