Category: 169037-23-4

Related Products of 169037-23-4, The prevalence of solvent effects in heterogeneous catalysis has motivated developing quantitative kinetic, spectroscopic, and theoretical assessments of solvent structures and their interactions with reaction intermediates and transition states.

General procedure: General method: The Schiff bases were obtained by adding an ethanolic solution of the hydrazinyl component to the solution of the keto component in equimolar amounts, refluxing the mixture in the presence of catalytic amounts of acid. If not indicated otherwise, purification was carried out by recrystallization. Carbazides were prepared by adding an equimolar amount of hydrazine to the methanolic solution of the respective isothiocyanate [53]. For the picolinylidene derivatives with ethyl group in 5-position of the pyridine moiety (2e, 2k), 5-Ethylpicolinaldehyde was prepared from 5-ethyl-2-methyl-pyridine as reported previously [13,115]. The reaction of 5-trifluoromethoxyisatin (50mg, 0.22mmol) with N-(4-methoxyphenyl)hydrazinecarbothioamide C-1 (43mg, 0.22mmol) in ethanolic solution under HCl-catalysis resulted in a yellow fluffy precipitate, which was identified as the product in 70% yield (65.7mg, 0.16mmol). 1H NMR (500MHz, DMSO-d6): delta=12.60 (s, 1H), 11.36 (s, 1H), 10.78 (s, 1H), 7.78 (s, 1H), 7.49-7.41 (m, 2H), 7.41-7.31 (m, 1H), 7.02 (d, 1H, 3J(H,H)=5.0Hz), 7.01-6.95 (m, 2H), 3.78 (s, 3H). 13C NMR (126MHz, DMSO-d6): delta=176.6, 162.7, 157.5, 143.5, 141.2, 131.1, 130.9, 127.3 (2C), 124.0, 121.5, 120.7 (d {121.19, 119.15}, 1J(C,F)=255.7Hz), 114.4 (2C), 113.6, 112.1, 55.3. Anal. Calcd. for C17H13N4SO3F3: C: 49.76; H: 3.19; N: 13.65. Found: C: 49.61; H: 3.477; N: 13.53

According to the analysis of related databases, 169037-23-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Pape, Veronika F.S.; Toth, Szilard; Fueredi, Andras; Szebenyi, Kornelia; Lovrics, Anna; Szabo, Pal; Wiese, Michael; Szakacs, Gergely; European Journal of Medicinal Chemistry; vol. 117; (2016); p. 335 – 354;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Application of 169037-23-4

General procedure: To a suspension of intermediate 6 (0.2mmol) in anhydrous EtOH (30mL) was added different substituent (0.2mmol). The mixture was continually stirred under 50C for 2~3h until no starting material. Then the solvent was evaporated by rotary evaporation. The residue was purified by flash chromatography to afford compounds 7a-n.

In the meantime we’ve collected together some recent articles in this area about 169037-23-4 to whet your appetite. Happy reading!

Reference:
Article; Li, Hongling; Wang, Haijun; Wang, Jing; Lin, Yu; Ma, Yukun; Bu, Ming; Steroids; vol. 153; (2020);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

name: 5-(Trifluoromethoxy)indoline-2,3-dione,When developing chemical systems it’s of course important to gain a deep understanding of the chemical reaction process.

General procedure: A mixture of bisarylidenepiperidin-4-one (1.36 mmoL), isatin (2.72 mmoL) and L-phenylalanine (2.72 mmoL) were heated with stirring in [bmim]Br medium (3 mL) for 1 h at 100 C. After completion of the reaction (TLC), ethyl acetate (2 x 5 mL) was added and the reaction mixture was stirred for 10 min. The organic layer was removed under reduced pressure and the crude product was purified by column chromatography (ethyl acetate:hexane v/v 3:7). 5′-Benzyl-4′-(p-bromophenyl)-5-(trifluoromethoxy)spiro[3,2′]oxindolopyrrolidino-4′-(p-bromophenyl-1?-styryl-5-benzylidene-spiro[3′.3?]piperidin-4?-one (5c): Melting point 255-257 C White solid, 97%; 1H-NMR (CDCl3, 400 MHz): delta/ppm 4.98 (d, J = 3.96 Hz, 1H), 4.56-4.62 (m, 1H), 4.22-4.29 (m, 1H), 3.74 (d, J = 13.2 Hz, 1H), 3.63 (d, J = 16.82 Hz, 1H), 3.37 (d, J = 15.4 Hz, 1H), 2.90 (d, J = 13.96 Hz, 1H), 2.72-2.78 (m, 1H), 2.53 (d, J = 13.92 Hz, 1H), 6.53-6.62 (m, 2H), 6.88-7.55 (m, 21H, Ar); 13C-NMR(CDCl3, 100 MHz): delta/ppm 39.7, 47.3, 52.8, 53.2, 61.4, 67.2, 70.8, 100.8, 110.0, 121.9, 122.4, 122.5, 123.8, 124.3, 126.4, 126.5, 128.5, 128.6, 129.1, 129.2, 130.7, 131.5, 131.7, 131.9, 133.2, 136.2, 136.3, 138.1, 138.4, 138.6, 140.2, 144.6, 179.6, 197.1. EI-MS: m/z 869 (M+). Anal. Calcd for C44H34Br2F3N3O3: C, 60.77; H, 3.94; N, 4.83; Found: C, 60.89; H, 3.81; N, 4.75.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 169037-23-4.

Reference:
Article; Arumugam, Natarajan; Almansour, Abdulrahman I.; Kumar, Raju Suresh; Govindasami, Periyasami; Al-thamili, Dhaifallah M.; Krishnamoorthy, Rajapandian; Periasamy, Vaiyapuri Subbarayan; Alshatwi, Ali A.; Mahalingam; Thangamani, Shankar; Menendez, J. Carlos; Molecules; vol. 23; 5; (2018);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C9H4F3NO3

General procedure: A mixture of beta-nitrostyrenes, isatin and tyrosine (1:1:1) was stirredunder heating at 100 C for 1 h in [bmim]Br (200 mg). After the reaction was completed, 10 mL of ethyl acetate was added to the reaction mixture and stirred for 15 min. The organic layer was separated, washed with water, and dried. The cycloadduct was further purified using hexane: ethyl acetate (3:2 v/v) as eluent employing column chromatography technique. After extraction of the cycloadduct, [bmim]Br wasdried under vacuum at 80 C for 2 h to exclude any water trapped from moisture and reused for subsequent runs.

The synthetic route of 169037-23-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Kumar, Raju Suresh; Almansour, Abdulrahman I.; Arumugam, Natarajan; Mohammad, Faruq; Kotresha; Menendez, J. Carlos; Bioorganic and Medicinal Chemistry; vol. 27; 12; (2019); p. 2487 – 2498;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 169037-23-4, Chemical engineers ensure the efficiency and safety of chemical processes, adapt the chemical make-up of products to meet environmental or economic needs, and apply new technologies to improve existing processes.

Intermediate 1 A6-bromo-2-(trifluoromethyl)quinoline-4-carboxylic acid 300 mg (1.33 mmol) of 5-bromo-1 H-indole-2,3-dione was suspended in 3 mL water in a microwave vial. 82 mg ( 1.46 mmol) potassium hydroxide, 152 muL (2.65 mmol) acetic acid and 152 mg (1.86 mmol) sodium acetate were added so that the pH was around 5. The solution was cooled to 10 C and 238 muL (2.65 mmol) 1 ,1,1 -trifluoroacetone was added rapidly, the microwave vial was sealed and heated in the microwave for 2 h at 120 C. The reaction was stopped by the addition of 10% aqueous hydrochloric acid solution and the resulting precipitate was isolated by filtration, washed with water and dried in a vacuum drying cabinet at 50 C overnight to obtain 409 mg (1.28 mmol, 96%) of the desired title compound .In analogy to intermediate 1A, 200 mg (0.87 mmol) 5-(trifluoromethoxy)-1 H-indole-2,3-dione was heated with 388 muL (4.33 mmol) 1,1,1 -trifluoroacetone, 53 mg (0.95 mmol) potassium hydroxide, 99 muL (1.73 mmol) acetic acid and 99 mg (1.21 mmol) sodium acetate in 2 mL water for 1 h at 120 C in the microwave to obtain 269 mg (0.83 mmol, 96%) of the desired title compound after aqueous work-up.1 H NMR (400 MHz, DMSO d6): delta (ppm) = 8.01 (dd, 1 H), 8.38 (s, 1 H), 8.44 (d, 1 H), 8.85 – 8.89 (m, 1 H), 14.57 (br. s. , 1 H).

The synthetic route of 169037-23-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; HEISLER, Iring; MUeLLER, Thomas; SIEBENEICHER, Holger; BUCHMANN, Bernd; CLEVE, Arwed; GUeNTHER, Judith; KOPPITZ, Marcus; HEROULT, Melanie; NEUHAUS, Roland; PETRUL, Heike; QUANZ-SCHOeFFEL, Maria; WO2015/91428; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Chemical research careers are more diverse than they might first appear, as there are many different reasons to conduct research and many possible environments. Synthetic Route of 169037-23-4

General procedure: A mixture of bisarylidenepiperidin-4-one (1.36 mmoL), isatin (2.72 mmoL) and L-phenylalanine (2.72 mmoL) were heated with stirring in [bmim]Br medium (3 mL) for 1 h at 100 C. After completion of the reaction (TLC), ethyl acetate (2 x 5 mL) was added and the reaction mixture was stirred for 10 min. The organic layer was removed under reduced pressure and the crude product was purified by column chromatography (ethyl acetate:hexane v/v 3:7). 5′-Benzyl-4′-(o-tolyl)-5-(trifluoromethoxy)spiro[3,2′]oxindolopyrrolidino-4′-(o-methylphenyl)-1?-styryl-5-benzylidene-spiro[3′.3?]piperidin-4?-one (5g): Melting point 229-231 C; white solid, 89%; 1H-NMR (CDCl3, 400 MHz): delta/ppm 4.96 (d, J = 14.5 Hz, 1H), 4.53-4.62 (m, 1H), 4.21 (d, J = 10.0 Hz, 1H), 3.64 (d, J = 14.00 Hz, 1H), 3.59 (d, J = 15.00 Hz, 1H), 3.37-3.42 (dd, J = 15 Hz, 1H), 2.98-3.02 (dd, J = 14.5 Hz,1H), 2.66-2.71 (m, 1H), 2.48 (d, J = 14.0 Hz, 1H), 2.33 (s, 3H), 2.31 (s, 3H), 6.49-6.58 (m, 2H), 6.99-7.39 (m, 21H, Ar); 13C-NMR (CDCl3, 100 MHz): delta/ppm 21.1, 21.5, 39.5, 47.4, 52.8, 52.9, 61.1, 66.9, 70.8, 100.7,109.6, 119.6, 120.9, 121.5, 122.4, 123.9, 124.2, 126.4, 128.4, 128.5, 129.1, 129.3, 129.35, 130.4, 131.6, 133.7, 135.2, 135.8, 136.2, 136.8, 138.2, 138.4, 138.7, 139.6, 139.8. 140.0, 144.3, 179.9, 197.1. EI-MS: m/z 739 (M+). Anal. Calcd for C46H40F3N3O3: C, 74.68; H, 5.45; N, 5.68. Found: C, 74.78; H, 5.51; N, 5.81.

In the meantime we’ve collected together some recent articles in this area about 169037-23-4 to whet your appetite. Happy reading!

Reference:
Article; Arumugam, Natarajan; Almansour, Abdulrahman I.; Kumar, Raju Suresh; Govindasami, Periyasami; Al-thamili, Dhaifallah M.; Krishnamoorthy, Rajapandian; Periasamy, Vaiyapuri Subbarayan; Alshatwi, Ali A.; Mahalingam; Thangamani, Shankar; Menendez, J. Carlos; Molecules; vol. 23; 5; (2018);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Chemistry graduates have much scope to use their knowledge in a range of research sectors, including roles within chemical engineering, chemical and related industries, healthcare and more. , Reference of 169037-23-4

General procedure: To a solution of isatin 1 (1 mmol) in toluene (5 mL) was added the solution of trialkyl/aryl Al 2 (2 mmol, 2 M in toluene) dropwise at RT. Then the mixture was heated at 70 C and stirred for additional 3-3.5 h (see Table 2). The reaction was monitored by TLC. After completion of the reaction, toluene was evaporated and extracted with ethyl acetate (3 × 5 mL). The combined organic layer was washed with brine solution, dried over anhydrous Na2SO4, and concentrated under reduced pressure (rotary evaporator). The crude products were purified by silica gel column chromatography using ethyl acetate/hexanes (4:1-1:1). All compounds were characterized by (MP, NMR, Mass, and IR) spectral data.18

Interested yet? This just the tip of the iceberg, You can reading other blog about 169037-23-4.

Reference:
Article; Kumar, G. Santosh; Ramesh, Palakuri; Kumar, A. Sanjeeva; Swetha; Meshram; Tetrahedron Letters; vol. 54; 37; (2013); p. 5048 – 5051;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Academic researchers, R&D teams, teachers, students, policy makers and the media all rely on us to share knowledge that is reliable, accurate and cutting-edge. category: indolines-derivatives

General procedure: A mixture of 5,6-dimethoxy-2-[(E)-1-arylmethylidene]-1-indanone (1, 0.364 mmol), thiazolidine-4-carboxylic (3, 0.364 mmol) and 1-morpholinoindoline-2,3-dione (2,0.364 mmol) was dissolved in methanol (1 mL) and irradiated for 2-3.5 min in a CEM microwave synthesizer (100 0C, 100 W). After completion of the reaction as evident from TLC, the mixture was poured into water. The precipitated solid was filtered and washed with water to afford the products 4a-i which was purified by recrystallisation.

According to the analysis of related databases, 169037-23-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Almansour, Abdulrahman I.; Ali, Sadath; Ali, Mohamed Ashraf; Ismail, Rusli; Choon, Tan Soo; Sellappan, Velmurugan; Elumalai, Karthi Keyan; Pandian, Suresh; Bioorganic and Medicinal Chemistry Letters; vol. 22; 24; (2012); p. 7418 – 7421;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In chemical reaction engineering, simulations are useful for investigating and optimizing a particular reaction process or system., HPLC of Formula: C9H4F3NO3

General procedure: A mixture of bisarylidenepiperidin-4-one (1.36 mmoL), isatin (2.72 mmoL) and L-phenylalanine (2.72 mmoL) were heated with stirring in [bmim]Br medium (3 mL) for 1 h at 100 C. After completion of the reaction (TLC), ethyl acetate (2 x 5 mL) was added and the reaction mixture was stirred for 10 min. The organic layer was removed under reduced pressure and the crude product was purified by column chromatography (ethyl acetate:hexane v/v 3:7). 5′-Benzyl-4′-(p-methoxyphenyl)-5-(trifluoromethoxy)spiro[3,2′]oxindolopyrrolidino-4′-(p-methoxyphenyl)-1?-styryl-5-benzylidene-spiro[3′.3?]piperidin-4?-one (5l): Melting point 270-272 C; White solid, 92%; 1H-NMR (CDCl3, 400 MHz): delta/ppm 5.00 (d, J = 14.64 Hz, 1H), 4.67-4.70 (m, 1H), 4.33 (d, J = 10.24 Hz, 1H), 3.86 (d, J = 13.92 Hz, 1H), 3.81 (s, 3H), 3.79 (s, 3H), 3.76 (d, J = 16.92 Hz, 1H), 3.47 (d, J = 15.4 Hz, 1H), 3.06 (d, J = 11.72 Hz, 1H), 2.75-2.79 (dd, J = 13.96, 8.08 Hz, 1H), 2.72 (d, J = 13.92 Hz, 1H), 6.59-6.66 (m, 2H), 7.14-7.63 (m, 21H, Ar); 13C-NMR (CDCl3, 100 MHz): delta/ppm 39.6, 47.3, 52.7, 53.1, 55.3, 55.4, 61.1, 67.3, 70.9, 100.8, 109.7, 114.1, 114.4, 121.1, 122.2, 124.7, 124.9, 126.5, 127.4, 128.5, 128.6, 128.7, 129.3, 129.9, 130.1, 130.4, 134.5, 136.9, 138.3, 138.5, 138.7, 139.8, 139.8, 144.4, 179.6, 197.2. EI-MS: m/z 771 (M+). Anal. Calcd for C46H40F3N3O5: C, 71.58; H, 5.22; N, 5.44. Found: C, 71.71; H, 5.34; N, 5.56.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 169037-23-4.

Reference:
Article; Arumugam, Natarajan; Almansour, Abdulrahman I.; Kumar, Raju Suresh; Govindasami, Periyasami; Al-thamili, Dhaifallah M.; Krishnamoorthy, Rajapandian; Periasamy, Vaiyapuri Subbarayan; Alshatwi, Ali A.; Mahalingam; Thangamani, Shankar; Menendez, J. Carlos; Molecules; vol. 23; 5; (2018);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 169037-23-4, Researchers are common within chemical engineering and are often tasked with creating and developing new chemical techniques, frequently combining other advanced and emerging scientific areas.

General procedure: A mixture of bisarylidenepiperidin-4-one (1.36 mmoL), isatin (2.72 mmoL) and L-phenylalanine (2.72 mmoL) were heated with stirring in [bmim]Br medium (3 mL) for 1 h at 100 C. After completion of the reaction (TLC), ethyl acetate (2 x 5 mL) was added and the reaction mixture was stirred for 10 min. The organic layer was removed under reduced pressure and the crude product was purified by column chromatography (ethyl acetate:hexane v/v 3:7). 5′-Benzyl-4′-(m-nitrophenyl)-5-(trifluoromethoxy)spiro[3,2′]oxindolopyrrolidino-4′-(m-nitrophenyl)-1?-styryl-5-benzylidene-spiro[3′.3?]piperidin-4?-one (5l): Melting point 296-298 C; white solid, 94%; 1H-NMR (CDCl3, 400 MHz): delta/ppm 5.05 (d, J = 14.64 Hz, 1H), 4.75-4.77 (m, 1H), 4.30 (d, J = 10.24 Hz, 1H), 3.86 (d, J = 13.92 Hz, 1H), 3.83 (d, J = 16.92 Hz, 1H), 3.49 (d, J = 15.4 Hz, 1H), 3.10 (d, J = 11.72 Hz, 1H), 2.73-2.77 (dd, J = 13.96, 8.08 Hz, 1H), 2.74 (d, J = 13.92 Hz, 1H), 7.01-6.68 (m, 2H), 7.18-7.82 (m, 21H,Ar); 13C-NMR (CDCl3, 100 MHz): delta/ppm 40.6, 47.4, 52.1, 53.3, 62.8, 65.6, 70.9, 98.8, 110.2, 121.9, 122.4, 122.5, 112.5, 123.6, 124.4, 124.5, 126.4, 126.5, 126.7, 128.7, 128.8, 128.9, 129.2, 129.4, 129.9, 132.4, 132.9, 135.6, 136.3, 137.7, 138.7, 139.9, 144.4, 179.8, 198.7. EI-MS: m/z 801 (M+). Anal. Calcd for C44H34F3N5O7: C, 65.91; H, 4.27; N, 8.73; Found: C, 65.99; H, 4.39; N, 8.86.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 5-(Trifluoromethoxy)indoline-2,3-dione.

Reference:
Article; Arumugam, Natarajan; Almansour, Abdulrahman I.; Kumar, Raju Suresh; Govindasami, Periyasami; Al-thamili, Dhaifallah M.; Krishnamoorthy, Rajapandian; Periasamy, Vaiyapuri Subbarayan; Alshatwi, Ali A.; Mahalingam; Thangamani, Shankar; Menendez, J. Carlos; Molecules; vol. 23; 5; (2018);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem