Category: 41663-84-7

Electric Literature of 41663-84-7,The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research.

EXAMPLE 3 To a reaction vessel containing dimethylacetamide (25 ml) were added 4-nitro-N-methylphthalimide (0.51 g, 0.00248 mol), biphenyl (0.21 g, 0.00139 mol), sodium hydrogen sulfide (0.14 g, 0.00125 mol) and triethylamine (0.2 ml, 0.0014 mol). The reaction was allowed to proceed at 70 C. for 24 hours. Samples of the reaction mixture were taken and examined by HPLC. A yield of 19.6% 4,4′-bis(N-methylphthalimide)sulfide was indicated. The isolated yield was 18% (0.08 g).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Methyl-5-nitroisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; General Electric Company; US4625037; (1986); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Healthcare careers for chemists are once again largely based in laboratories, although increasingly there is opportunity to work at the point of care, helping with patient investigation., name: 2-Methyl-5-nitroisoindoline-1,3-dione

EXAMPLE I In a 500 ml three-necked flask equipped with a mechanical stirrer, Dean-Stark trap/condenser, nitrogen inlet, and thermometer was added 25.71 grams (0.20 moles) of p-chlorophenol, 100 ml dimethylsulfoxide, and 150 ml of chlorobenzene. After stirring and nitrogen purging the mixture for 30 min., 15.80 grams of aqueous sodium hydroxide (50.62 wt. %; 0.20 moles) was added. The mixture was heated up to 150 C. with the azeotropic removal of the water of reaction. After the removal of water was complete the temperature was lowered to 60 C. and 41.23 grams (0.20 moles) of 4-nitro-N-methyl phthalimide was added. The mixture was stirred overnight. Upon cooling to room temperature the product precipitated from solution. Filtration, washing the precipitate with water, and recrystallization from isopropanol yielded 50.8 grams of 4-(p-chlorophenyl)-N-methyl phthalimide. The melting point was 131-132 C.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Methyl-5-nitroisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; General Electric Company; US4623732; (1986); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 41663-84-7, name is 2-Methyl-5-nitroisoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 41663-84-7, HPLC of Formula: C9H6N2O4

EXAMPLE I In a 500 ml three-necked flask equipped with a mechanical stirrer, Dean-Stark trap/condenser, nitrogen inlet, and thermometer was added 25.71 grams (0.20 moles) of p-chlorophenol, 100 ml dimethylsulfoxide, and 150 ml of chlorobenzene. After stirring and nitrogen purging the mixture for 30 min., 15.80 grams of aqueous sodium hydroxide (50.62 wt. %; 0.20 moles) was added. The mixture was heated up to 150 C. with the azeotropic removal of the water of reaction. After the removal of water was complete the temperature was lowered to 60 C. and 41.23 grams (0.20 moles) of 4-nitro-N-methyl phthalimide was added. The mixture was stirred overnight. Upon cooling to room temperature the product precipitated from solution. Filtration, washing the precipitate with water, and recrystallization from isopropanol yielded 50.8 grams of 4-(p-chlorophenyl)-N-methyl phthalimide. The melting point was 131-132 C.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Methyl-5-nitroisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; General Electric Company; US4623732; (1986); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 41663-84-7, name is 2-Methyl-5-nitroisoindoline-1,3-dione, A new synthetic method of this compound is introduced below., Computed Properties of C9H6N2O4

Example 12Conversion of Treated 4NPI to BisimideA 2-liter, 5-necked oil jacketed glass vessel, equipped with a Dean and Stark receiver topped with a reflux condenser, a mechanical stirrer, and means for maintaining a nitrogen atmosphere, was charged with 335 g (1.63 mol) of 4-NPI in 1000 g of toluene (resulting from the bicarbonate treatment of the 4NPI/water slurry, see above), and 6.2 g (0.008 mol HEG-Cl) of a catalyst solution composed of 34.4% by wt. HEG-Cl, 10.0% sodium chloride, and 55.6% water. An additional 500 g of toluene was added. The solution was brought to reflux using an external hot oil unit set at 120 C. to supply hot oil to the jacket of the vessel, and the water was removed by azeotropic distillation. Approximately 500 g of toluene was removed during the distillation. The dry 4-NPI/catalyst toluene solution was then added via a flexible fitting to a 5-liter, 5-necked oil jacketed glass vessel (equipped with a Dean and Stark Receiver topped with a reflux condenser, mechanical stirrer, and means for maintaining a nitrogen atmosphere) containing 222 g (8.15 mol) of BPA disodium salt and 700 g of toluene (the salt solution can also be added to the NPI solution). The temperature on the 5-liter vessel was maintained at 120 C. using a hot oil recirculating unit. HPLC of the reaction mixture indicated that the displacement reaction was complete in 60 min. to afford a 99.4% yield of BPA bisimide. The mixture was cooled to 80 C. and extractively purified with three 580 mL portions of 1% aqueous sodium hydroxide to afford pure bisimide with a yellowness index (YI) of 2.0.The YI was measured with a Macbeth 7000 spectrometer using ASTM D-1925. A blank of methylene chloride was measured for YI prior to measurement of the sample. This YIblank measurement was recorded for use in correcting the final measurement. About 0.5 g of a sample was dissolved into 10 mL of methylene chloride. The sample was then filtered through a 0.5 g HPLC filter. The mixture was then transferred to a 3.7 cm×5 cm×10 mm path length cell. The cell was placed into the calorimeter (ASTM D11925) and the YI was determined.The equation (I) below was used to correct the YI. This equation (I) is general and allows for solutions to also be measured for YI.YIcor=(YImeas-YIblank)*0.5*100/(wt. Sample in G*% solids of the sample) (I) The washes were done at 80 C., with a 5 minute agitation time and a 7 minute settling time. The YI of the material was 2.2. The YI of a typical reaction (without bicarbonate treatment of the 4NPI/water slurry) is 3 to 4.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SABIC Innovative Plastics IP B.V.; US2009/292128; (2009); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 41663-84-7, These common heterocyclic compound, 41663-84-7, name is 2-Methyl-5-nitroisoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 6 To a reaction vessel were added 4-nitro-N-methylphthalimide (0.51 g, 0.00248 mol), sodium hydrogen sulfide (0.07 g, 0.00125 mol), biphenyl (0.204 g, 0.00132 mol), triethylamine (0.2 ml, 0.0014 mol), tetrabutylphosphonium bromide (0.15 g, 0.00044 mol) and dry toluene (40 ml). The reaction mixture was allowed to proceed at reflux (approximately 145 C.) for 18 hours. The reaction mixture was sampled and tested by HPLC which indicated a yield of 4,4′-bis(N-methylphthalimide)sulfide of 10% (0.04 g).

Statistics shows that 2-Methyl-5-nitroisoindoline-1,3-dione is playing an increasingly important role. we look forward to future research findings about 41663-84-7.

Reference:
Patent; General Electric Company; US4625037; (1986); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 41663-84-7, name is 2-Methyl-5-nitroisoindoline-1,3-dione, molecular formula is C9H6N2O4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C9H6N2O4

Example 4. To a reaction vessel were added 4-nitro-N-methylphthalimide (0.51g, 0. 00248 mol), sodium hydrogen sulfide (0.07g, 0.00125 mol), biphenyl (0.204g, 0.00132 mol), triethylamine (0.2 ml, 0.0014 mol), tetrabutylphosphonium bromide (0.15g, 0.00044 mol) and dry toluene (40 ml). The reaction mixture was allowed to proceed at reflux (approximately 145C) for 18 hours. The reaction mixture was sampled and tested by HPLC which indicated a yield of 4,4′-bis(N-methylphthalimide)sulfide of 10% (0.04g).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 41663-84-7, its application will become more common.

Reference:
Patent; GENERAL ELECTRIC COMPANY; EP172298; (1991); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 41663-84-7,Some common heterocyclic compound, 41663-84-7, name is 2-Methyl-5-nitroisoindoline-1,3-dione, molecular formula is C9H6N2O4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In the homogeneous mixing of three reaction bottle, under the protection of nitrogen at room temperature by adding 300 mL of dimethylsulfoxide (moisture <500ppm). Then, 150 g of N-methyl-4-nitrophthalimide and 169 g of sodium phenolate were added, Heated to 120 C for 24 hours. Cooled to room temperature, The reaction solution was slowly added to 900 mL of ice water in China, Stirring for 30 minutes, filtering, filter cake with water 150mL * 3 washing, filter cake out to get the product 171g, the yield of 93%, HPLC purity of 98% These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Methyl-5-nitroisoindoline-1,3-dione, its application will become more common.

Synthetic Route of 41663-84-7,Some common heterocyclic compound, 41663-84-7, name is 2-Methyl-5-nitroisoindoline-1,3-dione, molecular formula is C9H6N2O4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 2. To a reaction vessel containing dimethylacetamide (25 ml) were added 4-nitro-N-methylphthalimide (0.50g, 0.00243 mol), biphenyl (0.204g, 0.00132 mol) and sodium hydrogen sulfide (0.14g, 0.0025 mol). The reaction was allowed to proceed at 70C for 24 hours. samples of the reaction mixture were taken and examined by HPLC methods. A yield of 16.3% 4,4’bis(N-methylphthalimide)sulfide was indicated. The isolated yield was 15% (0.035g).

The synthetic route of 41663-84-7 has been constantly updated, and we look forward to future research findings.

Reference of 41663-84-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 41663-84-7, name is 2-Methyl-5-nitroisoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 3 To a reaction vessel containing dimethylacetamide (25 ml) were added 4-nitro-N-methylphthalimide (0.51 g, 0.00248 mol), biphenyl (0.21 g, 0.00139 mol), sodium hydrogen sulfide (0.14 g, 0.00125 mol) and triethylamine (0.2 ml, 0.0014 mol). The reaction was allowed to proceed at 70 C. for 24 hours. Samples of the reaction mixture were taken and examined by HPLC. A yield of 19.6% 4,4′-bis(N-methylphthalimide)sulfide was indicated. The isolated yield was 18% (0.08 g).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Methyl-5-nitroisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; General Electric Company; US4625037; (1986); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 41663-84-7, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 41663-84-7 as follows.

EXAMPLE 7 A first 2-l oil-jacketed reactor with a bottom valve was equipped with a mechanical stirrer, Dean-Stark trap topped with a reflux condenser, and nitrogen supply means. It was charged with 260.8 g (1.265 moles) of 4-nitro-N-methylphthalimide, 473 ml of ODCB and 25 g (95 mmol) of HEGCl (dried from a brine solution as described hereinabove). The solution was heated to reflux and 100 ml of ODCB was removed with a nitrogen sweep. A second, similarly equipped 2-l oil-jacketed reactor was placed under the first reactor and charged with 124 g (1.265 mole) of potassium acetate and 293 ml of ODCB. This mixture was heated and ODCB removed in the same way. The contents of the first reactor were transferred over 10 minutes, with stirring, to the second via a transfer tube, with maintenance of the temperature at 1 85 C. Refluxing was observed and colorless oxides of nitrogen evolved; they turned brown upon exposure to air. Heating and stirring were continued for 6 hours, after which the mixture was allowed to cool and solids were removed over 4 hours by suction filtration through a fritted funnel. The solids so removed were washed twice with 100-ml portions of water and vacuum dried at 140 C., yielding the desired 4,4′-oxybis(N-methylphthalimide) in 71% yield.

According to the analysis of related databases, 41663-84-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; General Electric Company; US6028203; (2000); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem