Category: 39755-95-8

With the volume and accessibility of scientific research increasing across the world, it has never been more important to continue building the reputation for quality and ethical publishing we’ve spent the past two centuries establishing., Electric Literature of 39755-95-8

General procedure: A mixture of malononitrile (1 mmol), isatin (1 mmol), dicarbonyl (1 mmol), PEGOSO3H(0.1 mmol), and water (2 mL) was stirred under reflux for the appropriate time (shown in Tables 3, 4). After completion of the reaction, the reaction mixture was filtered and the residue was washed with ethanol. The crude solid product was recrystallized from EtOH to afforded the pure products in high purity and yield.Assignment of the structures of the products was based on their 1H NMR, 13C NMR,and IR spectra.

You can get involved in discussing the latest developments in this exciting area about 5-Methoxyisatin.

Reference:
Article; Nasseri; Zakerinasab; Research on Chemical Intermediates; vol. 41; 8; (2015); p. 5261 – 5270;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Chemistry graduates have much scope to use their knowledge in a range of research sectors, including roles within chemical engineering, chemical and related industries, healthcare and more. , 39755-95-8

General procedure: The preparation was divided into two steps. Firstly, substituent indoline-2,3-dione (1 equiv) was dissolved in ethanol (10 mL), hydrazine hydrate (2 mL) was added. The reaction mixture was refluxed with magnetic stirring for 3 h and cooled to 0 C, then sodium hydroxide (3 equiv) was added, refluxed for 0.5 h and cooled to room temperature, then 150 mL water was added. The mixture was acidified by adding 2 N hydrochloric acid to pH 2, and extracted twice with dichloromethane. The organic filtrate was washed twice with brine, dried (Na2SO4), and then concentrated to give corresponding indolin-2-one by high-vacuum drying. Secondly, a mixture of the corresponding indolin-2-one (1 equiv) and furan-2-carbaldehyde (1 equiv) in ethanol was added two drops of piperidine and refluxed with magnetic stirring for 5 h. After the mixture cooled, the precipitate was filtered, washed with cold ethanol, dried, and recrystallized from methanol to afford the terminal product.

Hope you enjoy the show about 39755-95-8.

Reference:
Article; Zhong, Ye; Xue, Mengzhu; Zhao, Xue; Yuan, Jun; Liu, Xiaofeng; Huang, Jin; Zhao, Zhenjiang; Li, Honglin; Xu, Yufang; Bioorganic and Medicinal Chemistry; vol. 21; 7; (2013); p. 1724 – 1734;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Career opportunities within science and technology are seeing unprecedented growth across the world, and those who study chemistry or another natural science at university now have increasingly better career prospects. SDS of cas: 39755-95-8

General procedure: Fe 3 O 4 /COSbeta-CD-SO 3 H NPs (V) (0.02 g) were added to a mixture of isatin (1 mmol, 0.147 g), 5,5-dimethylcyclohexane-1,3-dione (dimedone) (1 mmol, 0.140g), and malononitrile (1mmol, 0.066g) in water (4mL). The mixture was magnetically stirred at 50C, for 20min. Reaction progress was monitored by TLC (n-hexane:EtOAc, 3:1). Upon reaction completion, the catalyst was removed by an external magnet, washed with water (10mL), and dried overnight to be ready for the next run. The formed solid was filtered off, washed with warm water, then dried to obtain pure products (0.328g, 98%).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms. In my other articles, you can also check out more blogs about 39755-95-8.

Reference:
Article; Mohammadian, Narges; Akhlaghinia, Batool; Research on Chemical Intermediates; vol. 45; 10; (2019); p. 4737 – 4756;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 39755-95-8, name is 5-Methoxyisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 5-Methoxyisatin

General procedure: A mixture of isatin derivatves (1 mmole), malononitrile (1 mmole),1,3-dicarbonyl compounds (1 mmole), and Fe3+-mont. (0.05 g) in CH3CN(5 mL) was heated using an Elmasonic S 40 H ultrasonic cleaning unit at 50 C under silent condition. The progress of the reaction was monitored by TLC (EtOAc/hexane 3:7). After completion of the reaction, the catalyst was removed by filtration. Water was added to the residue. The solid which was obtained was filtered off and dried to provide pure products of the spirooxindole derivatives (4a-j) (Table 3).

The synthetic route of 39755-95-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Mamaghani, Manouchehr; Tabatabaeian, Khalil; Pourshiva, Mina; Nia, Roghayeh Hossein; Journal of Chemical Research; vol. 39; 6; (2015); p. 314 – 317;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 39755-95-8, These common heterocyclic compound, 39755-95-8, name is 5-Methoxyisatin, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: GN/SO3H (80 mg) was added to the 3 mL of EtOH/water (1:1) and dispersed for 30 min. Then, malononitrile (1 mmol), isatin (1 mmol), and dimedone (1 mmol) were added to the mixture and the mixture was heated to reflux and kept at this temperature for an appropriate time. After the time of reaction was completed, water was separated by centrifuging followed by extracting the crude product by ethyl acetate. The solvent was dried using Na2SO4 and removed from the reaction by evaporation with a rotary evaporator. Finally, the crude product was recrystallized in hot ethanol to achieve the pure product. The GN/SO3H nanocomposite was washed and reused several times.

The synthetic route of 39755-95-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri; Research on Chemical Intermediates; vol. 44; 11; (2018); p. 6979 – 6993;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 39755-95-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 39755-95-8, name is 5-Methoxyisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a stirring solution of indolin-2,3-dione (2.0g, 13.6 mmol, 1.0 equiv.) in anhydrous DMF, sodium hydride (60% suspension inparaffin oil, 0.65 g, 16.32 mmol, 1.2 equiv.) was slowly added at 0 oCunder inert atmosphere. After 1 h, benzyl bromide (1.78 mL, 14.96 mmol,1.1 equiv.) or prenyl bromide (1.73 mL, 14.96 mmol,1.1 equiv.) or methyl iodide ( 0.93 g, 14.96, 1.1equiv.) was added dropwise. Reaction mixture was stirred for another hour.Completion of the reaction was monitored by TLC. The reaction mixture was thenquenched with aq. NH4Cl, washed with water, extracted into ethylacetate. The ethyl acetate fraction was dried over anhydrous sodiumsulfate. It was evaporated under vacuumto give a solid compound which was purified by column chromatography on silicagel (60-120 mesh) using ethyl acetate-hexane (3:97) mixture as eluent.

The synthetic route of 5-Methoxyisatin has been constantly updated, and we look forward to future research findings.

Reference:
Article; Gangar, Mukesh; Kashyap, Naresh; Kumar, Kapil; Goyal, Sandeep; Nair, Vipin A.; Tetrahedron Letters; vol. 56; 51; (2015); p. 7074 – 7081;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 39755-95-8, name is 5-Methoxyisatin, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 5-Methoxyisatin

General procedure: 30 mg of SiO2_g-C3N4 nanocomposite was dispersed in aqueous media (3 ml) for 30 min and dimedone or 4-hydroxycoumarin (1 mmol), malononitrile (1 mmol) and isatin (1.0 mmol) were added to the mixture. Then, the mixture was stirred at reflux conditions for an appropriate time, while the reaction progress was monitored by thin layer chromatography (TLC). After the reaction was completed, ethyl acetate was employed for the extraction of crude product and the products were dried over anhydrous Na2SO4. The solvent was evaporated followed by recrystallizing of the crude product in hot ethanol, and pure products were identified by IR, 1H and 13C NMR spectral data. The SiO2_g-C3N4 nanocatalyst was washed with EtOH, dried and reused for the next run.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 39755-95-8.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri, Mohammad Ali; Research on Chemical Intermediates; vol. 44; 2; (2018); p. 1173 – 1188;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 39755-95-8, name is 5-Methoxyisatin, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 5-Methoxyisatin

General procedure: 30 mg of SiO2_g-C3N4 nanocomposite was dispersed in aqueous media (3 ml) for 30 min and dimedone or 4-hydroxycoumarin (1 mmol), malononitrile (1 mmol) and isatin (1.0 mmol) were added to the mixture. Then, the mixture was stirred at reflux conditions for an appropriate time, while the reaction progress was monitored by thin layer chromatography (TLC). After the reaction was completed, ethyl acetate was employed for the extraction of crude product and the products were dried over anhydrous Na2SO4. The solvent was evaporated followed by recrystallizing of the crude product in hot ethanol, and pure products were identified by IR, 1H and 13C NMR spectral data. The SiO2_g-C3N4 nanocatalyst was washed with EtOH, dried and reused for the next run.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 39755-95-8.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri, Mohammad Ali; Research on Chemical Intermediates; vol. 44; 2; (2018); p. 1173 – 1188;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 39755-95-8, The chemical industry reduces the impact on the environment during synthesis 39755-95-8, name is 5-Methoxyisatin, I believe this compound will play a more active role in future production and life.

The mixture was poured into 500 g of ice and extracted 3 times with ethyl acetate. The combined extracts were dried over anhydrous sodium sulfate and concentrated to give 5.1 g (65% yield) of 5-methoxyisatin as a dark red solid. 5-Methoxyisatin (5.0 g) and 30 mL of hydrazine hydrate were heated to reflux for 15 minutes. The reaction mixture was cooled to room temperature and 50 mL of water was added. The mixture was extracted 3 times with 25 mL of ethyl acetate each time, the organic layers combined, dried over anhydrous sodium sulfate and concentrated to give a yellow solid. The solid was stirred in ethyl acetate and 1.1 g of insoluble material was removed by vacuum filtration and saved. This material proved to be 2-hydrazinocarbonylmethyl-4-anisidine. The filtrate was concentrated and chromatographed on silica gel eluding with ethyl acetate:hexane (1:1) to give 0.7 g of 5-methoxy-2-oxindole as a yellow solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methoxyisatin, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Sugen, Inc.; US6114371; (2000); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 39755-95-8, name is 5-Methoxyisatin, A new synthetic method of this compound is introduced below., Quality Control of 5-Methoxyisatin

A mixture of 5-methoxyisatin (2.84 g, 16 mmol) and K2CO3 (5.53 g, 40mmol) was dissolved in anhydrous DMF (12 mL) under Ar. Benzylbromide (5.71 mL, 48 mmol) was added dropwise and the mixturewas stirred at r.t. for 19 h. The mixture was extracted with dichloromethane (3 × 20 mL) and the organic phase was washed with H2O (20mL) and brine (20 mL), dried with MgSO4, filtered, and concentratedto obtain a red solid.14The crude material was dissolved in DMSO (12mL), hydrazine hydrate (1.81 mL, 32 mmol) was added dropwise andthe mixture was heated at 150 C for 5 h. The mixture was cooled tor.t., extracted with EtOAc (2 × 100 mL), and the organic phase waswashed with H2O (100 mL) and brine (50 mL), dried over MgSO4, filtered, and concentrated. The residue was purified by flash chromatography (hexane/EtOAc) to give pure 1-benzyl-5-methoxy-2-oxindole (2.55 g, 63%) as a brown oil.15The above product was dissolved in acetic anhydride (11.5 mL, 121mmol) and DMAP (37 mg, 0.3 mmol) was added. The mixture was heated at reflux (140 C) for 6 h and then cooled to r.t. and evaporated under reduced pressure. The residue was dissolved in MeOH (40 mL)cooled at 0 C and then a solution of KOH (8.5 g, 151 mmol) in MeOH (60 mL) was added. The solution was stirred at r.t. for 18 h then the solution was cooled in an ice-bath at 0 C and 12 M aqueous HCl was added until pH 3. The organic solvent was evaporated under reduced pressure, H2O (50 mL) was added and the mixture was extracted with EtOAc (3 × 50 mL). The organic phase was dried over MgSO4, filtered,and concentrated. The residue was purified by flash chromatography(hexane/EtOAc) to give pure 2c.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Ortega-Martinez, Aitor; Molina, Cynthia; Moreno-Cabrerizo, Cristina; Sansano, Jose M.; Najera, Carmen; Synthesis; vol. 49; 23; (2017); p. 5203 – 5210;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem