Category: 17630-75-0

Reference of 17630-75-0,When developing chemical systems it’s of course important to gain a deep understanding of the chemical reaction process.

A mixture of 5-chlorooxindole (6.98 g, 41.6 mmol), 3,5-dimethyl-1H-pyrrole-2-carboxaldehyde (5.12 g, 41.6 mmol) and piperidine (410 muL, 4.16 mmol) in 200 mL of EtOH was heated at reflux for 8 h. The reaction mixture was cooled to room temperature and filtered to give the title compound (4.50 g, 40%) as a red/orange solid.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 17630-75-0 is helpful to your research.

Reference:
Patent; Allergan, Inc.; US6699863; (2004); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

COA of Formula: C8H6ClNO,When developing chemical systems it’s of course important to gain a deep understanding of the chemical reaction process.

A 5 mL of ethanol solution containing 5-chlorooxindole (167 mg, 1 mmol), 2- pyridine-carboxaldehyde (129 mg, 1.2 mmol) and 3 drops of piperidine was stirred at 80C for 6 hours. After cooling the solution to 5C, yellow precipitate was obtained (200 mg, 78%). MS: TITLE 257 [M+1] +.

Interested yet? This just the tip of the iceberg, You can reading other blog about 17630-75-0.

Reference:
Patent; IRM LLC; THE SCRIPPS RESEARCH INSTITUTE; WO2004/37247; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

HPLC of Formula: C8H6ClNO, The chemical industry reduces the impact on the environment during synthesis 17630-75-0, name is 5-Chloro-2-oxindole, I believe this compound will play a more active role in future production and life.

7-Bromo-5-Chloro-2-Oxindole 5-Chloro-2-oxindole (16.8 g) and 19.6 g of N-bromosuccinimide were suspended in 140 mL of acetonitrile and refluxed for 3 hours. Thin layer chromatography (silica, ethyl acetate) at 2 hours of reflux showed 5-chloro-2-oxindole or N-bromosuccinimide (Rf 0.8), product (Rf 0.85) and a second product (Rf 0.9) whose proportions did not change after another hour of reflux. The mixture was cooled to 10 C., the precipitate was collected by vacuum filtration, washed with 25 mL of ethanol and sucked dry for 20 minutes in the funnel to give 14.1 g of wet product (56% yield). The solid was suspended in 200 mL of denatured ethanol and slurry-washed by stirring and refluxing for 10 minutes. The mixture was cooled in an ice bath to 10 C. The solid product was collected by vacuum filtration, washed with 25 mL of ethanol and dried under vacuum at 40 C. to give 12.7 g (51% yield) of 7-bromo-5-chloro-2-oxindole.

In the meantime we’ve collected together some recent articles in this area about 17630-75-0 to whet your appetite. Happy reading!

Reference:
Patent; Sugen. Inc.; US2003/100555; (2003); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 17630-75-0, name is 5-Chloro-2-oxindole, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 17630-75-0, Recommanded Product: 17630-75-0

7-Bromo-5-Chloro-2-Oxindole 5-Chloro-2-oxindole (16.8 g) and 19.6 g of N-bromosuccinimide were suspended in 140 mL of acetonitrile and refluxed for 3 hours. Thin layer chromatography (silica, ethyl acetate) at 2 hours of reflux showed 5-chloro-2-oxindole or N-bromosuccinimide (Rf 0.8), product (Rf 0.85) and a second product (Rf 0.9) whose proportions did not change after another hour of reflux. The mixture was cooled to 10 C., the precipitate was collected by vacuum filtration, washed with 25 mL of ethanol and sucked dry for 20 minutes in the funnel to give 14.1 g of wet product (56% yield). The solid was suspended in 200 mL of denatured ethanol and slurry-washed by stirring and refluxing for 10 minutes. The mixture was cooled in an ice bath to 10 C. The solid product was collected by vacuum filtration, washed with 25 mL of ethanol and dried under vacuum at 40 C. to give 12.7 g (51% yield) of 7-bromo-5-chloro-2-oxindole.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Chloro-2-oxindole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Sugen. Inc.; US2003/100555; (2003); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 17630-75-0, name is 5-Chloro-2-oxindole, A new synthetic method of this compound is introduced below., Product Details of 17630-75-0

A 5 mL of ethanol solution containing 5-chlorooxindole (167 mg, 1 mmol), 2- pyridine-carboxaldehyde (129 mg, 1.2 mmol) and 3 drops of piperidine was stirred at 80C for 6 hours. After cooling the solution to 5C, yellow precipitate was obtained (200 mg, 78%). MS: TITLE 257 [M+1] +.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; IRM LLC; THE SCRIPPS RESEARCH INSTITUTE; WO2004/37247; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 17630-75-0, name is 5-Chloro-2-oxindole, A new synthetic method of this compound is introduced below., Recommanded Product: 17630-75-0

General procedure: An oven-dried flask was charged with stir bar, oxindole (0.5 mmol), PIDA (0.25 mmol) in dry acetonitrile (4.0 mL). Then to the reaction mixture TEMPO (0.5 mmol) was added in presence of air and the mixture was stirred at room temperature until complete conversion takes place as indicated by TLC analysis. The resulting reaction mixture was extracted with ethyl acetate (3 10 mL). The combined organics were dried with Na2SO4 and dried under vacuum to afford crude solid. Then the crude product was purified by column chromatography on silica gel.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Sai Prathima, Parvathaneni; Bikshapathi, Raktani; Rao, Vaidya Jayathirtha; Tetrahedron Letters; vol. 56; 46; (2015); p. 6385 – 6388;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 17630-75-0 as follows. Quality Control of 5-Chloro-2-oxindole

A mixture of 5-chlorooxindole (6.98 g, 41.6 mmol), 3,5-dimethyl-1H-pyrrole-2-carboxaldehyde (5.12 g, 41.6 mmol) and piperidine (410 muL, 4.16 mmol) in 200 mL of EtOH was heated at reflux for 8 h. The reaction mixture was cooled to room temperature and filtered to give the title compound (4.50 g, 40%) as a red/orange solid.

According to the analysis of related databases, 17630-75-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Allergan, Inc.; US2004/102509; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 17630-75-0, name is 5-Chloro-2-oxindole, A new synthetic method of this compound is introduced below., COA of Formula: C8H6ClNO

General procedure: To a Schlenk tube were added indolin-2-one 1 (0.3 mmol), t-BuOOH (0.6 mmol), and DCE (2 mL). Then the tube was stirred at 85 oC under air for the indicated time until complete consumption of starting material monitored by TLC analysis. After the reaction was finished, the reaction mixture was washed with brine. The aqueous phase was re-extracted with ethyl acetate (3×10 mL). The combined organic extracts were dried over Na2SO4, removal of the solvent under vacuum afforded the crude product, which was purified further by column chromatography using hexane-ethyl acetate (10:1).

The synthetic route of 17630-75-0 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ying, Wei-Wei; Zhu, Wen-Ming; Liang, Hongze; Wei, Wen-Ting; Synlett; vol. 29; 2; (2018); p. 215 – 218;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 17630-75-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 17630-75-0, name is 5-Chloro-2-oxindole belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 5-chlorooxindole (6.98 g, 41.6 mmol), 3,5-dimethyl-1H-pyrrole-2-carboxaldehyde (5.12 g, 41.6 mmol) and piperidine (410 muL, 4.16 mmol) in 200 mL of EtOH was heated at reflux for 8 h. The reaction mixture was cooled to room temperature and filtered to give the title compound (4.50 g, 40%) as a red/orange solid.

The synthetic route of 5-Chloro-2-oxindole has been constantly updated, and we look forward to future research findings.

Adding a certain compound to certain chemical reactions, such as: 17630-75-0, name is 5-Chloro-2-oxindole, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 17630-75-0, Safety of 5-Chloro-2-oxindole

7-Bromo-5-chloro-2-oxindole 5-Chloro-2-oxindole (16.8 g) and 19.6 g of N-bromosuccinimide were suspended in 140 ML of acetonitrile and refluxed for 3 hours.. Thin layer chromatography (silica, ethyl acetate) at 2 hours of reflux showed 5-chloro-2-oxindole or N-bromosuccinimide (Rf 0.8), product (Rf 0.85) and a second product (Rf 0.9) whose proportions did not change after another hour of ref lux.. The mixture was cooled to 10 C., the precipitate was collected by vacuum filtration, washed with 25 ML of ethanol and sucked dry for 20 minutes in the funnel to give 14.1 g of wet product (56% yield).. The solid was suspended in 200 ML of denatured ethanol and slurry-washed by stirring and refluxing for 10 minutes.. The mixture was cooled in an ice bath to 10 C. The solid product was collected by vacuum filtration, washed with 25 ML of ethanol and dried under vacuum at 40 C. to give 12.7 g (51% yield) of 7-bromo-5-chloro-2-oxindole.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Chloro-2-oxindole, and friends who are interested can also refer to it.