Category: 3484-35-3

Application of 3484-35-3, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3484-35-3, name is 5-Methylindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: A 50 mL round-bottom flask equipped with a reflux condenser and a magnetic stir bar was charged with indolin-2-one (10.0 mmol), ethanol(10 mL), acetone (7.3 mL, 0.1 mmol, 10.0 equiv), benzylamine(0.33 mL, 3.0 mmol, 0.3 equiv), and acetic acid (0.17 mL, 3.0 mmol,0.3 equiv). Then, the reaction mixture was heated under reflux for 2 h. The precipitation was filtered off and washed with cold PE (10 mL). The obtained product was dried for 30 min and used without further purification.

The chemical industry reduces the impact on the environment during synthesis 5-Methylindolin-2-one. I believe this compound will play a more active role in future production and life.

Reference:
Article; Hu, Wei-Qiang; Xu, Xiu-Hua; Qing, Feng-Ling; Journal of Fluorine Chemistry; vol. 208; (2018); p. 73 – 79;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3484-35-3, name is 5-Methylindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 5-Methylindolin-2-one

General procedure: The mixture of oxindole 1 (0.1 mmol), beta,gamma-unsaturated alpha-keto ester 2 (0.12 mmol),DABCO (0.02 mmol) in 1 mL H2O were stirred at room temperature. After stirringfor the indicated time, the mixture was extracted with ethyl acetate. The combinedorganic phase was dried over Na2SO4 and concentrated in vacuo. The residue wasfurther purified by washing with PE/EA to afford the desired products.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3484-35-3.

Reference:
Article; Han, Man-Yi; Pan, Ping; Sheng, Fei-Fei; Synlett; vol. 28; 11; (2017); p. 1378 – 1382;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 3484-35-3,Some common heterocyclic compound, 3484-35-3, name is 5-Methylindolin-2-one, molecular formula is C9H9NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a one-neck round-bottom flask equipped with magnetic stirringwas added 6-chloro-2-indolinone (2a, 1.00 g, 6.0 mmol),vinamidinium salt 324 (2.02 g, 12.0 mmol), Et3N (1.82 g, 18.0mmol), and DMF (10 mL). The mixture was stirred for 20 h atr.t., after the reaction was complete (monitored by TLC,EtOAc/MeOH = 20:1), 30 mL EtOAc and 30 mL water was added,then the aqueous layer was extracted with 30 mL EtOAc. Thecombined EtOAc layer was washed with sat. NaCl solution (15mL) and water (15 mL) then dried over Na2SO4. After filteringthe desiccant, the solvent was concentrated under vacuum to avolume of about 5 mL. The mixture was titrated with 15 mL nhexaneto give a yellow precipitant, the solid was filtered, anddried under vacuum to give 4a (1.34 g, yield 88%), a yellowpowder, which was used in the next step without further purification;mp > 250 C.

The synthetic route of 3484-35-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Tian, Shaixiao; Mao, Yu; Jiang, Yongjun; Xu, Guangyu; Synlett; vol. 29; 7; (2018); p. 949 – 953;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 3484-35-3, These common heterocyclic compound, 3484-35-3, name is 5-Methylindolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A reaction mixture of compound 19-21 (2.35 mmol),compound 14-18 (2.14 mmol) and 2 drops of piperidine was stirred at RT for 3 h. The precipitate was filtered off and dried. The crude compound was purified by column chromatography using ethyl acetate in dichloromethane (13%) to afford the desired products (4, 22-32).

Statistics shows that 5-Methylindolin-2-one is playing an increasingly important role. we look forward to future research findings about 3484-35-3.

Reference of 3484-35-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3484-35-3, name is 5-Methylindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

3-Methylindole-2-carbaldehyde was prepared as described in the literature: 1) David W. M. Benzies, Pilar Matinez Fresneda and R. Alan Jones, Synthetic Communications, 16 (14), 1799-1807 (1986) and 2) Chatterjee, A. and Biswas, K. M., J. Org. Chem., 1973, 38,4002. A mixture of 5-methyl-2-oxindole (59 mg), 3-methylindole-2-carbaldehyde (56 mg) and piperidine (30 mg) in ethanol (1 mL) was heated in a sealed tube at 90 C. for overnight. The mixture was cooled to room temperature. The solid was collected by vacuum filtration, washed with cold ethanol and dried in a vacuum oven for overnight to give 72 mg (74% yield) of 5-methyl-3-(3-methyl-1H-indol-2-ylmethylene)-1,3-dihydro-indol-2-one. 1H NMR (360 MHz, DMSO-d6) 13.03 (s, br, 1H, NH), 10.88 (s, br, 1H, NH), 7.84 (s, 1H, vinyl), 7.71 (s, br, 1H), 6.62 (d, J=8 Hz, 1H), 7.48 (d, J=8 Hz, 7.26 (t, J=7 Hz, 1H), 7.06 (t, J=7 Hz, 1H), 7.0 (d, J=8 Hz, 1H), 6.78 (d, J=8 Hz, 1H), 2.59 (s, 3H, CH3), 2.32 (s, 3H, CH3). MS m/z 289 [M+1]+.

The synthetic route of 5-Methylindolin-2-one has been constantly updated, and we look forward to future research findings.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3484-35-3, name is 5-Methylindolin-2-one, A new synthetic method of this compound is introduced below., SDS of cas: 3484-35-3

General procedure: To a solution of 3-substituted-5-benzylidene-2-thioxo-4-thiazolidinone (3a-3h, 8a-8f) (0.003 mol) in 1,4-dioxane (15 ml) was added HC(OEt)3 (2 ml) and BF3·Et2O (2 ml). The reaction mixture was heated to 80 C and stirring was continued at the same temperature for 4 h. The resulting 2-ethylthio-3-substituted-5-benzylidene-4-thiazolium fluoroborate (4a-4h, 9a-9f) was precipitated, filtered off, and dried without any additional purification, as starting material for the following reactions. To a mixture of thiazolium fluoroborate (4a-4h, 9a-9f) (0.003 mol) and indolin-2-one (11a-11f) (0.003 mol) in acetonitrile (15 ml) was added triethylamine (0.91 g, 0.009 mol) dropwise at 25 C, and the mixture was stirred for 4 h at the same temperature. The orange precipitate was collected and washed with ethyl acetate (8 ml). The crude product thus obtained was recrystallized from methanol or acetone to give compound (5a-5s, 10a-10s).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Application of 3484-35-3,Some common heterocyclic compound, 3484-35-3, name is 5-Methylindolin-2-one, molecular formula is C9H9NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solution of appropriate oxindole (7a-e, 0.3 mmol) in ethanol (3 mL) was added corresponding aldehydes (11a-e,0.32 mmol) and a catalytic amount of piperidine. The reaction mixture was stirred at reflux for 6-12 h (reaction monitored byTLC). After cooling, the precipitate was filtered, washed with cold ethanol, and dried in air to furnish pure (Z)-3-(3′-methoxy-4′-(2-amino-2-oxoethoxy)-benzylidene)indolin-2-ones title compounds of formula (4a-v) as yellow/brown/orange solids in moderate to excellent yields.

The synthetic route of 3484-35-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Senwar, Kishna Ram; Reddy, T. Srinivasa; Thummuri, Dinesh; Sharma, Pankaj; Naidu; Srinivasulu, Gannoju; Shankaraiah, Nagula; European Journal of Medicinal Chemistry; vol. 118; (2016); p. 34 – 46;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 3484-35-3,Some common heterocyclic compound, 3484-35-3, name is 5-Methylindolin-2-one, molecular formula is C9H9NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: The mixture of oxindole 1 (0.1 mmol), beta,gamma-unsaturated alpha-keto ester 2 (0.12 mmol),DABCO (0.02 mmol) in 1 mL H2O were stirred at room temperature. After stirringfor the indicated time, the mixture was extracted with ethyl acetate. The combinedorganic phase was dried over Na2SO4 and concentrated in vacuo. The residue wasfurther purified by washing with PE/EA to afford the desired products.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Methylindolin-2-one, its application will become more common.

Reference:
Article; Han, Man-Yi; Pan, Ping; Sheng, Fei-Fei; Synlett; vol. 28; 11; (2017); p. 1378 – 1382;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 3484-35-3,Some common heterocyclic compound, 3484-35-3, name is 5-Methylindolin-2-one, molecular formula is C9H9NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Equimolar quantity of 5-substituted-1H-indolin-2-ones and 2-(4-formylphenoxy)-N-substituted-phenyl-acetamide was taken into round bottom flask containing 50 mL of methanol, followed by 2-3 drops of piperidine. The reaction mixture was refluxed for 1-4 h or till the end of reaction as confirmed by TLC. Then, it was cooled to room temperature and, the solution was filtered. The obtained residue was recrystallized by using dimethylformamide and ethanol.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Methylindolin-2-one, its application will become more common.

Reference:
Article; Bhadauria, Vivek Singh; Sravanthi, Vishnu; Kumar, Sujeet; Das, Debajyoti; De Clercq, Erik; Schols, Dominique; Tokuda, Harukuni; Karki, Subhas S.; Acta poloniae pharmaceutica; vol. 74; 1; (2017); p. 137 – 145;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3484-35-3, name is 5-Methylindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 5-Methylindolin-2-one

General procedure: To a 25 mL round bottomed flask was added different substituted oxindoles 8 (0.2 mmol, 1.0 equiv.) and bromoethylsulfonium salt 9 (132.99 mg, 0.3 mmol, 1.5 equiv.), DMF (2 mL). The mixture was stirred at room temperature for 5min and Et3N (61.88 mg, 0.6 mmol, 3.0 equiv.) was added into reaction system. The mixture was stirred for 6h at room temperature until the reaction completed, quenched with saturated ammonium chloride solution (5 mL), and was extracted with EtOAc (3¡Á30 mL). The combined organic layer washed with H2O (2¡Á10 mL), dried with anhydrous sodium sulfate. After concentration, product was purified using column chromatography on silica gel with suitable eluent.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3484-35-3.

Reference:
Article; Qin, Hui; Miao, Yuanyuan; Zhang, Ke; Xu, Jian; Sun, Haopeng; Liu, Wenyuan; Feng, Feng; Qu, Wei; Tetrahedron; vol. 74; 47; (2018); p. 6809 – 6814;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem