Category: 132898-96-5

With the volume and accessibility of scientific research increasing across the world, it has never been more important to continue building the reputation for quality and ethical publishing we’ve spent the past two centuries establishing., Application of 132898-96-5

General procedure: To a stirred solution of the N-Boc-protected pyrrolidine (1.0 mmol) in dry DCM (3 mL) at 0 C under argon atmosphere, TFA (1.14 g, 10.0 mmol) was added dropwise. The obtained solution was stirred at 0 C for 30 min followed by stirring at r.t. for 2 h. Subsequently, the solution was poured to cold 10% aq. NaOH (15 mL) and extracted with DCM (3 × 15 mL). The combined organic phases were dried over MgSO4 and concentrated under reduced pressure resulting in the corresponding unprotected pyrrolidine, which was used in the next step without further purification. The free pyrrolidine (ca. 1 mmol) from the previous step was then taken up in CHCl3 (2.2 mL) and DIPEA (2.0 mmol) was added. The solution was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.5 mmol) in CHCl3/THF (1:1, 15 mL) at room temperature. The resulting mixture was stirred further for 1 h and the solvent was removed under reduced pressure. After purification by flash column chromatography the target isatin sulfonamide was obtained.

The synthetic route of 132898-96-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Limpachayaporn, Panupun; Riemann, Burkhard; Kopka, Klaus; Schober, Otmar; Schaefers, Michael; Haufe, Guenter; European Journal of Medicinal Chemistry; vol. 64; (2013); p. 562 – 578;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 132898-96-5

General procedure: To a stirred solution of the N-Boc-protected pyrrolidine (1.0 mmol) in dry DCM (3 mL) at 0 C under argon atmosphere, TFA (1.14 g, 10.0 mmol) was added dropwise. The obtained solution was stirred at 0 C for 30 min followed by stirring at r.t. for 2 h. Subsequently, the solution was poured to cold 10% aq. NaOH (15 mL) and extracted with DCM (3 × 15 mL). The combined organic phases were dried over MgSO4 and concentrated under reduced pressure resulting in the corresponding unprotected pyrrolidine, which was used in the next step without further purification. The free pyrrolidine (ca. 1 mmol) from the previous step was then taken up in CHCl3 (2.2 mL) and DIPEA (2.0 mmol) was added. The solution was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.5 mmol) in CHCl3/THF (1:1, 15 mL) at room temperature. The resulting mixture was stirred further for 1 h and the solvent was removed under reduced pressure. After purification by flash column chromatography the target isatin sulfonamide was obtained.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 132898-96-5.

Reference:
Article; Limpachayaporn, Panupun; Riemann, Burkhard; Kopka, Klaus; Schober, Otmar; Schaefers, Michael; Haufe, Guenter; European Journal of Medicinal Chemistry; vol. 64; (2013); p. 562 – 578;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

HPLC of Formula: C8H4ClNO4S,The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research.

General procedure: To a stirred solution of the N-Boc-protected pyrrolidine (1.0 mmol) in dry DCM (3 mL) at 0 C under argon atmosphere, TFA (1.14 g, 10.0 mmol) was added dropwise. The obtained solution was stirred at 0 C for 30 min followed by stirring at r.t. for 2 h. Subsequently, the solution was poured to cold 10% aq. NaOH (15 mL) and extracted with DCM (3 × 15 mL). The combined organic phases were dried over MgSO4 and concentrated under reduced pressure resulting in the corresponding unprotected pyrrolidine, which was used in the next step without further purification. The free pyrrolidine (ca. 1 mmol) from the previous step was then taken up in CHCl3 (2.2 mL) and DIPEA (2.0 mmol) was added. The solution was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.5 mmol) in CHCl3/THF (1:1, 15 mL) at room temperature. The resulting mixture was stirred further for 1 h and the solvent was removed under reduced pressure. After purification by flash column chromatography the target isatin sulfonamide was obtained.

According to the analysis of related databases, 132898-96-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Limpachayaporn, Panupun; Riemann, Burkhard; Kopka, Klaus; Schober, Otmar; Schaefers, Michael; Haufe, Guenter; European Journal of Medicinal Chemistry; vol. 64; (2013); p. 562 – 578;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In chemical reaction engineering, simulations are useful for investigating and optimizing a particular reaction process or system., name: 2,3-Dioxoindoline-5-sulfonyl chloride

(S)-5-(2-(4-Fluorophenoxymethyl)-pyrrolidine-1-sulfonyl)isatin (compound 20b). To a stirred solution of 19b (0.15 g, 0.5 mmol) in dry DCM (4 mL) cooled in an ice bath was added TFA (0.6 mL, 10 mmol). After 1 h bulk solvent was removed in vacuo and the residue remaining taken up in dry DCM (8 mL) and cooled in an ice bath. Dry triethylamine (1.5 mL) was then added followed by 5-chlorosulfonylisatin8 (0.16 g, 0.65 mmol) in dry THF (4 mL) and the solution was then stirred. After 19 h bulk solvent was removed in vacuo and redissolved in DCM (10 mL), washed with water (2*10 mL), then brine (1*10 mL) and dried over Na2SO4. Chromatography (hexanes/ethyl acetate) gave the desired product as an orange solid (104 mg, 51%). Mp: 205-207 C. HRMS (ESI)=405.0941 (M+H)+. Calcd. for C19H18FN2O5S 405.0920. 1H NMR (600 MHz, CDCl3) delta 8.10 (s, 1H), 8.08 (dd, J=8.4 Hz, J=1.8 Hz, 1H), 8.00 (br, 1H), 7.00 (d, J=7.8 Hz, 1H), 6.99-6.95 (m, 2H), 6.83-6.81 (m, 2H), 4.17 (dd, J=9.6 Hz, J=3.6 Hz, 1H), 3.98-3.95 (m, 1H), 3.91 (dd, J=9 Hz, J=7.8 Hz, 1H), 3.54-3.50 (m, 1H), 3.24-3.19 (m, 1H), 2.10-1.99 (m, 2H), 1.87-1.77 (m, 2H). TLC (UV254) Rf=0.27 (2:1 ethyl acetate/hexanes). HPLC tR=7.83

The synthetic route of 132898-96-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Imperial Innovations Limited; Hammersmith Imanet Limited; US2011/195024; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 132898-96-5,Some common heterocyclic compound, 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, molecular formula is C8H4ClNO4S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 2: 5-{[(2S)-2-(Methoxymethyl)pyrrolidin-1-yl]sulfonyl}-1H-indole-2,3-dione To a cold suspension of 2,3-dioxo-2,3-dihydro-1H-indole-5-sulfonylchloride (5.28 g, 21.5 mmol) in a 1:1 mixture of THF:CHCl3 (254 mL) was added drop-wise via syringe pump a solution of (S)-(+)-2-(methoxymethyl)-pyrrolidine (3.45 mL, 28.0 mmol, 1.3 eq) (Aldrich) and N,N-diisopropylethylamine (7.49 mL, 43 mmol, 2 eq) in CHCl3 (42 mL) over a period of 70 minutes under a dry N2 atmosphere with cooling in an ice bath. After stirring an additional 20 minutes the mixture was concentrated. The residue was flash chromatographed (Biotage KP silica gel, 98/2 CH2Cl2/CH3OH) to give the title compound as a dark greenish-yellow foam (6.48 g. 93% yield). NMR (400 MHz, DMSO-d6): consistent MS: (API-ES-) m/z 323[M-H].

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2,3-Dioxoindoline-5-sulfonyl chloride, its application will become more common.

Reference:
Patent; Wyeth; US2005/250798; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C8H4ClNO4S

To a stirred solution of 19b (0.15 g, 0.5 mmol) in dry DCM (4 mL) cooled in an ice bath was added TFA (0.6 mL, 10 mmol). After 1 h bulk solvent was removed in vacuo and the residue remaining taken up in dry DCM (8 mL) and cooled in an ice bath. Dry triethylamine (1.5 mL) was then added followed by 5-chlorosulfonylisatin8(0.16 g, 0.65 mmol) in dry THF (4 mL) and the solution was then stirred. After 19 h bulk solvent was removed in vacuo and redissolved in DCM (10 mL), washed with water (2×10 mL), then brine (1×10 mL) and dried over Na2SO4. Chromatography (hexanes/ethyl acetate) gave the desired product as an orange solid (104 mg, 51%).

The synthetic route of 132898-96-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; IMPERIAL INNOVATIONS LIMITED; HAMMERSMITH IMANET LIMITED; ABOAGYE, ERIC OFORI; SMITH, GRAHAM; NGUYEN, QUANG-DE; ARSTAD, ERIK; GLASER, MATTHIAS EBERHARD; (78 pag.)JP5667056; (2015); B2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 132898-96-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A stirred solution of N-Boc protected pyrrolidine (1.00 mmol) in dry DCM (2.2 mL) at 0 C under argon atmosphere was treated dropwise with TFA (10.00 mmol). Stirring was continued at 0 C for 30 min and at ambient temperature for 2 h. Subsequently, the solution was poured to ice-cooled 10% aq NaOH (15 mL) and extracted with DCM (3 × 15 mL). The combined organic phase was dried over MgSO4 and concentrated in vacuo to obtain a colorless oil as the corresponding unprotected pyrrolidine. After that a solution of the free pyrrolidine and DIPEA (2.00 mmol) in CHCl3 (1.1 mL) was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.50 mmol) in CHCl3/THF (1:1, 19 mL) at room temperature. The resulting solution was stirred at room temperature for 1 h and the solvent was completely removed in vacuo. The crude product was purified by flash column chromatography to obtain the corresponding inhibitors.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,3-Dioxoindoline-5-sulfonyl chloride, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Limpachayaporn, Panupun; Schaefers, Michael; Schober, Otmar; Kopka, Klaus; Haufe, Guenter; Bioorganic and Medicinal Chemistry; vol. 21; 7; (2013); p. 2025 – 2036;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 2,3-Dioxoindoline-5-sulfonyl chloride

Step 3: 8-{[(2S)-2-(Methoxymethyl)-2,3-dihydro-1H-indol-1-yl]sulfonyl}-3,3-dimethyl-3,4-dihydropyrimido[1,2-a]indol-10(2H)-one The title compound was prepared from 2,3-dioxo-2,3-dihydro-1H-indole-5-sulfonylchloride and (S)-2-methoxymethyl-2,3-dihydro-1H-indole as a yellow solid according to a procedure similar to that of Example 12. NMR (400 Mz, DMSO-d6): consistent. MS: (ES-) m/z 438 [M-H]. m.p.: 173.4-175.0 C.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 132898-96-5.

Reference:
Patent; Wyeth; US2005/250798; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 132898-96-5,Some common heterocyclic compound, 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, molecular formula is C8H4ClNO4S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1: N-Benzyl-N-methyl-2,3-dioxoindoline-5-sulfonamide To a black solution of 2,3-Dioxo-2,3-dihydro-1H-indole-5-sulfonylchloride (4.00 g, 16.3 mmol) in 1:1 THF:CHCl3 was added, drop-wise via syringe pump, a solution of N-benzylmethylamine (2.73 mL, 21.2 mmol, 1.3 eq) and N,N-diisopropylethylamine (5.68 mL, 32.6 mmol, 2 eq) in CHCl3 (32 mL) over a period of 1.25 hr. with cooling in an ice bath. After stirring for 50 min. the reaction was allowed to warm to room temperature and stirred for 30 minutes. The reaction was concentrated. The crude product was purified on Biotage KP silica gel eluding with 98/2 CHCl2/CH3OH to give the analytically pure sample of the title compound as a bright yellow solid (0.18 g, 15% yield). Anal. Calc’d for C16H14N2O4S: C, 58.17; H, 4.27; N, 8.48; Found: C, 57.88; H, 4.36; N, 8.40; MS: (API-ES-) m/z 329 [M-H]. m.p.: 183-185 C.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2,3-Dioxoindoline-5-sulfonyl chloride, its application will become more common.

Reference:
Patent; Wyeth; US2005/250798; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Some common heterocyclic compound, 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, molecular formula is C8H4ClNO4S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 2,3-Dioxoindoline-5-sulfonyl chloride

General procedure: A stirred solution of N-Boc protected pyrrolidine (1.00 mmol) in dry DCM (2.2 mL) at 0 C under argon atmosphere was treated dropwise with TFA (10.00 mmol). Stirring was continued at 0 C for 30 min and at ambient temperature for 2 h. Subsequently, the solution was poured to ice-cooled 10% aq NaOH (15 mL) and extracted with DCM (3 × 15 mL). The combined organic phase was dried over MgSO4 and concentrated in vacuo to obtain a colorless oil as the corresponding unprotected pyrrolidine. After that a solution of the free pyrrolidine and DIPEA (2.00 mmol) in CHCl3 (1.1 mL) was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.50 mmol) in CHCl3/THF (1:1, 19 mL) at room temperature. The resulting solution was stirred at room temperature for 1 h and the solvent was completely removed in vacuo. The crude product was purified by flash column chromatography to obtain the corresponding inhibitors.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 132898-96-5, its application will become more common.

Reference:
Article; Limpachayaporn, Panupun; Schaefers, Michael; Schober, Otmar; Kopka, Klaus; Haufe, Guenter; Bioorganic and Medicinal Chemistry; vol. 21; 7; (2013); p. 2025 – 2036;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem