Category: 132898-96-5

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, This compound has unique chemical properties. The synthetic route is as follows., Formula: C8H4ClNO4S

To a slurry of 2,3-dioxomdoline-5-sulfonyl chloride (Lee, D. et al. J. Med. Chem. 2001, 44, 2015) (7,07 g, 28.8 mmol) m CH2Cl2 (288 mL) at rt was added neopentyl alcohol (7.61 g, 86.3 mmol) then pyridine (11.6 mL, 143 mmol). The reaction was stirred at rt for 22 hours, becoming a clear, oiange solution. The reaction was diluted with ILO (300 mL) and extracted with EtOAc (2 chi 600 mL). The combined organic extracts were washed with 0.1 M aqueous HCl (3 * 300 mL), saturated aqueous NaHCO3 (300 mL), and saturated aqueous NaCl (300 mL), then dried over Na2SO4, filtered, and concentrated in vacuo to provide the title compound as a yellow solid (6.40 g, 92%). 1H NMR (400 MHz, CDClj): consistent; MS (ES ) m’z 315.1 (,VHH2O)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 132898-96-5.

Reference:
Patent; WYETH LLC (FORMERLY KNOWN AS WYETH); DOLLINGS, Paul, Jeffrey; DONNELL, Andrew, Forrest; GILBERT, Adam, Matthew; ZHANG, Minsheng; HARRISON, Boyd, Lynn; STANTON III, Charles, John; O’NEIL, Steven, Victor; HAVRAN, Lisa, Marie; CHONG, Dan, Chaekoo; WO2010/77839; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 2,3-Dioxoindoline-5-sulfonyl chloride

(S)-5-(2-(4-Fluorophenoxymethyl)-pyrrolidine-1-sulfonyl)isatin (compound 20b). To a stirred solution of 19b (0.15 g, 0.5 mmol) in dry DCM (4 mL) cooled in an ice bath was added TFA (0.6 mL, 10 mmol). After 1 h bulk solvent was removed in vacuo and the residue remaining taken up in dry DCM (8 mL) and cooled in an ice bath. Dry triethylamine (1.5 mL) was then added followed by 5-chlorosulfonylisatin8 (0.16 g, 0.65 mmol) in dry THF (4 mL) and the solution was then stirred. After 19 h bulk solvent was removed in vacuo and redissolved in DCM (10 mL), washed with water (2*10 mL), then brine (1*10 mL) and dried over Na2SO4. Chromatography (hexanes/ethyl acetate) gave the desired product as an orange solid (104 mg, 51%). Mp: 205-207 C. HRMS (ESI)=405.0941 (M+H)+. Calcd. for C19H18FN2O5S 405.0920. 1H NMR (600 MHz, CDCl3) delta 8.10 (s, 1H), 8.08 (dd, J=8.4 Hz, J=1.8 Hz, 1H), 8.00 (br, 1H), 7.00 (d, J=7.8 Hz, 1H), 6.99-6.95 (m, 2H), 6.83-6.81 (m, 2H), 4.17 (dd, J=9.6 Hz, J=3.6 Hz, 1H), 3.98-3.95 (m, 1H), 3.91 (dd, J=9 Hz, J=7.8 Hz, 1H), 3.54-3.50 (m, 1H), 3.24-3.19 (m, 1H), 2.10-1.99 (m, 2H), 1.87-1.77 (m, 2H). TLC (UV254) Rf=0.27 (2:1 ethyl acetate/hexanes). HPLC tR=7.83

The synthetic route of 132898-96-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Imperial Innovations Limited; Hammersmith Imanet Limited; US2011/195024; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 132898-96-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 132898-96-5 name is 2,3-Dioxoindoline-5-sulfonyl chloride, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Step 1: 5-{[(2R)-2-(Methoxymethyl)pyrrolidin-1-yl]sulfonyl}-1H-indole-2,3-dione To a stirred cold suspension of 2,3-dioxo-2,3-dihydro-1H-indol-5-sulfonyl chloride (5.00 g, 20.4 mmol) in a 1:1 mixture of THF: CHCl3 (140 mL) was added dropwise, via syringe pump, a solution of N,N-diisopropylethylamine (7.11 mL, 40.8 mmol, 2 eq) and (R)-2-(Methoxymethyl)pyrrolidine (3.27 mL, 26.5 mmol, 1.3 eq) in CHCl3 (60 mL) over a period of 1.5 hours with cooling in an ice bath. After stirring an additional 1 h, the reaction was concentrated. The crude product was purified on Biotage KP silica gel eluding with 95/5 CH2Cl2/CH3OH followed by a second chromatography on silica gel eluding with EtOAc to give 4.21 g (63.8%) of the title compound. NMR (400 MHz, DMSO-d6): consistent.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,3-Dioxoindoline-5-sulfonyl chloride, and friends who are interested can also refer to it.

Reference:
Patent; Wyeth; US2005/250798; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 132898-96-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Step 1: 5′-({(2S)-2-[(Benzyloxy)methyl]pyrrolidin-1-yl}sulfonyl)-1H-indole-2,3-dione To a suspension of 2,3-dioxo-2,3-dihydro-1-H-indole-5-sulfonyl chloride (9.33 g, 38.0 mmol) in a 1:1 mixture of CHCl3:THF (410 mL) was added drop-wise a solution of (2S)-2-[(benzyloxy)methyl]pyrrolidine (8.00 g, 41.8 mmol, 1.1 eq) and N,N-diiso-propylethylamine (12.2 mL, 69.8 mmol, 1.8 eq) in chloroform (63 mL) over 1.25 hours with cooling in an ice bath under a dry N2 atmosphere. The reaction was complete (by TLC) after stirring for 1 hour at room temperature. The reaction was concentrated and purified on silica gel eluding with 50/50 Pet ether/EtOAc to give the title compound as a bright orange solid (11.8 g, 77.6% yield). NMR (400 MHz, DMSO-d6): consistent.

The synthetic route of 2,3-Dioxoindoline-5-sulfonyl chloride has been constantly updated, and we look forward to future research findings.

Related Products of 132898-96-5, These common heterocyclic compound, 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General Procedure: To a solution of 4 (1.32 g, 5 mmol) in CH2Cl2 (10 mL), trifloroacetic acid (10 mL) was added at 0 oC. The mixture was stirred at 0 oC for 15 min. After evaporation of the solvent in vacuo, CH2Cl2 (15 mL) and triethylamine (2 mL) were added, then a solution of 2,3-dioxoindoline-5-sulfonyl chloride (1.23g, 5mmol) in THF (25 mL) was added at 0 oC. The reaction mixture was stirred overnight at rt. Then the solvent was evaporated in vacuo, ethyl acetate (100 mL) was added, washed with water (50 mL x 2), saturated NaCl (50 mL), and dried over Na2SO4. After evaporation of the ethyl acetate, the crude product was purified by Flash column chromatograph with ethyl acetate to afford 1.27 g (68%) of 5.

The synthetic route of 132898-96-5 has been constantly updated, and we look forward to future research findings.

Adding a certain compound to certain chemical reactions, such as: 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 132898-96-5, Product Details of 132898-96-5

General procedure: To a stirred solution of the N-Boc-protected pyrrolidine (1.0 mmol) in dry DCM (3 mL) at 0 C under argon atmosphere, TFA (1.14 g, 10.0 mmol) was added dropwise. The obtained solution was stirred at 0 C for 30 min followed by stirring at r.t. for 2 h. Subsequently, the solution was poured to cold 10% aq. NaOH (15 mL) and extracted with DCM (3 × 15 mL). The combined organic phases were dried over MgSO4 and concentrated under reduced pressure resulting in the corresponding unprotected pyrrolidine, which was used in the next step without further purification. The free pyrrolidine (ca. 1 mmol) from the previous step was then taken up in CHCl3 (2.2 mL) and DIPEA (2.0 mmol) was added. The solution was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.5 mmol) in CHCl3/THF (1:1, 15 mL) at room temperature. The resulting mixture was stirred further for 1 h and the solvent was removed under reduced pressure. After purification by flash column chromatography the target isatin sulfonamide was obtained.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 132898-96-5 as follows. COA of Formula: C8H4ClNO4S

General procedure: To a stirred solution of the N-Boc-protected pyrrolidine (1.0 mmol) in dry DCM (3 mL) at 0 C under argon atmosphere, TFA (1.14 g, 10.0 mmol) was added dropwise. The obtained solution was stirred at 0 C for 30 min followed by stirring at r.t. for 2 h. Subsequently, the solution was poured to cold 10% aq. NaOH (15 mL) and extracted with DCM (3 ¡Á 15 mL). The combined organic phases were dried over MgSO4 and concentrated under reduced pressure resulting in the corresponding unprotected pyrrolidine, which was used in the next step without further purification. The free pyrrolidine (ca. 1 mmol) from the previous step was then taken up in CHCl3 (2.2 mL) and DIPEA (2.0 mmol) was added. The solution was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.5 mmol) in CHCl3/THF (1:1, 15 mL) at room temperature. The resulting mixture was stirred further for 1 h and the solvent was removed under reduced pressure. After purification by flash column chromatography the target isatin sulfonamide was obtained.

According to the analysis of related databases, 132898-96-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Limpachayaporn, Panupun; Riemann, Burkhard; Kopka, Klaus; Schober, Otmar; Schaefers, Michael; Haufe, Guenter; European Journal of Medicinal Chemistry; vol. 64; (2013); p. 562 – 578;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 132898-96-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 132898-96-5 name is 2,3-Dioxoindoline-5-sulfonyl chloride, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Step 1: 5-(Pyrrolidin-1-ylsulfonyl)-1H-indole-2,3-dione To a cold solution of 2,3-dioxo-2,3-dihydro-1H-indole-5-sulfonylchloride (2.00 g, 8.14 mmol) in a 1:1 mixture of THF: CHCl3 (96 mL) was added drop-wise via syringe pump over a period of 1 hr a solution of pyrrolidine (0.885 mL, 10.6 mmol) and N, N-diisopropylethyl amine (2.84 mL, 16.3 mmol, 2 eq) in chloroform (16 mL) under a dry N2 atmosphere with cooling in an ice bath. After stirring for 1 h., the reaction was concentrated. The crude product was purified on Biotage KP silica gel eluding with 80/20 CH2Cl2/EtOAc to give the title compound as a greenish-yellow solid (0.88 g, 39% yield). NMR (300 Mz, DMSO-d6): consistent. MS: (ES-) m/z 279 [M-H].

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,3-Dioxoindoline-5-sulfonyl chloride, and friends who are interested can also refer to it.

Reference:
Patent; Wyeth; US2005/250798; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 2,3-Dioxoindoline-5-sulfonyl chloride

Step 3: 5-({(2S)-2-[(4-methylpiperazin-1-yl)methyl]pyrrolidin-1-yl}sulfonyl)-1H-indole-2,3-dione The title compound was prepared from 2,3-dioxo-2,3-dihydro-1H-indole-5-sulfonylchloride and 1-methyl-4-[(2S)-pyrrolidin-2-ylmethyl]piperazine according to a procedure similar to that of step 1 of Example 12. NMR (400 Mz, DMSO-d6): consistent.

The synthetic route of 2,3-Dioxoindoline-5-sulfonyl chloride has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Wyeth; US2005/250798; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 132898-96-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 132898-96-5 name is 2,3-Dioxoindoline-5-sulfonyl chloride, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: To a stirred solution of the N-Boc-protected pyrrolidine (1.0 mmol) in dry DCM (3 mL) at 0 C under argon atmosphere, TFA (1.14 g, 10.0 mmol) was added dropwise. The obtained solution was stirred at 0 C for 30 min followed by stirring at r.t. for 2 h. Subsequently, the solution was poured to cold 10% aq. NaOH (15 mL) and extracted with DCM (3 ¡Á 15 mL). The combined organic phases were dried over MgSO4 and concentrated under reduced pressure resulting in the corresponding unprotected pyrrolidine, which was used in the next step without further purification. The free pyrrolidine (ca. 1 mmol) from the previous step was then taken up in CHCl3 (2.2 mL) and DIPEA (2.0 mmol) was added. The solution was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.5 mmol) in CHCl3/THF (1:1, 15 mL) at room temperature. The resulting mixture was stirred further for 1 h and the solvent was removed under reduced pressure. After purification by flash column chromatography the target isatin sulfonamide was obtained.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,3-Dioxoindoline-5-sulfonyl chloride, and friends who are interested can also refer to it.

Reference:
Article; Limpachayaporn, Panupun; Riemann, Burkhard; Kopka, Klaus; Schober, Otmar; Schaefers, Michael; Haufe, Guenter; European Journal of Medicinal Chemistry; vol. 64; (2013); p. 562 – 578;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem