Category: 2058-74-4

Chemistry graduates have much scope to use their knowledge in a range of research sectors, including roles within chemical engineering, chemical and related industries, healthcare and more. , 2058-74-4

To the solution of Isatin 1a (1 mmol) in water (20 ml)at 60 C was added o-phenylenediamine 2 (1 mmol). The resulting mixture was stirred and beta-cyclodextrin(15 mol%) was added to the solution. The reaction progress was monitored using TLC by mixture of Hexane – EtOAc (6/4). The completion of the reactionas indicated by TLC in UV-chamber and vapour iodine chamber. The reaction mixture was cooled to room temperature and mixture was extracted by ethyl acetate(2 30mL) and dried over anhydrous sodium sulfate.Ethyl acetate removed in vacuum and crude product obtained. To recycle beta-cyclodextrin, acetone was added in the aqueous media, beta-cyclodextrin recovered. Pure product (6H-Indolo[2,3-b]quinoxaline3a) was obtained by silica gel column chromatography(Hexane/EtOAc) = (7/3 – 6/4) as solid.

The chemical industry reduces the impact on the environment during synthesis 2058-74-4. I believe this compound will play a more active role in future production and life.

Reference:
Article; Shivhare, Km Neha; Siddiqui; Supramolecular Chemistry; vol. 31; 1; (2019); p. 52 – 61;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Computed Properties of C9H7NO2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2058-74-4 as follows.

A solution of N-methylisatin (322 mg, 2.0 mmol), indole (234 mg, 2.0 mmol), and K2CO3 (138 mg, 1.0 mmol) in aqueous DMF (H2O/DMF, 2:1, 5.0 mL) was heated to 50 oC for 3 h. After aqueous extractive workup and column chromatographic purification process (n-hexane/EtOAc, 1:1), 3-hydroxy-3-(1H-indol-3-yl)-1-methylindolin-2-one was obtained as a white solid, 440 mg (79%).1-4 To a stirred solution of 3-hydroxy-3-(1H-indol-3-yl)-1-methylindolin-2-one (278 mg, 1.0 mmol) in DMF (3.0 mL) was added t-BuOK (125 mg, 1.1 mmol) and iodomethane (158 mg, 1.1 mmol) successively at 0 oC. The reaction mixture was stirred at room temperature for 2 h. After aqueous extractive workup and column chromatographic purification process (n-hexane/EtOAc, 3:1), 3-hydroxy-1-methyl-3-(1-methyl-1H-indol-3-yl)indolin-2-one was obtained as a white solid, 200 mg (68%).1,4 A solution of 3-hydroxy-1-methyl-3-(1-methyl-1H-indol-3-yl)indolin-2-one (146 mg, 0.5 mmol) and p-cresol (162 mg, 1.5 mmol) in CH2Cl2 (3.0 mL) was stirred at room temperature in the presence of montmorillonite K-10 (438 mg, 300%, w/w) for 2 h. The reaction mixture was filtered through a pad of Celite and washed thoroughly with CH2Cl2. After removal of solvent and column chromatographic purification process (n-hexane/EtOAc, 5:1) 1a was obtained as a white solid, 138 mg (72%).

Keep up to date with our latest articles, reviews, collections & more by following us. You can also keep informed by signing up to our E-Alerts.

Reference:
Note; Seo, Da Young; Lee, Sangku; Min, Beom Kyu; Kim, Jae Nyoung; Bulletin of the Korean Chemical Society; vol. 39; 8; (2018); p. 1011 – 1014;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Chemical research careers are more diverse than they might first appear, as there are many different reasons to conduct research and many possible environments. Reference of 2058-74-4

General procedure: The mixture of the Fe(III)(at)g-C3N4 nanocomposite (70 mg, 0.35 mmol based on Fe(III)) in aqueous media (3 ml) was dispersed for 30 min. Isatin (1 mmol) and indole (2.0 mmol) were added to the mixture and stirred in reflux conditions for an appropriate time. After the reaction was completed, the crude product was extracted with ethyl acetate and dried over anhydrous Na2SO4 followed by evaporation of the solvent. The pure products were achieved by recrystallization in hot ethanol and identified by IR, 1H & 13C NMR spectral data. The nanocomposite was washed with EtOH, dried, and reused for the next run.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 1-Methylisatin.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri; Research on Chemical Intermediates; vol. 44; 11; (2018); p. 6741 – 6751;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

2058-74-4, Researchers are common within chemical engineering and are often tasked with creating and developing new chemical techniques, frequently combining other advanced and emerging scientific areas.

General procedure: A mixture of isatin derivative (1.0mmol), activated methylene (1.0mmol), 1,3-diketones (1.0mmol), and Fe3O4SiO2-imid-PMAn catalyst (0.8mol%) was stirred at 70C in water or irradiated in a microwave oven at 200W for an appropriate period of time as indicated in Table 2. After completion of the reaction, as indicated by TLC, the reaction mixture was diluted with hot ethanol (10mL). The catalyst was removed by using a magnetic field and then the solvent was evaporated and the pure product was obtained by recrystallization from ethanol.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 1-Methylisatin.

Reference:
Article; Esmaeilpour, Mohsen; Javidi, Jaber; Divar, Masoumeh; Journal of Magnetism and Magnetic Materials; vol. 423; (2017); p. 232 – 240;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 2058-74-4,The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research.

General procedure: To a solution of L-proline-melamine complex (3 mol%) in DMSO (2 mL) was added dimedone 0.025 mg (0.178 mmol), malononitrile (1 equiv) and benzaldehyde / isatin (1 equiv) and stirred at room temperature for 1-20 min. After completion of the reaction (monitored by TLC), ethyl acetate was added stirring and continued for another 5 min. The precipitate formed was filtered. Evaporation of solvent gave the crude product which was recrystallized using ethanol to give the pure compound.

We are continuing to develop the new Research Structures and WebCSD systems in response to feedback from you, our user community, so we would love to hear what you think about the enhanced search functionality and any suggestions you might have about 2058-74-4.

Reference:
Article; Nagaraju, Sakkani; Paplal, Banoth; Sathish, Kota; Giri, Santanab; Kashinath, Dhurke; Tetrahedron Letters; vol. 58; 44; (2017); p. 4200 – 4204;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 2058-74-4, name is 1-Methylisatin, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Synthetic Route of 2058-74-4

General procedure: The dicationic ionic liquid 10 (27.03 mg, 10 mol %), was added to a mixture of 1,3-dicarbonyl (1 mmol), isatin (1 mmol), malononitrile (1 mmol), and K2CO3 (13.8 mg, 10 mol %) in water (3 mL). The reaction mixture was stirred at reflux for the appropriate time. After reaction completion (TLC), the reaction mixture was cooled to room temperature and filtered. The filtrate was washed with cool ethanol (3 × 5 mL) to obtain the corresponding 4H-pyran. The crude products were purified by recrystallization from ethanol (95%). To recover 10, the ethanol/water phase was evaporated under reduced pressure and the crude was washed with ethyl acetate (3 × 5 mL) and air dried.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Methylisatin, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Niknam, Khodabakhsh; Khataminejad, Mohsen; Zeyaei, Fariba; Tetrahedron Letters; vol. 57; 3; (2016); p. 361 – 365;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 2058-74-4,Some common heterocyclic compound, 2058-74-4, name is 1-Methylisatin, molecular formula is C9H7NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Isatin 1 (3 mmol), 0.198 g malononitrile (3 mmol),0.420 g dimedone (3 mmol), and 0.025 g sodium acetate(0.3 mmol) were grinded with the pestle in mortar atambient temperature for 15 min. The resulting mixture wasair dried. Crude solid was then put on filter, rinsed withwater (2 9 2 cm3), and dried with water pump.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Methylisatin, its application will become more common.

Reference:
Article; Elinson, Michail N.; Ryzhkov, Fedor V.; Zaimovskaya, Tatiana A.; Egorov, Mikhail P.; Monatshefte fur Chemie; vol. 147; 4; (2016); p. 755 – 760;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 2058-74-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2058-74-4 as follows.

A solution of N-methylisatin (81 mg, 0.5 mmol), phenylacethylene (77 mg, 0.75 mmol), CuI (19 mg, 0.1 mmol), and Cs2CO3 (245 mg, 0.75 mmol) in CH3CN (1.0 mL) was stirred at room temperature for 18 h. After aqueous extractive work up and column chromatographic purification process (CH2Cl2/EtOAc, 15:1) 1a was obtained as a pale yellow soild, 81 mg (61%). Other compounds were prepared similarly, and the spectroscopic data of unknown compounds 1b, 1d, and 1e are as follows.

According to the analysis of related databases, 2058-74-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Roh, Hwa Jung; Lim, Jin Woo; Ryu, Ji Yeon; Lee, Junseong; Kim, Jae Nyoung; Tetrahedron Letters; vol. 57; 38; (2016); p. 4280 – 4283;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2058-74-4, name is 1-Methylisatin belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Formula: C9H7NO2

General procedure: To an 8 mL dram vial was added iodobenzene diacetate (0.6 mmol, 1.5 equiv), arene (0.4 mmol,1 eq.), dichloroethane (2 mL), then 1 M hydrochloric acid (2 mL, 5 equiv). The solution wasallowed to stir (1000 rpm) at 50 C for the indicated amount of time. After which the solution waswashed with saturated sodium bicarbonate, followed by saturated sodium thiosulfate andconcentrated. The crude mixture was then purified by column chromatography.

The synthetic route of 2058-74-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Fosu, Stacy C.; Hambira, Chido M.; Chen, Andrew D.; Fuchs, James R.; Nagib, David A.; Chem; vol. 5; 2; (2019); p. 417 – 428;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 2058-74-4, name is 1-Methylisatin, molecular formula is C9H7NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C9H7NO2

General procedure: To a mixture of isatin (1 equiv.) and phenyl acetylene (1.2 equiv.) in water (3 mL), CuWO4 (10 mol%) and DABCO (40 mol%) were added at room temperature and the mixture was heated at 60 C for 2 to 5 h. After completion of reaction (monitoring by TLC) mixture was cooled to room temperature and extracted with EtOAc (2×10 mL). The organic layers were washed with brine, dried using sodium sulfate. Evaporation of the solvent gave the crude product which was purified by silica gel column chromatography to give 3-hydroxy-3-(phenylethynyl)indolin-2-ones (3a-3u).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2058-74-4, its application will become more common.

Reference:
Article; Paplal, Banoth; Sathish, Kota; Nagaraju, Sakkani; Kashinath, Dhurke; Catalysis Communications; vol. 135; (2020);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem