Category: 169037-23-4

Application of 169037-23-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 169037-23-4 name is 5-(Trifluoromethoxy)indoline-2,3-dione, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: To a solution of isatin (0.2 mmol) and indole (0.2 mmol) in pyridine (0.5 mL) was added K2CO3 (0.2 mmol) under an airatmosphere and the mixture was stirred at 40C for 2 h. Then,morpholine (0.3 mmol), CuI (0.04 mmol), and benzoic acid(0.1 mmol) were added to the reaction mixture and the resultingmixture was heated at 80C for another 5 h. The reaction mixturewas concentrated under reduced pressure. The residue was puriedby ash chromatography on silica gel (eluent: EtOAc/PE 1:1) toyield the corresponding product 4a.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-(Trifluoromethoxy)indoline-2,3-dione, and friends who are interested can also refer to it.

Reference:
Article; Peng, Xiangjun; Xu, Xianyun; Chen, Shuangyang; Tian, Zeng; Liu, Liangxian; Liu, Qian; Tetrahedron; vol. 74; 13; (2018); p. 1505 – 1512;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 169037-23-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of indoline-2,3-dione 1 (1mmol), l-tryptophan (2a) or l-histidine 2b (1mmol) and (E)-(2-nitrovinyl)benzene 3 (1.1mmol) was heated while stirred in [bmim]Br as the reaction medium (3mL) for 1hat 100C. After completion of the reaction (TLC), EtOAc (5mL) was added and the reaction mixture was stirred for 10min. This treatment was repeated and the combined ethyl acetate layers were removed in vacuo. The crude product was purified by recrystallization of the residue from EtOH (compounds 4) or by column chromatography (compounds 5). After extraction of the product, the ionic liquid was dried under vacuum at 80C for 2h to eliminate any water and could be reused for subsequent runs of the reaction.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-(Trifluoromethoxy)indoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Arumugam, Natarajan; Almansour, Abdulrahman I.; Kumar, Raju Suresh; Periasamy, Vaiyapuri Subbarayan; Athinarayanan, Jegan; Alshatwi, Ali A.; Govindasami, Periyasami; Altaf, Mohammad; Menendez, J. Carlos; Tetrahedron; vol. 74; 38; (2018); p. 5358 – 5366;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 5-(Trifluoromethoxy)indoline-2,3-dione

Weigh 5-trifluoromethoxyBlush1.0g (0.0043mol),5-chloroindole anhydride 0.9g (0.0045mol) was added to a 100ml three-necked flask containing magnetons.Then add 40 ml of chloroform to the three-necked flask.1.5 ml of triethylamine, heated to reflux in an oil bath at 80 C for 3 h,After the reaction is over, stop heating and wait for cooling.The crude product was obtained as a yellow solid powder by suction filtration.The product was washed 3 times with 10 ml of ethanol.Obtaining a pure product yellow solid powder,drying,Weighing 1.12g,The yield was 70.9%.

The synthetic route of 169037-23-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Northwest University; Wang Cuiling; Bai Xiao; Zhang Xiaobin; Liu Jianli; (16 pag.)CN110143964; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 169037-23-4, Recommanded Product: 169037-23-4

General procedure: The NiO-SiO2 catalyst (6.5 mol%) was added to a mixture of isatin (1 mmol), malononitrile (1 mmol), and 3-methyl-1-phenyl-1H-pyrazol-5-amine (1 mmol) in EtOH, and the reaction flask was placed in an oil bath and refluxed for the appropriate time. The progress of reaction was monitored by TLC. After the completion of the reaction, the heterogeneous catalyst was recovered from the reaction mixture by filtration. The filtrate was evaporated to afford the crude solid product which was later purified by column chromatography. The solid catalyst was washed with hot EtOH and then dried in oven to reuse.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-(Trifluoromethoxy)indoline-2,3-dione, and friends who are interested can also refer to it.

Reference:
Article; Yagnam, Swetha; Akondi, Adinarayana Murthy; Trivedi, Rajiv; Rathod, Balaji; Prakasham, Reddy Shetty; Sridhar; Synthetic Communications; vol. 48; 3; (2018); p. 255 – 266;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 169037-23-4, Computed Properties of C9H4F3NO3

General procedure: A mixture of beta-nitrostyrenes, isatin and tyrosine (1:1:1) was stirredunder heating at 100 C for 1 h in [bmim]Br (200 mg). After the reaction was completed, 10 mL of ethyl acetate was added to the reaction mixture and stirred for 15 min. The organic layer was separated, washed with water, and dried. The cycloadduct was further purified using hexane: ethyl acetate (3:2 v/v) as eluent employing column chromatography technique. After extraction of the cycloadduct, [bmim]Br wasdried under vacuum at 80 C for 2 h to exclude any water trapped from moisture and reused for subsequent runs.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-(Trifluoromethoxy)indoline-2,3-dione, and friends who are interested can also refer to it.

Reference:
Article; Kumar, Raju Suresh; Almansour, Abdulrahman I.; Arumugam, Natarajan; Mohammad, Faruq; Kotresha; Menendez, J. Carlos; Bioorganic and Medicinal Chemistry; vol. 27; 12; (2019); p. 2487 – 2498;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 169037-23-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 169037-23-4 name is 5-(Trifluoromethoxy)indoline-2,3-dione, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

EXAMPLE 133-(1 ,4′-bipiperidin-1 ‘-ylmethyl)-//-(1 -phenylcvclopropyl)-6-r(trifluoromethyl)oxyl-2-r3- (trifluorometh l)phenyll-4-quinolinecarboxamide3-methyl-6-r(trifluoromethyl)oxyl-2-r3-(trifluoromethyl)phenyll-4-quinolinecarboxylic acidTo a suspension of 5-[(trifluoromethyl)oxy]-1 /-/-indole-2,3-dione (5.0 g, 21 .63 mmol) in ethanol (50 mL) was added a solution of potassium hydroxide (7.28 g, 130 mmol) in water (20.00 mL) slowly. 1 -[3-(Trifluoromethyl)phenyl]-1 -propanone was added (4.37 g, 21.63 mmol) and the mixture was heated to reflux for 1 h. The ethanol was removed under reduced pressure and the residue was dissolved in water and washed with diethyl ether. The aqueous mixture was chilled and adjusted to pH 3 with concentrated HCI. The solid was collected by filtration, washed with H20, and air dried to afford 3-methyl-6- [(trifluoromethyl)oxy]-2-[3-(trifluoromethyl)phenyl]-4-quinolinecarboxylic acid (8.5 g, 95% yield). MS (m/z) 416.1 (M+H+).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-(Trifluoromethoxy)indoline-2,3-dione, and friends who are interested can also refer to it.

Reference:
Patent; GLAXOSMITHKLINE LLC; BROOKS, Carl, A.; CHEUNG, Mui; EIDAM, Hilary, S.; FOX, Ryan, M; HILFKER, Mark, A.; MANAS, Eric, S.; YE, Guosen; WO2011/119704; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. name: 5-(Trifluoromethoxy)indoline-2,3-dione

General procedure: A mixture of bisarylidenepiperidin-4-one (1.36 mmoL), isatin (2.72 mmoL) and L-phenylalanine (2.72 mmoL) were heated with stirring in [bmim]Br medium (3 mL) for 1 h at 100 C. After completion of the reaction (TLC), ethyl acetate (2 x 5 mL) was added and the reaction mixture was stirred for 10 min. The organic layer was removed under reduced pressure and the crude product was purified by column chromatography (ethyl acetate:hexane v/v 3:7). 5′-Benzyl-4′-(m-tolyl)-5-(trifluoromethoxy)spiro[3,2′]oxindolopyrrolidino-4′-(methylphenyl)-1?-styryl-5-benzylidene-spiro[3′.3?]piperidin-4?-one (5h): Melting point 234-236 C; white solid, 88%; 1H-NMR (CDCl3, 400 MHz): delta/ppm 4.99 (d, J = 14.5 Hz, 1H), 4.63-4.68 (m, 1H), 4.34 (d, J = 10.0 Hz, 1H), 3.77 (d, J = 14.00 Hz, 1H), 3.68 (d, J = 15.00 Hz, 1H), 3.38-3.47 (dd, J = 15 Hz, 1H), 3.00-3.03 (dd, J = 14.5 Hz,1H), 2.72-2.76 (m, 1H), 2.56 (d, J = 14.0 Hz, 1H), 2.33 (s, 3H), 2.27 (s, 3H), 6.60 (d, J = 14.5 Hz, 2H), 6.79-7.71 (m, 21H, Ar); 13C-NMR (CDCl3, 100 MHz): delta/ppm 21.1, 21.4, 39.4, 47.4, 52.8, 52.9, 61.1, 66.9, 70.8, 100.8, 109.5, 119.5, 120.9, 121.5, 122.4, 123.9, 124.3, 126.3, 128.4, 128.5, 128.6, 129.2, 129.4, 129.5, 130.5, 131.7, 133.6, 135.3, 136.2, 136.8, 138.3, 138.5, 138.8, 139.7, 139.8. 140.0, 144.3, 179.7, 197.1. EI-MS: m/z 739 (M+). Anal. Calcd for C46H40F3N3O3: C, 74.68; H, 5.45; N, 5.68. Found: C, 74.77; H, 5.55;N, 5.81.

The synthetic route of 169037-23-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Arumugam, Natarajan; Almansour, Abdulrahman I.; Kumar, Raju Suresh; Govindasami, Periyasami; Al-thamili, Dhaifallah M.; Krishnamoorthy, Rajapandian; Periasamy, Vaiyapuri Subbarayan; Alshatwi, Ali A.; Mahalingam; Thangamani, Shankar; Menendez, J. Carlos; Molecules; vol. 23; 5; (2018);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 169037-23-4

General procedure: (The reagents were purchased fromAdamas and used without further purification.) A dry 3-mL flask was chargedwith relevant isatin 5 (0.3 mmol), tert-butyl 2-aminoacetate hydrochloride 7(0.3 mmol) and benzophenone imine 8 (0.36 mmol). The reaction mixture wasstirred at room temperature for the corresponding time. After the completionof the reaction, the reaction mixture was directly purified by silica gelchromatography (ethyl acetate/petroleum ether = 1:4) to give product 6. Asolution of 6 in EA/TFA (10:1) was stirred in a 10-mL flask under roomtemperature for 3 h. The solvent was removed under vacuum. The residue wasrecrystallized in diethyl ether/petroleum ether to give product 9.

According to the analysis of related databases, 169037-23-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Huang, Huang; Xu, Yong; Mao, Fei; Zhu, Jin; Jiang, Hualiang; Li, Jian; Tetrahedron Letters; vol. 56; 4; (2015); p. 586 – 589;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 169037-23-4,Some common heterocyclic compound, 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, molecular formula is C9H4F3NO3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 1 A6-bromo-2-(trifluoromethyl)quinoline-4-carboxylic acid 300 mg (1.33 mmol) of 5-bromo-1 H-indole-2,3-dione was suspended in 3 mL water in a microwave vial. 82 mg ( 1.46 mmol) potassium hydroxide, 152 muL (2.65 mmol) acetic acid and 152 mg (1.86 mmol) sodium acetate were added so that the pH was around 5. The solution was cooled to 10 C and 238 muL (2.65 mmol) 1 ,1,1 -trifluoroacetone was added rapidly, the microwave vial was sealed and heated in the microwave for 2 h at 120 C. The reaction was stopped by the addition of 10% aqueous hydrochloric acid solution and the resulting precipitate was isolated by filtration, washed with water and dried in a vacuum drying cabinet at 50 C overnight to obtain 409 mg (1.28 mmol, 96%) of the desired title compound .In analogy to intermediate 1A, 200 mg (0.87 mmol) 5-(trifluoromethoxy)-1 H-indole-2,3-dione was heated with 388 muL (4.33 mmol) 1,1,1 -trifluoroacetone, 53 mg (0.95 mmol) potassium hydroxide, 99 muL (1.73 mmol) acetic acid and 99 mg (1.21 mmol) sodium acetate in 2 mL water for 1 h at 120 C in the microwave to obtain 269 mg (0.83 mmol, 96%) of the desired title compound after aqueous work-up.1 H NMR (400 MHz, DMSO d6): delta (ppm) = 8.01 (dd, 1 H), 8.38 (s, 1 H), 8.44 (d, 1 H), 8.85 – 8.89 (m, 1 H), 14.57 (br. s. , 1 H).

The synthetic route of 169037-23-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; HEISLER, Iring; MUeLLER, Thomas; SIEBENEICHER, Holger; BUCHMANN, Bernd; CLEVE, Arwed; GUeNTHER, Judith; KOPPITZ, Marcus; HEROULT, Melanie; NEUHAUS, Roland; PETRUL, Heike; QUANZ-SCHOeFFEL, Maria; WO2015/91428; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, A new synthetic method of this compound is introduced below., name: 5-(Trifluoromethoxy)indoline-2,3-dione

General procedure: The mixture of isatin 1 (58.9 mg, 0.4 mmol), antipyrine 2 (37.6 mg, 0.2 mmol) andimidazole (20 mol %, 0.04 mmol) in 1 mL H2O were stirred at 80 . Once thereaction completed, the solid mixture was filtered, washed by water and dried undervacuum to afford the analytically pure products 3. In some cases, the desired pureproducts were obtained by silica gel chromatography using ethyl acetate as eluent.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Zhang, Yong; Nie, Long-Jun; Luo, Liang; Mao, Jia-Xin; Liu, Jin-Xiang; Xu, Guo-Hai; Chen, Deliang; Luo, Hai-Qing; Tetrahedron; vol. 76; 7; (2020);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem