Category: 317-20-4

Reference of 317-20-4,Some common heterocyclic compound, 317-20-4, name is 7-Fluoroisatin, molecular formula is C8H4FNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(E) -N-Benzyl-2-nitro-N- (p-tolyl) ethane- 1,1-diamine (1 milliliter(1 mmol)) and 7-fluoroindoline-2,3-dione (1 mmol) were added, toluene (15 ml) and trifluoroacetic acidUnder stirring, the mixture was heated to 110 C and refluxed for 14 hours. TLC monitoring reaction until the point of complete disappearance of raw materials, the reaction solutionExtraction was performed by adding 50 ml of ethyl acetate and 50 ml of saturated sodium chloride aqueous solution, the organic layer was dried over anhydrous Na2SO4,The dried organic phase was concentrated to dryness under reduced pressure, and then 3 ml of acetone and 4 g of 100-200 mesh siliconStir the plastic, vacuum evaporated to dryness, the sample was separated with a petroleum ether / ethyl acetate = 7: 1 eluent silica gel column dried to obtain redN-Benzyl-8-fluoro-3-nitro-2- (p-tolylamino) quinoline-4-carboxamide (Compound 40) was obtained in 65% yield.

The synthetic route of 317-20-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Yunnan University; Yan Shengjiao; Wang Baoqu; Lin Jun; (25 pag.)CN107522659; (2017); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

317-20-4, name is 7-Fluoroisatin, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. name: 7-Fluoroisatin

General procedure: In a 25 mL round bottom flask, isatins 1 (1 mmol), 3-phenylisoxazol-5(4H)-one 2 (1 mmol) or 3-ethylisoxazol-5(4H)-one 7 (1 mmol), pyrazol-5-amine 3 (1 mmol) or 6-aminopyrimidine-2,4-(1H,3H)-dione 5 (1 mmol), and Amberlyst-15 (100 mg) were stirred in CH3OH (5.0 mL) at 80 C. When the reaction was completed (detected by TLC), the spherical catalyst was separated by a sieve at once under hot condition. Then, the reaction mixture was cooled to room temperature, and solid precipitation occurred. After filtration, the crude product was recrystallized from EtOH and DMF to give pure compound.

The synthetic route of 317-20-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Niu, Qingqing; Xi, Junhua; Li, Lei; Li, Li; Pan, Chengli; Lan, Meijun; Rong, Liangce; Tetrahedron Letters; vol. 60; 43; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 317-20-4, name is 7-Fluoroisatin, molecular formula is C8H4FNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C8H4FNO2

General procedure: To a pyrex reaction vessel containing a solution of isatin 1a (147 mg, 1.0 mmoL) and NaAuCl4.2H2O (7.95 mg, 2 mol%) in EtOH (1 mL) was added 4-hydroxycoumarin 2 (324 mg, 2.0 mmoL). The resulting mixture was stirred at 40 C for 15 min under microwave irradiation (power level of 200 W). After completion of the reaction as evidenced by TLC, the mixture was cooled to room temperature and poured into ice-cold water (10 mL). The solid obtained was collected by filtration and washed with copious amount of cold water and dried under vacuum at 40 oC for 15 min to afford 251 mg of analytically pure product 3a.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 317-20-4, its application will become more common.

Reference:
Article; Parthasarathy; Praveen, Chandrasekar; Jeyaveeran; Prince; Bioorganic and Medicinal Chemistry Letters; vol. 26; 17; (2016); p. 4310 – 4317;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 317-20-4, name is 7-Fluoroisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Formula: C8H4FNO2

General procedure: In a 25 mL round bottom flask, isatins 1 (1 mmol), 3-phenylisoxazol-5(4H)-one 2 (1 mmol) or 3-ethylisoxazol-5(4H)-one 7 (1 mmol), pyrazol-5-amine 3 (1 mmol) or 6-aminopyrimidine-2,4-(1H,3H)-dione 5 (1 mmol), and Amberlyst-15 (100 mg) were stirred in CH3OH (5.0 mL) at 80 C. When the reaction was completed (detected by TLC), the spherical catalyst was separated by a sieve at once under hot condition. Then, the reaction mixture was cooled to room temperature, and solid precipitation occurred. After filtration, the crude product was recrystallized from EtOH and DMF to give pure compound.

The synthetic route of 317-20-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Niu, Qingqing; Xi, Junhua; Li, Lei; Li, Li; Pan, Chengli; Lan, Meijun; Rong, Liangce; Tetrahedron Letters; vol. 60; 43; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 317-20-4 as follows. SDS of cas: 317-20-4

General procedure: Isatins (1a-j, 3.0 g), hydrazine hydrate (80%, 13 mL) and water (13 mL) were added to a flask equipped with a thermometer with vigorous stirring. The reaction mixture was kept at 140 C in an oil bath for 6 h before being cooled to r.t., when hydrochloric acid (2.0 mol L-1) was added to bring the pH to pH 2. The reaction mixture was stirred at r.t. for 12 h. Compounds 2a-j were obtained by filtering under vacuum and recrystallisation from absolute ethanol.

According to the analysis of related databases, 317-20-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Zhang, Chao; Xu, Juan; Zhao, Xinyu; Kang, Congmin; Journal of Chemical Research; vol. 41; 9; (2017); p. 537 – 540;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 317-20-4, name is 7-Fluoroisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 317-20-4, Formula: C8H4FNO2

General procedure: A mixture of isatins 1 (1 mmol), substituted 1H-pyrazol-5-amine 2 (1 mmol), 6-aminopyrimidine-2,4(1H,3H)-dione 3 or 6-amino-1,3-dimethylpyrimidine-2,4(1H,3H)-dione 5 (1 mmol), H2O(6 mL), and HOAc (2 mL) was placed in a 25-mL flask andstirred at 90 C (monitored by thin layer chromatography (TLC)) for about 7 h. Afterreaction completion, the mixture was cooled to room temperature and the precipitateobtained by filtration. Compounds 4 or 6 were further purified by recrystallizationfrom DMF.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 7-Fluoroisatin, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Dai, Lei; Mao, Kaimin; Pan, Zhengbing; Rong, Liangce; Research on Chemical Intermediates; vol. 45; 2; (2019); p. 769 – 788;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 317-20-4,Some common heterocyclic compound, 317-20-4, name is 7-Fluoroisatin, molecular formula is C8H4FNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

7-Fluoroisatin (1 mmol) was added to the microwave reaction tube,4-hydroxycoumarin (1.1 mmol),Tetrabutylammonium chloride (0.1 mmol) and water (4 mL),Microwave power 400W,60 radiation 15min,Stop microwave radiation,Cool to room temperature,Vacuum suction filtration,The filter cake was washed with ice-ethanol (0.5 ml)Drying under reduced pressure,A white solid,Yield 94%

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 7-Fluoroisatin, its application will become more common.

Reference:
Patent; Zunyi Medical College; Zhang Lei; Wang Jing; Liu Lai; Zheng Chengyue; Wang Yang; (4 pag.)CN107098888; (2017); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 317-20-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 317-20-4 name is 7-Fluoroisatin, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Step 1a: Preparation of 7-fluoro-1-methyl-1H-indole-2,3-dione (6) 7-Fluoro-1H-indole-2,3-dione (5, prepared according to the method of Gassman as described in U.S. Pat. No. 4,188,325, 3.00 g, 0.182 mol), iodomethane (3.40 ml, 0.545 mol) and potassium carbonate (4.92 g, 0.0363 mol) in DMF (15 ml) are stirred at room temperature for 1 hour. The reaction mixture is diluted with cold water and the resulting precipitate filtered and dried to give the title compound as a solid. HPLC r.t. 4.01 min; MS for C9H6FNO2 m/z 180.0 (M+H)+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 7-Fluoroisatin, and friends who are interested can also refer to it.

Reference:
Patent; Josyula, Vara Prasad Venkata Nagendra; Gordeev, Mikhail; Luehr, Gary; US2006/229349; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 317-20-4, These common heterocyclic compound, 317-20-4, name is 7-Fluoroisatin, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Is added to the reactor 132 mg (0.8 mmol) 7 – fluoro – isatin and 215.1 mg (0.96 mmol) 1, 3 – diphenyl – 1, 3 – c diketone, add 50 ml toluene and 5 ml DMF as the reaction solvent, adding 1 ml H2O2And the catalytic amount of the strong acid ion resin D001 as catalyst, electric jacket heated to 110 C, magnetic stirring reflux reaction for 8.5 hours. Thin-layer chromatographic trace to after the reaction is complete, evaporating the solvent under reduced pressure,, the resulting mixture by silica gel column chromatography separation and purification, drying to obtain the target compound 190.6 mg, total yield 64.2%.

Statistics shows that 7-Fluoroisatin is playing an increasingly important role. we look forward to future research findings about 317-20-4.

Reference:
Patent; Shaanxi University of Science and Technology; Liang Chengyuan; Tian Danni; Jia Minyi; Wang Xuechuan; Dong Hao; Wang Qiang; (12 pag.)CN108558895; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

The chemical industry reduces the impact on the environment during synthesis 317-20-4, name is 7-Fluoroisatin, I believe this compound will play a more active role in future production and life. 317-20-4

EXAMPLES Example 1 Preparation of 7-Fluoro-1,3-dihydroindol-2-one; To a mixture of 7-fluoro-1H-indole-2,3-dione (100 g, 0.606 mol) in ethylene glycol (500 mL) was added an aqueous hydrazine solution (54% wt, 73 g, 1.21 mol) dropwise over 30 minutes. The mixture was heated to 120 C. and stirred for 6 hours. The mixture was cooled to room temperature and water (500 mL) was added. Concentrated hydrochloric acid (HCl; 60 mL) was added, the mixture was warmed to about 35 to about 40 C., and the mixture was stirred for 1 hour. The mixture was then cooled to about 0 to about 5 C. The solid compound was filtered, washed with cold water and dried at 55 C. under vacuum to give an off-white solid (76 g) in 83% yield with 96% HPLC purity.

The chemical industry reduces the impact on the environment during synthesis 317-20-4. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Wyeth; US2007/27327; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem