Category: 132898-96-5

Reference of 132898-96-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 132898-96-5 name is 2,3-Dioxoindoline-5-sulfonyl chloride, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Morpholine (1.1 mL, 12.2 mmol) was added to a solution of 2,3-diupsilonxoLndoline-5-sulfonyl chloride (3.0 g, 12.2 mmol) and diibopropylethyl amine (7,0 mL, 40 mmol) m 1 :1 CH2CWTHF ( 120 mL at -50 C. The solution was warmed to room temperature and stirred at that temperature for 12 hours. The reaction mixture was concentrated, then dissolved m CHjCl2. and washed with saturated NaHCO3 and brine. The organic layer was dried (MgSO4), filtered, then concentrated, and purified by flash chromatography on silica gel (5% MeOH in CH:CU) to provide 2.4 g of the product

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,3-Dioxoindoline-5-sulfonyl chloride, and friends who are interested can also refer to it.

Reference:
Patent; WYETH LLC (FORMERLY KNOWN AS WYETH); DOLLINGS, Paul, Jeffrey; DONNELL, Andrew, Forrest; GILBERT, Adam, Matthew; ZHANG, Minsheng; HARRISON, Boyd, Lynn; STANTON III, Charles, John; O’NEIL, Steven, Victor; HAVRAN, Lisa, Marie; CHONG, Dan, Chaekoo; WO2010/77839; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 132898-96-5, Safety of 2,3-Dioxoindoline-5-sulfonyl chloride

Step 2: Preparation of N, N-dimethyl-2,3-dioxoindoline-5-sulfonamide (148) To a mixture of 2,3-dioxoindoline-5-sulfonyl chloride (0.800 g, 3.26 mmol) in dry THF (10 ml), cooled at 0C under nitrogen, DI PEA (1 .138 ml, 6.51 mmol) and dimethylamine 2M in TH F (2.1 17 ml, 4.23 mmol) were added and the mixture was allowed to stir at room temperature for 2.5 hours. The mixture was partitioned between ethyl acetate and water, and the aqueous layer was extracted three times with ethyl acetate. The combined organic layers were dried over sodium sulfate and evaporated to dryness to give N ,N-dimethyl-2,3-dioxoindoline-5-sulfonamide (0.639 g, 2.51 mmol, 77% yield). MS/ESI+ 254.9 [MH] +.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,3-Dioxoindoline-5-sulfonyl chloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; CHIESI FARMACEUTICI S.P.A.; ARMANI, Elisabetta; AMARI, Gabriele; CAPALDI, Carmelida; CARZANIGA, Laura; LA PORTA, Elena; GUALA, Matilde; WO2013/57013; (2013); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 132898-96-5, These common heterocyclic compound, 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A stirred solution of N-Boc protected pyrrolidine (1.00 mmol) in dry DCM (2.2 mL) at 0 C under argon atmosphere was treated dropwise with TFA (10.00 mmol). Stirring was continued at 0 C for 30 min and at ambient temperature for 2 h. Subsequently, the solution was poured to ice-cooled 10% aq NaOH (15 mL) and extracted with DCM (3 ¡Á 15 mL). The combined organic phase was dried over MgSO4 and concentrated in vacuo to obtain a colorless oil as the corresponding unprotected pyrrolidine. After that a solution of the free pyrrolidine and DIPEA (2.00 mmol) in CHCl3 (1.1 mL) was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.50 mmol) in CHCl3/THF (1:1, 19 mL) at room temperature. The resulting solution was stirred at room temperature for 1 h and the solvent was completely removed in vacuo. The crude product was purified by flash column chromatography to obtain the corresponding inhibitors.

Statistics shows that 2,3-Dioxoindoline-5-sulfonyl chloride is playing an increasingly important role. we look forward to future research findings about 132898-96-5.

Reference:
Article; Limpachayaporn, Panupun; Schaefers, Michael; Schober, Otmar; Kopka, Klaus; Haufe, Guenter; Bioorganic and Medicinal Chemistry; vol. 21; 7; (2013); p. 2025 – 2036;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 132898-96-5, A common heterocyclic compound, 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, molecular formula is C8H4ClNO4S, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a stirred solution of the N-Boc-protected pyrrolidine (1.0 mmol) in dry DCM (3 mL) at 0 C under argon atmosphere, TFA (1.14 g, 10.0 mmol) was added dropwise. The obtained solution was stirred at 0 C for 30 min followed by stirring at r.t. for 2 h. Subsequently, the solution was poured to cold 10% aq. NaOH (15 mL) and extracted with DCM (3 ¡Á 15 mL). The combined organic phases were dried over MgSO4 and concentrated under reduced pressure resulting in the corresponding unprotected pyrrolidine, which was used in the next step without further purification. The free pyrrolidine (ca. 1 mmol) from the previous step was then taken up in CHCl3 (2.2 mL) and DIPEA (2.0 mmol) was added. The solution was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.5 mmol) in CHCl3/THF (1:1, 15 mL) at room temperature. The resulting mixture was stirred further for 1 h and the solvent was removed under reduced pressure. After purification by flash column chromatography the target isatin sulfonamide was obtained.

The synthetic route of 132898-96-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Limpachayaporn, Panupun; Riemann, Burkhard; Kopka, Klaus; Schober, Otmar; Schaefers, Michael; Haufe, Guenter; European Journal of Medicinal Chemistry; vol. 64; (2013); p. 562 – 578;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, molecular formula is C8H4ClNO4S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 132898-96-5

General procedure: A mixture of cis-N-benzyl-2,5-bis(methoxymethyl)pyrrolidine (18a) (620 mg, 2.49 mmol, 1.00 equiv.) and 10% Pd/C (62 mg, 10% w/w) in MeOH (12 mL) was stirred in an autoclave at ambient temperature under H2 atmosphere (20 atm) for 6 h. After this time, the mixture was filtered through Celite and washed again with MeOH. The solvent was removed under reduced pressure to obtain the corresponding unprotected bis(methoxymethyl)pyrrolidine as a light yellow oil. The solution of obtained free amine cis-2,5-bis(methoxymethyl)pyrrolidine and DIPEA (766 muL, 4.40 mmol, 2.00 equiv.) in CHCl3 (5 mL) was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.08 g, 4.40 mmol, 2.00 equiv.) in CHCl3/THF (1:1, 50 mL) at room temperature. The resulting mixture was stirred further for 2 h and concentrated under reduced pressure. The residue was purified by flash column chromatography (silica gel, 90% EtOAc in cyclohexane) to yield a yellow solid (723 mg, 1.96 mmol, 89%). M.p. 168 C. 1H NMR (400 MHz, DMSO-d6): delta = 11.46 (br s, 1H, 1-NH), 8.05 (dd, 3JH,H = 8.3 Hz, 4JH,H = 2.0 Hz, 1H, 6-CH), 7.80 (d, 4JH,H = 1.9 Hz, 1H, 4-CH), 7.09 (d, 3JH,H = 8.3 Hz, 1H, 7-CH), 3.73-3.58 (m, 2H, 12-CH, 15-CH), 3.52-3.20 (m, 4H, 16-CH2, 19-CH2), 3.37 (s, 6H, 18-CH3, 21-CH3), 1.78-1.62 (m, 2H, 13-CHa, 14-CHa), 1.57-1.37 (m, 2H, 13-CHb, 14-CHb) ppm. 13C NMR (100 MHz, DMSO-d6): delta = 182.9 (3-CO), 159.4 (2-CO), 153.6 (8-CN), 136.7 (6-CH), 130.8 (5-CSO2), 123.1 (4-CH), 118.1 (9-CCO), 112.7 (7-CH), 74.4 (2C, 16-CH2, 19-CH2), 59.9 (2C, 12-CH, 15-CH), 58.4 (2C, 18-CH3, 21-CH3), 26.9 (2C, 13-CH2, 14-CH2) ppm. HRMS (ESI+, MeOH): m/z = 391.0931 [M + Na]+, 423.1194 [M + Na + MeOH]+; calcd. 391.0934 for C16H20N2O6S + Na, 423.1196 for C16H20N2O6S + Na + MeOH.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 132898-96-5, its application will become more common.

Reference:
Article; Limpachayaporn, Panupun; Riemann, Burkhard; Kopka, Klaus; Schober, Otmar; Schaefers, Michael; Haufe, Guenter; European Journal of Medicinal Chemistry; vol. 64; (2013); p. 562 – 578;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 132898-96-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 132898-96-5 name is 2,3-Dioxoindoline-5-sulfonyl chloride, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A mixture of dimethylamine (2M solution in THF) (0.668 mmol, 1.3 eq) and DIPEA (0.139 g, 1.02 mmol, 2 eq) was added to a solution of rpm 121 (0.126 g, 0.514 mmol) in anhydrous THF (4 ml) at 0 0C under Ar. The reaction mixture was stirred overnight at room temperature, and the mixture was poured into water (5 ml). The product was extracted with ethyl acetate (3 x 10 ml). The organic extracts were collected, dried over Na2SO4 and the solvent removed under reduced pressure. The pure compound rpm 123 was obtained after trituration with ethyl acetate (5 ml) as a yellow solid (0.90 g, 0.354 mmol, 68%), mp 150- 152 0C (lit mp 233 0C.) 1H NMR (400 MHz, DMSO-d6) delta 2.60 (6H, s), 7.09 (IH, d, J 8.3 Hz), 7.68 (IH, d, J2.0 Hz), 7.91 (IH, dd, J 8.3, 2.0 Hz), 1 1.44 (IH, s).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,3-Dioxoindoline-5-sulfonyl chloride, and friends who are interested can also refer to it.

Reference:
Patent; UNIVERSITY OF SOUTH FLORIDA; H. LEE MOFFITT CANCER CENTER AND RESEARCH INSTITUTE, INC.; WO2007/117699; (2007); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 132898-96-5 as follows. Application In Synthesis of 2,3-Dioxoindoline-5-sulfonyl chloride

General procedure: To a stirred solution of the N-Boc-protected pyrrolidine (1.0 mmol) in dry DCM (3 mL) at 0 C under argon atmosphere, TFA (1.14 g, 10.0 mmol) was added dropwise. The obtained solution was stirred at 0 C for 30 min followed by stirring at r.t. for 2 h. Subsequently, the solution was poured to cold 10% aq. NaOH (15 mL) and extracted with DCM (3 ¡Á 15 mL). The combined organic phases were dried over MgSO4 and concentrated under reduced pressure resulting in the corresponding unprotected pyrrolidine, which was used in the next step without further purification. The free pyrrolidine (ca. 1 mmol) from the previous step was then taken up in CHCl3 (2.2 mL) and DIPEA (2.0 mmol) was added. The solution was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.5 mmol) in CHCl3/THF (1:1, 15 mL) at room temperature. The resulting mixture was stirred further for 1 h and the solvent was removed under reduced pressure. After purification by flash column chromatography the target isatin sulfonamide was obtained.

According to the analysis of related databases, 132898-96-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Limpachayaporn, Panupun; Riemann, Burkhard; Kopka, Klaus; Schober, Otmar; Schaefers, Michael; Haufe, Guenter; European Journal of Medicinal Chemistry; vol. 64; (2013); p. 562 – 578;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: indolines-derivatives

The hydrochloride salt of racemic 3-fluoropyrrolidinc (628 mg, 5mmol) was added to a solution of 2,3-oxoindohne-5-sulfonyl chloride (1.2 g, 4.9 mmol) and diisopropylethyl amine (2.6 mL, 15 mmol) in 1 :1 CH2Cl2ZTHF (50 mL) at -50 C. The solution was warmed to room temperature and slirred at that temperature for 12 hours. The reaction mixture was concentrated, dissolved in CII2CI2. and then washed with saturated NaHCO3 and brine. I he organic layer was dried (MgSO4), filtered, concentrated, and purified by flash chromatography on silica gel (5% MeOH in CH2Cl2) to provide 1.4 g of the product as an orange solid

The synthetic route of 2,3-Dioxoindoline-5-sulfonyl chloride has been constantly updated, and we look forward to future research findings.

Reference:
Patent; WYETH LLC (FORMERLY KNOWN AS WYETH); DOLLINGS, Paul, Jeffrey; DONNELL, Andrew, Forrest; GILBERT, Adam, Matthew; ZHANG, Minsheng; HARRISON, Boyd, Lynn; STANTON III, Charles, John; O’NEIL, Steven, Victor; HAVRAN, Lisa, Marie; CHONG, Dan, Chaekoo; WO2010/77839; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 132898-96-5, category: indolines-derivatives

T he hydrochloride salt of 3,3-difluoropyrrolidine (475 mg, 3,3 mmol) ^as added to a solution of2.3-dioxoiotando.me-5-suifonyl chloride (1 ,0 g, 4, 1 mmol) and diisopropyleth) 1 amine (2 0 ml, 12 mmol) in 1 : 1 CH2Cl2ZTHF (40 mL) at -50 C. The solution was warmed to room temperature and stirred at that temperature for 12 hours The reaction mixture was then concentrated, dissolved in CH2Cl2. and washed with saturated NaHCOj and brine. The organic layer was dried (MgSO4), filtered, concentrated, and purified by flash chromatography on silica gel (5% MeOH in CH2Cl2) to provide 575 mg of the product as an orange solid

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,3-Dioxoindoline-5-sulfonyl chloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; WYETH LLC (FORMERLY KNOWN AS WYETH); DOLLINGS, Paul, Jeffrey; DONNELL, Andrew, Forrest; GILBERT, Adam, Matthew; ZHANG, Minsheng; HARRISON, Boyd, Lynn; STANTON III, Charles, John; O’NEIL, Steven, Victor; HAVRAN, Lisa, Marie; CHONG, Dan, Chaekoo; WO2010/77839; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 132898-96-5, SDS of cas: 132898-96-5

General procedure: To a stirred solution of the N-Boc-protected pyrrolidine (1.0 mmol) in dry DCM (3 mL) at 0 C under argon atmosphere, TFA (1.14 g, 10.0 mmol) was added dropwise. The obtained solution was stirred at 0 C for 30 min followed by stirring at r.t. for 2 h. Subsequently, the solution was poured to cold 10% aq. NaOH (15 mL) and extracted with DCM (3 ¡Á 15 mL). The combined organic phases were dried over MgSO4 and concentrated under reduced pressure resulting in the corresponding unprotected pyrrolidine, which was used in the next step without further purification. The free pyrrolidine (ca. 1 mmol) from the previous step was then taken up in CHCl3 (2.2 mL) and DIPEA (2.0 mmol) was added. The solution was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.5 mmol) in CHCl3/THF (1:1, 15 mL) at room temperature. The resulting mixture was stirred further for 1 h and the solvent was removed under reduced pressure. After purification by flash column chromatography the target isatin sulfonamide was obtained.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,3-Dioxoindoline-5-sulfonyl chloride, and friends who are interested can also refer to it.

Reference:
Article; Limpachayaporn, Panupun; Riemann, Burkhard; Kopka, Klaus; Schober, Otmar; Schaefers, Michael; Haufe, Guenter; European Journal of Medicinal Chemistry; vol. 64; (2013); p. 562 – 578;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem