Category: 20780-72-7

Some common heterocyclic compound, 20780-72-7, name is 4-Bromoisatin, molecular formula is C8H4BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 4-Bromoisatin

General procedure: To mixture of isatins (1 mmol), malononitrile (1 mmol), and dimedone or 4-hydroxycoumarin or barbituric acids (1 mmol) in ethanol (4 mL), 5mg of Fe3O4APTPOSS MNPs added as the catalyst, and the mixture was stirred for an appropriate time at room temperature (Table 2). The reaction was monitored by TLC. After completion of the reaction, precipitate was filtered and dried in a drying oven to furnish 2-aminopyrano-3-carbonitriles.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 20780-72-7, its application will become more common.

Reference:
Article; Safaei-Ghomi, Javad; Nazemzadeh, Seyed Hadi; Shahbazi-Alavi, Hossein; Catalysis Communications; vol. 86; (2016); p. 14 – 18;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 20780-72-7,Some common heterocyclic compound, 20780-72-7, name is 4-Bromoisatin, molecular formula is C8H4BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of 1.0 g (4.4 mmol) of 4-bromoindole diketone,Methyl acrylate (0.46 g, 5.3 mmol)PdCl2 (PPh3) 20.15 g (0.22 mmol),K3PO41.6 g (6.2 mmol),Into the microwave reaction flask,Add 5 mL of DMF,Argon protection,And reacted at 145 ° C for 30 min in a microwave reactor.TLC detection reaction is complete,The reaction solution was washed three times with 100 mL of saturated brine,Extracted with dichloromethane,Combined organic phase,Dried over anhydrous sodium sulfate and purified by silica gel column chromatography using developing solvent petroleum ether: ethyl acetate = 5: 1-1: 1,200-300 mesh,4-methyl acrylate indole diketone 0.65 g, yield 64percent.

The synthetic route of 20780-72-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Tianjin Kunjian Bio-pharmaceutical Co., Ltd.; Yu Peng; Han Kailin; Mao Huihua; Qiu Dongxu; (8 pag.)CN104370799; (2017); B;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 20780-72-7, name is 4-Bromoisatin, This compound has unique chemical properties. The synthetic route is as follows., name: 4-Bromoisatin

Into a 250-mL round-bottom flask, was placed 4-bromo-2,3-dihydro-1H-indole-2,3- dione (2.25 g, 9.95 mmol, 1.00 equiv), N,N-dimethylformamide (50 mL), sodium hydride (480 mg, 12.00 mmol, 2.00 equiv), and iodomethane (1.7 g, 11.98 mmol, 1.20 equiv). The resulting solution was stirred for 1 h at room temperature in a water/ice bath. The resulting solution was diluted with 800 mL of EA then washed with 4×50 mL of brine. The organic layer was dried over anhydrous sodium sulfate and concentrated under vacuum. This resulted in 2 g (84percent) of 4-bromo-1-methyl-2,3-dihydro-1H-indole-2,3-dione as a red solid

According to the analysis of related databases, 20780-72-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; LYCERA CORPORATION; AICHER, Thomas, Daniel; PADILLA, Fernando; TOOGOOD, Peter, L.; CHEN, Shoujun; (331 pag.)WO2016/138335; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 20780-72-7, name is 4-Bromoisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 20780-72-7, Quality Control of 4-Bromoisatin

General procedure: To a solution of isatin 1 (1 mmol) in toluene (5 mL) was added the solution of trialkyl/aryl Al 2 (2 mmol, 2 M in toluene) dropwise at RT. Then the mixture was heated at 70 °C and stirred for additional 3?3.5 h (see Table 2). The reaction was monitored by TLC. After completion of the reaction, toluene was evaporated and extracted with ethyl acetate (3 × 5 mL). The combined organic layer was washed with brine solution, dried over anhydrous Na2SO4, and concentrated under reduced pressure (rotary evaporator). The crude products were purified by silica gel column chromatography using ethyl acetate/hexanes (4:1?1:1). All compounds were characterized by (MP, NMR, Mass, and IR) spectral data.18

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Bromoisatin, and friends who are interested can also refer to it.

Reference:
Article; Kumar, G. Santosh; Ramesh, Palakuri; Kumar, A. Sanjeeva; Swetha; Meshram; Tetrahedron Letters; vol. 54; 37; (2013); p. 5048 – 5051;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 20780-72-7, The chemical industry reduces the impact on the environment during synthesis 20780-72-7, name is 4-Bromoisatin, I believe this compound will play a more active role in future production and life.

To a solution of 4-bromoisatin (8.94 g, 39.5 mmol) in anhydrous N, N- dimethylformamide (100 ml_) was added sodium hydride (3.34 g, 86.9 mmol, 60percent dispersion in mineral oil) in portions at 0 0C. The brown reaction mixture was stirred for 30 min followed by the addition of a solution of 2-(bromomethyl)pyridine hydrobromide (10.0 g, 39.5 mmol) neutralized with sodium hydride (1.52 g, 39.5 mmol, 60percent dispersion in mineral oil) in Lambda/,Lambda/-dimethylformamide at 0 0C. The reaction mixture was stirred for 16 h and quenched with water (100 ml_). The reaction mixture was extracted with diethyl ether (3 x 100 mL) and the aqueous layer was extracted with ethyl acetate (3 x 100 mL). The combined organic layers was washed with water (5 x 200 mL), dried over anhydrous sodium sulfate and filtered. The filtrate was concentrated in vacuo to dryness. The residue was triturated with ether to afford the title compound (10.6 g,85percent) as a brown solid: 1H NMR (300 MHz, DMSO-d6) delta 8.53 (d, 1 H), 7.67 (t, 1 H), 7.30 (t, 2H), 7.25-7.19 (m, 2H), 6.94 (d, 1H), 5.04 (s, 2H); 13C NMR (75 MHz, DMSO-d6) delta 180.5, 157.3, 154.2, 152.3, 149.5, 138.4, 137.5, 128.6, 123.3, 122.3, 121.5, 116.4, 110.3, 45.8.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Bromoisatin, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; XENON PHARMACEUTICALS INC.; WO2006/113864; (2006); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 20780-72-7,Some common heterocyclic compound, 20780-72-7, name is 4-Bromoisatin, molecular formula is C8H4BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To mixture of isatins (1 mmol), malononitrile (1 mmol), and dimedone or 4-hydroxycoumarin or barbituric acids (1 mmol) in ethanol (4 mL), 5mg of Fe3O4APTPOSS MNPs added as the catalyst, and the mixture was stirred for an appropriate time at room temperature (Table 2). The reaction was monitored by TLC. After completion of the reaction, precipitate was filtered and dried in a drying oven to furnish 2-aminopyrano-3-carbonitriles.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Bromoisatin, its application will become more common.

Reference:
Article; Safaei-Ghomi, Javad; Nazemzadeh, Seyed Hadi; Shahbazi-Alavi, Hossein; Catalysis Communications; vol. 86; (2016); p. 14 – 18;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 20780-72-7, name is 4-Bromoisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C8H4BrNO2

General procedure: TiCl4 (0.7 mL, 6 mmol)was added to a stirred suspension of Zn powder (0.78 g, 12 mmol) in freshlydistilled anhydrous THF (15 mL) at room temperature (rt) under a dry N2atmosphere. After completion of the addition, the mixture was refluxed for 2 h.The suspension of the low-valent titanium reagent thus-formed was cooled tort. A solution of isatin or its derivatives 1 or 3 (2 mmol) in THF (10 mL) wasadded dropwise. The mixture was stirred at room temperature for about 5 minunder N2. After this period, the thin layer chromatography (TLC) analysis of themixture showed the reaction completed. The reaction mixture was quenchedwith 3% HCl (15 mL) and extracted with CHCl3 (3 50 mL). The combinedextracts were washed with water (3 50 mL) and dried over anhydrousNa2SO4. After evaporation of the solvent under reduced pressure, the crudeproduct was purified by column chromatography (petroleum ether/ethylacetate = 5:1) to give the pure products 2 or 4.

The synthetic route of 20780-72-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Lin, Wei; Hu, Ming-Hua; Feng, Xian; Fu, Lei; Cao, Cheng-Pao; Huang, Zhi-Bin; Shi, Da-Qing; Tetrahedron Letters; vol. 55; 14; (2014); p. 2238 – 2242;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 20780-72-7, name is 4-Bromoisatin, This compound has unique chemical properties. The synthetic route is as follows., Safety of 4-Bromoisatin

A mixture ofZn power (8.64g, 132.13mmol) and TiCl4 (12.60g, 66.42mmol) in THF (100mL) was stirred at 80 C for 2 hours, then it was cooled to RT, a solution of 4-bromoindoline-2, 3-dione (5.01g, 22.16mmol) in THF (100mL) was added dropwise under N2. After completion of the reaction, Hydrochloric acid solution (100mL, 3M) was added, the mixture was extracted with DCM (50mL3), the organic phase was washed with brine (50mL2), dried over anhydrous Na2SO4, filtered and the solvent was removed under reduced pressure, the residue was purified by column chromatography to afford the compound 9a (2.63g, 56.0%). MS: 212 (M+H) +.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 20780-72-7.

Reference:
Patent; JACOBIO PHARMACEUTICALS CO., LTD.; MA, Cunbo; GAO, Panliang; CHU, Jie; WU, Xinping; WEN, Chunwei; KANG, Di; BAI, Jinlong; PEI, Xiaoyan; (82 pag.)WO2017/211303; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 20780-72-7,Some common heterocyclic compound, 20780-72-7, name is 4-Bromoisatin, molecular formula is C8H4BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a vial containing 5b (12 mg, 0.05 mmol), TFA (11 mg,0.1 mmol) and EtOH (2.0 mL) was added 4-nitrobenzaldehyde (76 mg, 0.50 mmol). The reaction mixture was stirred for 5 min, then cyclohexanone (147 mg, 1.50 mmol) was added. The resulting mixture was stirred at room temperature for 24 h until the reaction was complete by monitoring (TLC). Next, saturated NH4Cl solution and ethyl acetate were added with vigorous stirring. The organic phase was separated, washed with brine, dried over Na2SO4, and concentrated in vacuo. The residue was then purified by column chromatography on silica gel (mixture of ethyl acetate/hexane) to give the corresponding aldol adducts. The anti/syn ratio (diastereoselectivity) and ee values (enantioselectivity) were determinedby HPLC on a chiral column.

The synthetic route of 20780-72-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Li, Lei; Gou, Shaohua; Liu, Fei; Tetrahedron Asymmetry; vol. 25; 2; (2014); p. 193 – 197;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 20780-72-7, name is 4-Bromoisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Product Details of 20780-72-7

General procedure: A solution of 2-nitrobenzamides 1 or bis(2-nitrobenzamides) 4 (1 mmol), isatins 2 or acenaphthylene-1,2-diones 6 (1 mmol), and SnCl2*2H2O (4 mmol) in EtOH (5 mL) was stirred at reflux for 3-5 h. After this period, the TLC analysis of the mixture showed the reaction to be completed. The mixture was quenched with 3percent HCl (10 mL) and filtered to yield a crude product, which was purified by recrystallization from 95percent ethanol and DMF.

The synthetic route of 20780-72-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Hu, Yu; Wang, Man-Man; Chen, Hui; Shi, Da-Qing; Tetrahedron; vol. 67; 48; (2011); p. 9342 – 9346;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem