Category: 317-20-4

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 317-20-4, name is 7-Fluoroisatin, A new synthetic method of this compound is introduced below., Formula: C8H4FNO2

198 mg (1.2 mmol) 7-fluoroisatin, 144.1 mg (1.44 mmol) 2,4-pentanedione, 50 mL THF and 5 mL DMF as solvent, 1 mL H2O2, and 14.5 mg ZnCl2 as catalyst were added to a 100 mL round flask. The mixture was stirred and heated at 85 C. for 12 hours. The reaction was monitored with TLC. When TLC indicated that reaction was complete, heating was removed. The reaction mixture was concentrated, filtered, and washed with THF to obtain 175.5 mg desired product (compound 9), a yield of 59.2%. 1H-NMR (300 MHz, DMSO-d6) delta (ppm): 10.95 (1H, s), 7.59 (1H, d), 6.89 (1H, d), 6.75 (1H, t), 2.38 (3H, s), 2.24 (3H, s); 13C-NMR (75 MHz, DMSO-d6) delta (ppm): 164.2, 161.1, 153.6, 148.8, 129.9, 126.3, 117.4, 109.9, 106.3, 92.5, 23.9, 11.2; MS (ESI) for (M+H)+: 248.1.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SHAANXI UNIVERSITY OF SCIENCE AND TECHNOLOGY; Liang, Chengyuan; Tian, Danni; Jia, Minyi; (11 pag.)US10035808; (2018); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 317-20-4, name is 7-Fluoroisatin, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 317-20-4

General procedure: The mixture of isatin (1 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one (1 mmol), 1,2-diarylethan-1-one, 2,3-dihydroinden-1-one (1 mmol) or 3,4-dihydronaphthalen-1(2H)-one (1 mmol), H2O (6 mL), HOAc (2 mL) was put in a reaction flask under 90 C about 5-7 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be isolated out at same time. Then, compound 4 was recrystallized from DMF, however, the pure products of 6 and 8 were filtered from water, dried, without further recrystallization.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 317-20-4.

Reference:
Article; Wang, Zhansheng; Gao, Lingli; Xu, Zhongyun; Ling, Zhi; Qin, Yaqi; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 73; 4; (2017); p. 385 – 394;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

317-20-4, name is 7-Fluoroisatin, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C8H4FNO2

Weigh rapamycin (0.05mmol), isatin 3j (0.10mmol) and rhodium octanoate dimer(0.0005mmo),They were placed in a reaction flask, 2.0 mL of dry dichloromethane was added, and after stirring at room temperature for 5 minutes,Phenyldiazo 2a (0.10 mmol) was weighed and dissolved in dry dichloromethane (1.0 mL), and slowly added dropwise to the reaction system (about 1 hour), and stirring was continued for half an hour.The solvent was removed by rotary evaporation to give a crude product. The rapamycin analog I-j was obtained by column chromatography (eluent: petroleum ether: ethyl acetate = 1:10 to 1:4).The yield was 85%.

The synthetic route of 317-20-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Ha Yao Cihang Pharmaceutical Co., Ltd.; Changsha Tianci Bio-pharmaceutical Technology Co., Ltd.; Changsha Cihang Pharmaceutical Institute Co., Ltd.; Duan Yanwen; Huang Yong; Qiu Lin; Wen Zhongqing; Su Meng; (38 pag.)CN109776571; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 317-20-4, name is 7-Fluoroisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. category: indolines-derivatives

N,N-dimethylformamide (540.0 mL, 6980 mmol, 100 mass%) was added to a 2-L ChemGlass reactor equipped with a mechanical agitator, a temperature probe, and a cooling/heating circulator. Next, 7-fluoroindoline-2,3-dione (135.0 g, 817.6 mmol, 100 mass%) was added at 25 C and dissolved to form a dark red solution. The charging ports and the beaker that contained the 7-fluoroindoline-2,3-dione were washed with N,N-dimethylformamide (135.0 mL, 1750 mmol, 100 mass%) and the rinse solution was poured into the reactor. Next, cesium carbonate 60-80 mesh (203.66 g, 625.05 mmol, 100 mass%) was added portion-wise to the reaction mixture. The addition was exothermic and the temperature of the reaction mixture increased from 20 to 25.5 C. The color of the reaction mixture changed from a dark red solution to a black solution. The reactor jacket temperature was set to 0 C. Next, iodomethane (56.5 mL, 907 mmol, 100 mass%) was added slowly via an additional funnel at ambient temperature, (iodomethane temperature) while maintaining the batch temperature at less than 30 C. Upon stirring, the reaction was exothermic, reaching a temperature of 29.3 C. The batch temperature decreased to 26.3 C after 85% of iodomethane was added, and the reaction mixture turned from black to an orange. After the addition of the iodomethane was completed, the jacket temperature was raised to 25.5 C. The reaction mixture was stirred at 25 C for 2 hrs. The reddish orange-colored reaction mixture was transferred to a 1 L Erlenmeyer flask. The reaction mixture was filtered through a ceramic Buchner funnel with a No.1 Whatman filter paper to remove solid CS2CO3 and other solid by-products. In addition to a light-colored powder, there were yellow to brown colored rod-shaped crystals on top of the cake, which were water soluble. The filtrate was collected in a 2-L Erlenmeyer flask. The solids cake was washed with N,N-dimethylformamide (100.0 mL, 1290 mmol, 100 mass%). The DMF filtrate was collected in a 2-L Erlenmeyer flask. To a separate 5-L ChemGlass reactor was charged water (3000.0 mL, 166530 mmol, 100 mass%). Next, 1.66 g of 7-fluoro-l-methylindoline-2,3-dione was added as seed to the water to form an orange colored suspension. The DMF filtrate was charged to the 5-L reactor slowly while maintaining the batch temp, at less than 29 C over a period of 60 min. Stirring was maintained at 290 rpm. The orange solids precipitated instantly. The 2-L Erlenmeyer flask was rinsed with N,N-dimethylformamide (55.0 mL, 711 mmol, 100 mass%) and charged to the 5-L reactor. The slurry was cooled to 25 C and agitated at 200 rpm for 12 hrs. The mixture remained as a bright orange-colored suspension. The slurry was filtered over a No. l Whatman filter paper in a 9 cm diameter ceramic Buchner funnel to a 4L Erlenmeyer flask to provide a bright orange-colored cake. The cake was washed with 1200 mL of water via rinsing the 5000 mL reactor (400 mL x 2), followed by 300 mL of deionized water introduced directly on the orange cake. The wet cake was dried under suction for 40 min at ambient temperature until liquid was not observed to be dripping from the cake. The cake was introduced into a vacuum oven (800 mbar) with nitrogen sweeping at ambient temperature for 1 hr, at 40-45 C for overnight, and at 25 C for 1 day to provide 7-fluoro-l-methylindoline-2,3-dione (Q, 130.02 g, 725.76 mmol, 100 mass%, 88.77% yield) as a bright orange-colored solid. NMR (400 MHz, DMSO- de) delta 7.57 (ddd, J=12.0, 8.5, 1.0 Hz, 1H), 7.40 (dd, J=7.3, 1.0 Hz, 1H), 7.12 (ddd, J=8.5, 7.5, 4.0 Hz, 1H), 3.29 (d, J=3.0 Hz, 3H). 13C NMR (101 MHz, DMSO-de) delta 182.3, 158.2, 148.8, 146.4, 137.2, 125.9, 124.3, 120.6, 28.7.

The synthetic route of 317-20-4 has been constantly updated, and we look forward to future research findings.

Reference of 317-20-4, These common heterocyclic compound, 317-20-4, name is 7-Fluoroisatin, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of isatin (0.15 g, 1 mmol), 5,5-dimethylcyclohexane-dione (0.14 g, 1 mmol), barbituric (0.13 g, 1 mmol) in gluconic acid aqueous solution (3 ml) was stirred at 100 C. The reaction progress was monitored by thin-layer chromatography. After completion of the reaction, the reaction mixture was cooled to room temperature. Then, the precipitated product was filtered and washed with water. The crude product was crystallized from ethanol to give 4a.

The synthetic route of 317-20-4 has been constantly updated, and we look forward to future research findings.

Related Products of 317-20-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 317-20-4, name is 7-Fluoroisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: The mixture of isatin (1 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one (1 mmol), 1,2-diarylethan-1-one, 2,3-dihydroinden-1-one (1 mmol) or 3,4-dihydronaphthalen-1(2H)-one (1 mmol), H2O (6 mL), HOAc (2 mL) was put in a reaction flask under 90 C about 5-7 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be isolated out at same time. Then, compound 4 was recrystallized from DMF, however, the pure products of 6 and 8 were filtered from water, dried, without further recrystallization.

The synthetic route of 7-Fluoroisatin has been constantly updated, and we look forward to future research findings.

317-20-4, name is 7-Fluoroisatin, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Computed Properties of C8H4FNO2

Is added to the reactor 198 mg (1.2 mmol) 7 – fluoro – isatin and 144.1 mg (1.44 mmol) 2, 4 – pentanedionato, add 50 ml tetrahydrofuran and 5 ml DMF as the reaction solvent, adding 1 ml H2O2And 14.5 mg ZnCl2As the catalyst, the electric jacket is heated to 85 C, magnetic stirring reflux reaction for 12 hours. Thin-layer chromatographic trace to after the reaction is complete, evaporating the solvent under reduced pressure, the filter cake is tetrahydrofuran washing, drying to obtain the target compound 175.5 mg, total yield 59.2%.

The synthetic route of 317-20-4 has been constantly updated, and we look forward to future research findings.

317-20-4, name is 7-Fluoroisatin, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: indolines-derivatives

Preparation 5. Synthesis of 8-F-4-CO2H-quinoline: To a solution of 7-fluoroisatin (500 mg, 3.03 mmol) in water (10 mL) at the room temperature were added aqueous NaOH solution (2.5 mL, SM, 12.5 mmol) and sodium pyruvate (400 mg, 3.66 mmol), and it?s then placed in a microwavereactor (CEM discover 5) at 110C for 10 mm. The resulting solution was cooled down and acidified to pH 2, and the dark solid was then collected. A suspension ofsolid in water (2 mL) was then placed in a 10 mL microwave tube followed by stirring at 170C (or 280 psi) in a microwave reactor for 5 mm. The desired product (brown solid, 340 mg, 60% yield) was then filtered off and collected. LRMS (M+Hj m/z: cacld 192.04, found 192.16.

The synthetic route of 317-20-4 has been constantly updated, and we look forward to future research findings.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 317-20-4, name is 7-Fluoroisatin, A new synthetic method of this compound is introduced below., Recommanded Product: 317-20-4

STEP C: 2-amino-3-fluoro-benzoic acid A mixture of 19.27 g of the product of Step B and 197 ml of 10N sodium hydroxide solution was heated to 70 C. with stirring and heating was ceased to add 36.5 ml of 30% hydrogen peroxide over 20 minutes during which the temperature rose to 80 C. and descended to 70 C. At the end of the addition, the mixture was heated to 80 C. and held there for 10 minutes and then was cooled during which a mass formed. The latter was added to 200 ml of water with stirring and the pH was adjusted to 1 by addition of concentrated hydrochloric acid at a temperature less than 20 C. The mixture was stirred for 90 minutes and was vacuum filtered. The product was empasted twice with iced water and dried under reduced pressure at 70 C. The product was crystallized from 100 ml of a 1-1 ethanol-water mixture and 3 ml of acetic acid. The mixture was iced for one hour and was vacuum filtered. The product was empasted with a 1-1 ethanol-water mixture and dried at 70 C. under reduced pressure to obtain 14.8 g of 2-amino-3-fluoro-benzoic acid melting at 188 C.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Roussel Uclaf; US4736033; (1988); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 317-20-4, name is 7-Fluoroisatin, molecular formula is C8H4FNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C8H4FNO2

General procedure: Sulfonated-beta-cyclodextrin (beta-CD-SO3H) (76 mg, 0.06 mmol) was dissolved in water (5 mL) at RT by stirring to get the clear solution in 50 mL round bottom ask. Further, isatin 2 (0.31 mmol) and tryptamine 1a/isotryptamine 1b (0.31 mmol) were added to the solution under constant stirring and mixture was heated at 80 C for 8-12 h. The progress of the reaction was monitored by TLC. After completion of reaction, it was cooled to room temperature, water was added to it. The aqueous phase was extracted with ethylacetate. The organic extracts were combined, washed with brine and dried over sodium sulfate. The solvent was evaporated in vacuo and the crude product obtained was puried by column chromatography using chloroform/methanol (99:1) as an eluent furnishing the product. The spectral and analytical data of all the reported products is consistent with the previous (6c,d,f) reports.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 317-20-4, its application will become more common.

Reference:
Article; Urmode, Tukaram D.; Dawange, Monali A.; Shinde, Vaishali S.; Kusurkar, Radhika S.; Tetrahedron; vol. 73; 30; (2017); p. 4348 – 4354;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem