Category: 39755-95-8

These common heterocyclic compound, 39755-95-8, name is 5-Methoxyisatin, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: indolines-derivatives

General procedure: Fe 3 O 4 /COSbeta-CD-SO 3 H NPs (V) (0.02 g) were added to a mixture of isatin (1 mmol, 0.147 g), 5,5-dimethylcyclohexane-1,3-dione (dimedone) (1 mmol, 0.140g), and malononitrile (1mmol, 0.066g) in water (4mL). The mixture was magnetically stirred at 50C, for 20min. Reaction progress was monitored by TLC (n-hexane:EtOAc, 3:1). Upon reaction completion, the catalyst was removed by an external magnet, washed with water (10mL), and dried overnight to be ready for the next run. The formed solid was filtered off, washed with warm water, then dried to obtain pure products (0.328g, 98%).

The synthetic route of 5-Methoxyisatin has been constantly updated, and we look forward to future research findings.

Reference:
Article; Mohammadian, Narges; Akhlaghinia, Batool; Research on Chemical Intermediates; vol. 45; 10; (2019); p. 4737 – 4756;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 39755-95-8, name is 5-Methoxyisatin, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 5-Methoxyisatin

General procedure: A mixture of isatin derivatves (1 mmole), malononitrile (1 mmole),1,3-dicarbonyl compounds (1 mmole), and Fe3+-mont. (0.05 g) in CH3CN(5 mL) was heated using an Elmasonic S 40 H ultrasonic cleaning unit at 50 C under silent condition. The progress of the reaction was monitored by TLC (EtOAc/hexane 3:7). After completion of the reaction, the catalyst was removed by filtration. Water was added to the residue. The solid which was obtained was filtered off and dried to provide pure products of the spirooxindole derivatives (4a-j) (Table 3).

According to the analysis of related databases, 39755-95-8, the application of this compound in the production field has become more and more popular.

Reference:
Article; Mamaghani, Manouchehr; Tabatabaeian, Khalil; Pourshiva, Mina; Nia, Roghayeh Hossein; Journal of Chemical Research; vol. 39; 6; (2015); p. 314 – 317;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 39755-95-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 39755-95-8 as follows.

EXAMPLE 21 8-Methoxyindolo[2,1-b]quinazoline-6,12-dione STR29 Using the procedure in Example 12 and substituting isatoic anhydride for 5-chloroisatoic anhydride and 5-methoxyisatin for 5-fluoroisatin gave the title compound in 24% yield: mp 267.6-269 C.; 1 H NMR (300 MHz, DMSO-d6) delta 8.28 (d, 1H) 8.25 (d, 1H) 7.93 (d, 2H) 7.68-7.78 (m, 1H) 7.37-7.46 (m, 2H) 3.88 (s, 3H); MS (M+H)+ 279.

According to the analysis of related databases, 39755-95-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; PathoGenesis Corporation; US5441955; (1995); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

39755-95-8, name is 5-Methoxyisatin, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C9H7NO3

General procedure: A mixture of malononitrile (1 mmol), isatin (1 mmol), dicarbonyl (1 mmol), PEGOSO3H(0.1 mmol), and water (2 mL) was stirred under reflux for the appropriate time (shown in Tables 3, 4). After completion of the reaction, the reaction mixture was filtered and the residue was washed with ethanol. The crude solid product was recrystallized from EtOH to afforded the pure products in high purity and yield.Assignment of the structures of the products was based on their 1H NMR, 13C NMR,and IR spectra.

The synthetic route of 39755-95-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Nasseri; Zakerinasab; Research on Chemical Intermediates; vol. 41; 8; (2015); p. 5261 – 5270;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 39755-95-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 39755-95-8 as follows.

Synthesis Example 90; ()-trans-6-Benzyl-3-hydroxy-2, 2-dimethyl-4-[(2-phenylethyl) amino] -2,3, 4,6-tetrahydro -pyrano [2, 3-findol-7-one ;N-Benzyl-5-methoxyisatin To a solution of 5-methoxyisatin (15.0 g, 84.7 mmol) in DMF (100 mL), sodium hydride (5.1 g, 127 mmol) and benzyl bromide (12.1 mL, 101.6 mmol) were added at 0C, and the resulting mixture was stirred for 1 hour. Water was added thereto, and the resulting solution was extracted with ethyl acetate. The resulting organic phase was washed with saturated aqueous ammonium chloride solution and then with saturated sodium chloride solution, dried over anhydrous sodium sulfate, and concentrated to obtain the aimed product (yield : 96%). Brown solid 1 H-NMR (CDC13) 6 ; 3.77 (s, 3H), 4.91 (s, 2H), 6.67 (d, J= 8.5 Hz, 1H), 7.0-7. 1 (m, 1H), 7.15 (m, 1H), 7.25-7. 45 (m, 5H)

According to the analysis of related databases, 39755-95-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; NISSAN CHEMICAL INDUSTRIES, LTD.; WO2005/90357; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 39755-95-8, name is 5-Methoxyisatin, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C9H7NO3

General procedure: Isatins I (3.0 mmol) was dissolved in anhydrous DMF (15 mL), and the resultant solution was cooled to 0 C (ice bath), whereupon sodium hydride (60% dispersion in mineral oil, 140mg, 3.5 mmol, 1.17 equiv) was added in one portion and stirred for 5 minutes. Iodomethane (497 mg, 3.5 mmol, 1.17 equiv) or benzyl bromide (564.3 mg, 3.3 mmol, 1.1 equiv) was added and the reaction was stirred at 0 C for 30min. The reaction was monitored by TLC until I was fully consumed. The reaction mixture was then poured into saturated aqueous NH4Cl and extracted with ethyl acetate. The combined organic portions were washed with water and brine, dried (MgSO4), filtered, and concentrated to give N-methyl isatins and N-benzyl isatins II (90%-100% yield).

The synthetic route of 5-Methoxyisatin has been constantly updated, and we look forward to future research findings.

Reference:
Article; Liang, Jin-Yan; Wang, Hui; Yang, Yan-Li; Shen, Shou-Jie; Chen, Jian-Xin; Tetrahedron Letters; vol. 58; 27; (2017); p. 2636 – 2639;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 39755-95-8, A common heterocyclic compound, 39755-95-8, name is 5-Methoxyisatin, molecular formula is C9H7NO3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The combined extracts were dried over anhydrous sodium sulfate and concentrated to give 5.1 g (65% yield) of 5-methoxyisatin as a dark red solid. 5-Methoxyisatin (5.0 g) and 30 mL of hydrazine hydrate were heated to reflex for 15 minutes. The reaction mixture was cooled to room temperature and 50 mL of water was added. The mixture was extracted 3 times with 25 mL of ethyl acetate each time, the organic layers combined, dried over anhydrous sodium sulfate and concentrated to give a yellow solid. The solid was stirred in ethyl acetate and 11 g of insoluble material was removed by vacuum filtration and saved. This material proved to be 2-hydrszinocmbonylmethyl-4-anisidine. The filtrate was concentrated and chromatographed on silica gel eluding with ethyl acetate:hexane (1:1) to give 0.7 g of 5-methoxy-2-oxindole as a yellow solid. The 11 g of 2-hydrazinocarbonylmethyl-4-anisidine was refluxed for 1 hour in 20 mL of 1N sodium hydroxide. The mixture was cooled, acidified to pH 2 with concentrated hydrochloric acid and extracted 3 times with 25 mL of ethyl acetate each time. The organic extracts were combined, washed with brine, dried over anhydrous sodium sulfate and concentrated to give 0.8 g of 5-methoxy-2-oxindole as a yellow solid. The combined yield was 1.5 g or 33%.

The synthetic route of 39755-95-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sugen, Inc.; US6878733; (2005); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 39755-95-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 39755-95-8 as follows.

Synthesis of 5-methoxyoxindole; [0095] To a solution of 5-methoxyisatin ( 10.62 g, 60 mmol) in DMSO (30 mL) was added N2H4 xH20 (hydrazine hydrate, 6 mL, 120 mmol) dropwise over 5 min (exothermic). After addition, the resulting mixture was heated at 140 C (oil temp.) for 2h and then cooled to rt. After diluting with H20 (30 mL), 6 M HC1 (12 mL, 72 mmol) was added and the resulting mixture was stirred for lh at rt. Ice (30 mL) was added and the reaction mixture was stirred O/N at rt. The precipitate formed was collected by suction filtration, rinsed with H20, then dried to give the 5-methoxyoxindole (6.523 g) as a brown solid, (about 10% impurity being the oxime from starting material 5-methoxyisatin) NMR (400 MHz, d6- DMSO) 6.78 (s, 1H), 6.85 (s, 1 H), 6.72-6.79 (m, 2H), 3.39 (s, 3H); ESI 164.0 [M + H]+, calcd for [C9H9N02 + H]+ 164.1.

According to the analysis of related databases, 39755-95-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; UNIVERSITY HEALTH NETWORK; SAMPSON, Peter Brent; LIU, Yong; LI, Sze-Wan; FORREST, Bryan T.; PAULS, Heinz W.; EDWARDS, Louise G.; FEHER, Miklos; PATEL, Narendra Kumar B.; LAUFER, Radoslaw; PAN, Guohua; WO2011/123946; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 39755-95-8, The chemical industry reduces the impact on the environment during synthesis 39755-95-8, name is 5-Methoxyisatin, I believe this compound will play a more active role in future production and life.

General procedure: Isatins (1a-j, 3.0 g), hydrazine hydrate (80%, 13 mL) and water (13 mL) were added to a flask equipped with a thermometer with vigorous stirring. The reaction mixture was kept at 140 C in an oil bath for 6 h before being cooled to r.t., when hydrochloric acid (2.0 mol L-1) was added to bring the pH to pH 2. The reaction mixture was stirred at r.t. for 12 h. Compounds 2a-j were obtained by filtering under vacuum and recrystallisation from absolute ethanol.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methoxyisatin, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Zhang, Chao; Xu, Juan; Zhao, Xinyu; Kang, Congmin; Journal of Chemical Research; vol. 41; 9; (2017); p. 537 – 540;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 39755-95-8, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 39755-95-8, name is 5-Methoxyisatin, This compound has unique chemical properties. The synthetic route is as follows.

Intermediate 20: 5-Methoxyindolin-2-one[0507] A solution of 5-methoxyisatin (1.0 g, 5.6 mmol) in hydrazine hydrate (85%, 6.0 mL) was refluxed for 3 h. After the mixture was concentrated, the residue was treated with 50%> aqueous NaOH solution (40.0 mL) and the resulting mixture was stirred at room temperature for 48 h. The mixture was poured into water and extracted with diethyl ether. The combined extracts were washed with brine, dried over anhydrous Na2S04 and concentrated. The residue was purified by flash column chromatography (PE/EA = 10: 1 to 2:1) to afford 184 mg of the title compound as a white solid (20% yield).

The chemical industry reduces the impact on the environment during synthesis 5-Methoxyisatin. I believe this compound will play a more active role in future production and life.

Reference:
Patent; ZENOBIA THERAPEUTICS, INC.; BOUNAUD, Pierre-Yves; NIENABER, Vicki; STEENSMA, Ruo, W.; LOWE, John, A., III; WO2012/178015; (2012); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem