Category: 1914-02-9

Academic researchers, R&D teams, teachers, students, policy makers and the media all rely on us to share knowledge that is reliable, accurate and cutting-edge. Computed Properties of C10H13N

A mixture of 3,3-dimethylindoline (5s, 103 mg, 0.700 mmol), potassium carbonate (288 mg,2.084 mmol), and 2-bromopropanenitrile (303 muL, 3.506 mmol) in 2 mL CH3CN was stirred at 80C overnight. The mixture was concentrated and purified by preparative HPLC. Fractions containing productwere partly concentrated and residue was extracted with 1 M NaHCO3 and CH2Cl2. Organic phases weredried over MgSO4, filtered, and concentrated to give 2-(3,3-dimethylindolin-1-yl)propanenitrile (105mg). LCMS m/z = 201.2 [M+1]+; 1H NMR (400 MHz, CDCl3) delta ppm 1.26 (s, 3H), 1.40 (s, 3H), 1.63 (d, J = 7.3Hz, 3H), 3.05 (d, 1H, J = 8.2 Hz), 3.25 (d, 1H, J = 8.2 Hz), 4.57 (q, 1 H, J = 7.3 Hz), 6.57 (d, 1H, J = 7.9 Hz),6.83-6.87 (m, 1H), 7.06 (dd, 1H, J1 =7.4 Hz, J2 = 0.8 Hz), 7.12-7.16 (m, 1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Dang, Huong; Feichtinger, Konrad; Frazer, John; Grottick, Andrew J.; Kasem, Michelle; Le, Minh; Lehman, Juerg; Morgan, Michael E.; Ren, Albert; Sage, Carleton R.; Schrader, Thomas O.; Semple, Graeme; Unett, David J.; Whelan, Kevin T.; Wong, Amy; Zhu, Xiuwen; Bioorganic and medicinal chemistry letters; (2020);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 1914-02-9, name is 3,3-Dimethylindoline, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1914-02-9, Application In Synthesis of 3,3-Dimethylindoline

3,3-DimethyM -(1 -methyl-4-piperidinyl)-2,3-dihydro-1 H-indole (D5) To a solution of 3,3-dimethyl-2,3-dihydro-1 /-/-indole (500 mg, 3.4 mmol) in acetic acid (5 ml) under an argon atmosphere was added 1-methyl-4-piperidinone (423 mg, 3.74 mmol) and after 5 minutes NaBH(OAc)3 (1.08 g, 5.1 mmol) was added in one portion. After 0.5 hours the mixture was diluted with water, basified with NaOH (pellets) until pH ca. 10 and extracted with Et2O. The organic phase was separated and dried over MgSO4. The solution was filtered and concentrated to afford 3,3-dimethyl-1-(1-methyl-4-piperidinyl)- 2,3-dihydro-1 H-indole (D5) in 94% yield (780 mg).1H-NMR (CDCI3): delta 1.27 (6H, s), 1.74 (4H, m), 2.04 (2H, dt), 2.30 (3H, s), 2.95 (2H1 d), 3.13 (2H, s), 3.35 (1 H, m), 6.40 (1 H, d, J=7.6 Hz), 6.63 (1 H, t, J=7.6 Hz), 6.98 (1 H, d, J=7.6 Hz), 7.04 (1H, t, J=7.6 Hz). MS: m/z (M+H)+ 245, C16H24N2 requires 244

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; GLAXO GROUP LIMITED; WO2006/38006; (2006); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 1914-02-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1914-02-9, name is 3,3-Dimethylindoline belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To a solution of (S)-2-((tert-butoxycarbonyl)amino)propanoic acid (133 mg, 0.703 mmol) in 7 mL DMF, triethylamine (127 mu^ 0.912 mmol) and HATU (319 mg, 0.839 mmol) were added. After stirring at room temperature for 5 min, 3,3-dimethylindoline (97.2 mg, 0.660 mmol) was added. After stirring at room temperature for 4 h, the mixture was extracted with AcOEt and brine. The organic phase was dried over MgS04, filtered, and concentrated. The residue was purified by silica gel column chromatography to give (S)-tert-butyl (l-(3,3-dimethylindolin-l-yl)-l-oxopropan-2-yl)carbamate (204 mg) as a white solid. LCMS m/z = 319.4 [M+l]+; NMR (400 MHz, CDC13) delta ppm 1.358 (s, 3H), 1.364 (s, 3H), 1.40 (d, J = 6.8 Hz, 3H), 1.45 (s, 9H), 3.78 (d, J = 10.0 Hz, 1H), 4.00 (d, J = 10.0 Hz, 1H), 4.54-4.61 (m, 1H), 5.46 (d, J = 8.5 Hz, 1H), 7.07-7.10 (m, 1H), 7.15-7.16 (m, 1H), 7.20-7.24 (m, 1H), 8.17 (d, J = 8.1 Hz, 1H).

The synthetic route of 3,3-Dimethylindoline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARENA PHARMACEUTICALS, INC.; SEMPLE, Graeme; BEHAN, Dominic P.; FEICHTINGER, Konrad; GLICKLICH, Alan; GROTTICK, Andrew J.; KAM, Maria Matilde Sanchez; KASEM, Michelle; LEHMANN, Juerg; REN, Albert S.; SCHRADER, Thomas O.; SHANAHAN, William R.; WONG, Amy Siu-Ting; ZHU, Xiuwen; WO2015/66344; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1914-02-9, name is 3,3-Dimethylindoline, A new synthetic method of this compound is introduced below., COA of Formula: C10H13N

General procedure: A mixture of 24.5 mg (0.18 mmol) 1,2,3,4-tetrahydroquinoline, 37.3 mg (0.188 mmol) 1-adamatanecarbonyl chloride and 44.4 mg (0.34 mmol) DIPEA in 1 mL DCM was shaken at room temperature for 4 h. The mixture was evaporated, dissolved in DMF and subjected to column chromatography on reversed phase eluting with a gradient formed from acetonitrile, water and formic acid to yield after evaporation of the product containing fractions 34.9 mg (64%) of the title compound as white solid.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Nettekoven, Matthias; Fingerle, Juergen; Grether, Uwe; Gruener, Sabine; Kimbara, Atsushi; Puellmann, Bernd; Rogers-Evans, Mark; Roever, Stephan; Schuler, Franz; Schulz-Gasch, Tanja; Ullmer, Christoph; Bioorganic and Medicinal Chemistry Letters; vol. 23; 5; (2013); p. 1177 – 1181;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 1914-02-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1914-02-9, name is 3,3-Dimethylindoline belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 3; Preparation of 3, 3-dimethylindoline HCI salt; [0066]HCI 1.3 eq.[0067] The resulting mixture from Example 1 was treated with a slow addition of a solution ofNaBH4 (84 g) in 400 mL DI basified with 5N NaOH (pH~13) water in 3h at a temperature below 10 0C, then warmed to about room temperature. The reaction was worked up by adjusting pH to 8 with 14.5N NH4OH and the phases were then separated. The aqueous phase was extracted with IPAC (300 mL x 2). The combined organic phase was washed with DI water (80 mL) and saturated brine (80 mL) to give the corresponding indoline solution (containing 231 g of 3, 3-dimethylindoline, 85% assay yield.) [0068] To this indoline solution (in heptane/IPAC) was added 194 mL propan-2-ol, followed by the addition of 5 N HCl in IPA (408 mL) to form a suspension, which was stirred for 2h before filtration. The wet cake was then washed with heptane (100 mL x2) to afford the 3,3-dimethylindoline HCl salt. (255.6 g, 75.5% yield, 98.4 A% for the HCl salt).

The synthetic route of 3,3-Dimethylindoline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AMGEN INC.; KING, Anthony; LARSEN, Robert; LI, Tj; LU, Yuelie; WO2010/71828; (2010); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1914-02-9, name is 3,3-Dimethylindoline, A new synthetic method of this compound is introduced below., Formula: C10H13N

A mixture of 3,3-dimethylindoline (5s, 103 mg, 0.700 mmol), potassium carbonate (288 mg,2.084 mmol), and 2-bromopropanenitrile (303 muL, 3.506 mmol) in 2 mL CH3CN was stirred at 80C overnight. The mixture was concentrated and purified by preparative HPLC. Fractions containing productwere partly concentrated and residue was extracted with 1 M NaHCO3 and CH2Cl2. Organic phases weredried over MgSO4, filtered, and concentrated to give 2-(3,3-dimethylindolin-1-yl)propanenitrile (105mg). LCMS m/z = 201.2 [M+1]+; 1H NMR (400 MHz, CDCl3) delta ppm 1.26 (s, 3H), 1.40 (s, 3H), 1.63 (d, J = 7.3Hz, 3H), 3.05 (d, 1H, J = 8.2 Hz), 3.25 (d, 1H, J = 8.2 Hz), 4.57 (q, 1 H, J = 7.3 Hz), 6.57 (d, 1H, J = 7.9 Hz),6.83-6.87 (m, 1H), 7.06 (dd, 1H, J1 =7.4 Hz, J2 = 0.8 Hz), 7.12-7.16 (m, 1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Dang, Huong; Feichtinger, Konrad; Frazer, John; Grottick, Andrew J.; Kasem, Michelle; Le, Minh; Lehman, Juerg; Morgan, Michael E.; Ren, Albert; Sage, Carleton R.; Schrader, Thomas O.; Semple, Graeme; Unett, David J.; Whelan, Kevin T.; Wong, Amy; Zhu, Xiuwen; Bioorganic and medicinal chemistry letters; (2020);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 1914-02-9, name is 3,3-Dimethylindoline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 3,3-Dimethylindoline

EXAMPLE 1 STR12 In 0.7 ml of thionyl chloride, 0.13 g of 4,5,6,7-tetrahydrobenzimidazole-5-carboxylic acid hydrochloride (containing sodium chloride) was refluxed for 30 minutes, and volatile components were removed by distillation under reduced pressure. The residue was added to a solution of 0.15 g of 3,3-dimethylindoline and 0.15 ml of triethylamine in 2 ml of dichloromethane under ice-cooling. After stirring the mixture at room temperature overnight, 5 ml of a sodium carbonate aqueous solution was added thereto, and the mixture was extracted with chloroform. The organic layer was dried, and the solvent was removed by distillation under reduced pressure. The residue was subjected to silica gel column chromatography using chloroform/methanol as an eluent to obtain 0.11 g of 5-[(2,3-dihydro-3,3-dimethylindol-1-yl)carbonyl]-4,5,6,7-tetrahydrobenzimidazole as an oily substance.

The synthetic route of 3,3-Dimethylindoline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Yamanouchi Pharmaceutical Co., Ltd.; US5344927; (1994); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

1914-02-9, name is 3,3-Dimethylindoline, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. SDS of cas: 1914-02-9

Example 18b Synthesis of 2-[2-(3,3-dimethyl-2,3-dihydroindol-1-yl)-2-oxoethyl]-6-morpholin(D4)-4-yl-3H-pyrimidin-4-one Step 1b: Synthesis of 2-(4-chloro-6-methoxypyrimidin-2-yl)-1-(3,3-dimethyl-2,3-dihydroindol-1-yl)ethanone 0.5 g of the sodium salt of (4-methoxy-6-chloropyrimidin-2-yl)acetic acid (example 8b, step 3b), 0.33 g of 3,3-dimethyl-2,3-dihydro-1H-indole (CAS 1914-02-9), 0.4 ml of pyridine and 5 ml of dimethylformamide are placed in a three-necked flask so as to obtain a homogeneous brown solution. 512 mg of N-[3-(dimethylamino)propyl]-N?-ethylcarbodiimide are added at ambient temperature and the mixture is stirred at ambient temperature for 20 hours. The resulting product is concentrated in a rotary evaporator under vacuum, 40 ml of water are added, extraction is carried out with 3 times approximately 25 ml of dichloromethane, washing is carried out with 50 ml of saturated NaCl solution, drying is carried out over MgSO4, and the resulting product is filtered through a VF filter. The compound obtained is purified by chromatography on silica gel (40-63 mum), elution being carried out with a 98/2 dichloromethane/methanol mixture. The fractions containing the expected compound are combined and evaporated under reduced pressure. 2-(4-Chloro-6-methoxypyrimidin-2-yl)-1-(3,3-dimethyl-2,3-dihydroindol-1-yl)ethanone is isolated: 0.3 g of a yellow oil; yield 41%, which is used as it is in the next step.

The synthetic route of 1914-02-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SANOFI; Brollo, Maurice; Carry, Jean-Christophe; Certal, Victor; Didier, Eric; Doerflinger, Gilles; EL Ahmad, Youssef; Filoche-Romme, Bruno; Halley, Frank; Karlsson, Karl Andreas; Schio, Laurent; Thompson, Fabienne; US2013/274253; (2013); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1914-02-9, name is 3,3-Dimethylindoline, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C10H13N

Example 1 N-(3,3-Dimethylindolin-1-yl)-3-(4-imidazolyl)propionamide monohydrochloride (E1) A suspension of 3-(4-imidazolyl)propionic acid monohydrochloride (2.0g) (Chem. Ber. 66 , 156 [1933]) in thionyl chloride (10ml) and DMF (3 drops) was stirred at room temperature for 3h. The excess thionyl chloride was removed by rotary evaporation and the residue re-evaporated with 2 x 50ml of dry toluene. The residue was suspended in CH2Cl2 (100ml) and a solution of 3,3-dimethyl indoline (1.7g) and triethylamine (4ml) in CH2Cl2 (50ml) was added with stirring and cooling. The reaction mixture was stirred overnight, washed with saturated NaHCO3 and the lower organic layer dried (Na2SO4). Concentration of the organic extracts afforded the crude product which was purified by column chromatography on silica, eluding with CHCl3 containing increasing quantities of methanol.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1914-02-9.

Reference:
Patent; BEECHAM GROUP PLC; EP387431; (1990); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 1914-02-9, A common heterocyclic compound, 1914-02-9, name is 3,3-Dimethylindoline, molecular formula is C10H13N, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 40 1-{1-[6-(3,3-dimethyl-2,3-dihydroindole-1-carbonyl)-pyrimidin-4-yl]piperidin-4-yl}-1,3-dihydro-imidazo[4,5-b]pyridin-2-one 70 mg (0.21 mmol) 6-[4-(2-oxo-2,3-dihydroimidazo[4,5-b]pyridin-1-yl)-piperidin-1-yl]-pyrimidine-4-carboxylic acid, 30.33 mg (0.21 mmol) 3,3-dimethyl-2,3-dihydro-1H-indole, 71 mg (0.22 mmol) TBTU and 56 muL (0.40 mmol) triethylamine in 2 mL DMF were stirred overnight at RT. The mixture was separated by preparative HPLC. The product fractions were combined and lyophilised. Yield: 55 mg (57% of theoretical) ESI-MS: m/z=470 (M+H)+

The synthetic route of 1914-02-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; US2011/195954; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem