Category: 13220-46-7

Adding a certain compound to certain chemical reactions, such as: 13220-46-7, name is 4-Methylindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 13220-46-7, Application In Synthesis of 4-Methylindolin-2-one

A mixture of 4-methylindolin-2-one (500 mg, 3.40 mmol), l-bromo-4-iodo- benzene (1.15 g, 4.06 mmol), Cul (500 mg, 2.63 mmol), L-PROLINE (310 mg, 2.69 mmol) and CsF (1.03 g, 6.78 mmol) in EtOAc (20 mL) was stirred at 50 C for 36 hours under N2 atmosphere. A black suspension was formed. TLC (PE/EtOAc = 3/1, Rf = 0.67) showed the starting material was consumed nearly. The reaction mixture was diluted with EtOAc/EEO (2/1, 100 mL) then separated. The aqueous was extracted with EtOAc (800 mL x3). The combined organic phase was concentrated. The residue was purified by Combi Flash (15% EtOAc in PE) to give l-(4-bromophenyl)-4-methylindolin-2-one (235 mg, yield: 23%) as a light yellow solid. NMR (400 MHz, CDCb) d 2.32 (3H, s), 3.60 (2H, s), 6.62 (1H, d, J= 8.0 Hz), 6.92 (1H, d, J= 7.6 Hz), 7.13 (1H, t , J= 8.0 Hz), 7.30 (2H, d, J= 8.4 Hz), 7.65 (2H, d , J= 8.2 Hz).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Methylindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; PETRA PHARMA CORPORATION; KESICKI, Edward A.; RAVI, Kannan Karukurichi; LINDSTROeM, Johan; PERSSON, Lars Boukharta; LIVENDAHL, Madeleine; VIKLUND, Jenny; GINMAN, Tobias; FORSBLOM, Rickard; RAHM, Fredrik; HICKEY, Eugene R.; DAHLGREN, Markus K.; GERASYUTO, Aleksey I.; (478 pag.)WO2019/126733; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 13220-46-7, These common heterocyclic compound, 13220-46-7, name is 4-Methylindolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4-Methyl-3-(3-methyl-1H-indol-2-ylmethylene)-1,3-dihydro-indol-2-one A mixture of 4-methyl-2-oxindole (147 mg) (prepared as described in Compound IN-015), 3-methyl-indole-2-carbaldehyde (190 mg) (prepared according to Synthetic Communications, 1986, 16, 1799) and piperidine (10 mg) in ethanol was heated in a sealed tube at 95 C. for 4 hours. The mixture was cooled to room temperature. The solid was collected by vacuum filtration, washed with cold ethanol and dried in vacuum oven for overnight to give 4-methyl-3-(3-methyl-1H-indol-2-ylmethylene)-1,3-dihydro-indol-2-one. 1H NMR (360 MHz, DMSO-d6) delta13.07 (s, br, 1H, NH), 11.0 (s, br, 1H, NH), 7.78 (s, 1H, H-vinyl), 7.64 (d, J=8 Hz, 1H), 7.51 (d, J=8 Hz, 1H), 7.27 (dt, J=1, 8 Hz, 1H), 7.04-7.12 (m, 2H), 6.85 (d, J=8 Hz, 1H), 6.78 (d, J=8 Hz, 1H), 2.64 (s, 3H, CH3), 2.52 (s, 3H, CH3). MS El 288.

Statistics shows that 4-Methylindolin-2-one is playing an increasingly important role. we look forward to future research findings about 13220-46-7.

Reference:
Patent; SUGEN, Inc.; US2002/183364; (2002); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

13220-46-7, name is 4-Methylindolin-2-one, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 4-Methylindolin-2-one

(S)-5-(2-Hydroxy-3-morpholin-4-yl-propyl)-3-methyl-4-oxo-1,4,5,6,7,8-hexahydro-pyrrolo[3,2-c]azepine-2-carbaldehyde 78f (40 mg, 0.12 mmol 1) and 4-methyl-1,3-dihydro-indol-2-one (18 mg, 0.12 mmol) were dissolved in 1.5 ml of ethanol, and added with 6mul of piperidine to the solution at room temperature. Upon completion of the addition, the reaction mixture was stirred at 45C for 16 hours. After thin lay chromatography showed the disappearance of starting materials, the reaction mixture was naturally cooled down to room temperature, and filtered. The filter cake was washed with anhydrous ethanol (1 ml¡Á2) and dried to obtain the title compound (S,Z)-5-(2-hydroxy-3-morpholinopropyl)-3-methyl-2-((4-methyl-2-oxoindolin-3-ylide ne)methyl)-5,6,7,8-tetrahydropyrrolo[3,2-c]azepin-4(1H)-one 83 (35 mg, yield 63.6%) as a yellow solid. MSm/z(ESI): 465.2(M+1) 1NMR(400 MHz, DMSO-d6) delta13.715(s, 1H, pyrrole-NH),10.934(s, 1H, indole-NH),7.572(s, 1H, -CH=C), 7.057 (t, 1H, -ArH), 6.840?6.821(d, 1H, -ArH), 6.790?6.771(d, 1H, -ArH), 4.737?4.725(d, 1H, -OH), 3.92(m, 1H, -CHOH), 3.75 (dd, 1H, seven-membered ring intra amide -NCH2), 3.58(t, 4H, morpholin2¡Á-CH2O), 3.441 (m, 2H, seven-membered ring -NCH2), 3.15(m, 1H, seven-membered ring outer amide-NCH2), 2.939(t, 2H, -CH2CH=C), 2.594(s, 3H, pyrrole-CH3), 2.426 (m, 4H, morpholin intra 2¡Á-CH2N), 2.388(s, 3H, pyrrole-CH3), 2.309?2.293(m, 2H, morpholin outer-NCH2), 2.078(m, 2H, seven-membered ring CH2-CH2-CH2)

The synthetic route of 13220-46-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shanghai Hengrui Pharmaceutical Co. Ltd.; EP2157093; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 13220-46-7, name is 4-Methylindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Safety of 4-Methylindolin-2-one

5-Iodo-4-methyl-2-oxindole To 2 g of 4-methyl-2-oxindole in 40 mL of glacial acetic acid in an ice bath was added 3.67 g N-iodosuccinimide. The mixture was stirred for 1 hour, diluted with 100 mL 50% acetic acid in water and filtered. The resulting white solid was dried under high vacuum to give 3.27 g (88% yield) of the title compound as an off-white solid.

According to the analysis of related databases, 13220-46-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SUGEN, Inc.; US2003/69421; (2003); A1;; ; Patent; Sugen, Inc.; US6051593; (2000); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 13220-46-7 as follows. name: 4-Methylindolin-2-one

Example 76 (R,Z)-5-(2-hydroxy-3-morpholinopropyl)-3-methyl-2-((4-methyl-2-oxoindolin-3-ylidene)methyl)-5,6,7,8-tetrahydropyrrolo[3,2-c]azepin-4(1H)-one 5-(2-Hydroxy-3-morpholin-4-yl-propyl)-3-methyl-4-oxo-1,4,5,6,7,8-hexahydro-pyrrolo[3,2-c]azepine-2-carbaldehyde 53f (30 mg, 0.09 mmol) and 4-methyl-1,3-dihydro-indol-2-one (12 mg, 0.08 mmol) were dissolved in 156 mul of ethanol, and added with 4.4 mul of piperidine to the solution at room temperature. Upon completion of the addition, the reaction mixture was stirred at 45 C. for 16 hours. After thin lay chromatography showed the disappearance of starting materials, the reaction mixture was naturally cooled down to room temperature, and filtered. The filter cake was washed with anhydrous ethanol (1 ml*2) and dried to obtain the title compound (R,Z)-5-(2-hydroxy-3-morpholinopropyl)-3-methyl-2-((4-methyl-2-oxoindolin-3-ylidene)methyl)-5,6,7,8-tetrahydropyrrolo[3,2-c]azepin-4(1H)-one 76 (12 mg, yield 30%) as a orange solid.

According to the analysis of related databases, 13220-46-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ChoTang, Peng Cho; Su, Yidong; Li, Yali; Zhang, Lei; Zhao, Fuqiang; Yang, Jialiang; Zhou, Ying; Bie, Pingyan; Qian, Guangtao; Ju, Minggang; US2010/75952; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 13220-46-7, name is 4-Methylindolin-2-one, A new synthetic method of this compound is introduced below., category: indolines-derivatives

5-Bromo-4-methyloxindole and 5,7-Dibromo-4-methyloxindole 4-Methyl-2-oxindole (5 g) in 40 mL of acetonitrile was treated with 7.26 g of N-bromosuccinimide and stirred at room temperature for 4 hours. Thin layer chromatography (ethyl acetate:hexane 1:2, silica gel) showed a mixture of 5-bromo (Rf 0.3) and 5,7-dibromo (Rf 0.5) products. Another 7.26 g of N-bromosuccinimide was added and the mixture stirred for 4 additional hours. The solid was collected by vacuum filtration, washed with 20 mL of acetonitrile and dried to give a 1:1 mixture of mono and dibromo compounds. The filtrate was concentrated and chromatographed on silica gel (ethyl acetate:hexane (1:2)) to give 1.67 g of 5-bromo-4-methyl-2-oxindole as a beige solid. The remaining 1:1 mixture of solids was recrystallized twice from glacial acetic acid to give 3.2 g of 5,7-dibromo-4-methyl-2-oxindole as a light orange solid. The filtrates from this material were chromatographed as above to give 0.6 g of 5-bromo-4-methyl-2-oxindole and 0.5 g of 5,7-dibromo-4-methyl-2-oxindole.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Sugen, Inc.; US6486185; (2002); B1;; ; Patent; Sugen, Inc.; US6114371; (2000); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

13220-46-7, name is 4-Methylindolin-2-one, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. SDS of cas: 13220-46-7

5-Bromo-4-methyloxindole and 5,7-Dibromo-4-methyloxindole 4-Methyl-2-oxindole (5 g) in 40 mL of acetonitrile was treated with 7.26 g of N-bromosuccinimide and stirred at room temperature for 4 hours. Thin layer chromatography (ethyl acetate:hexane 1:2, silica gel) showed a mixture of 5-bromo (Rf 0.3) and 5,7-dibromo (Rf 0.5) products. Another 7.26 g of N-bromosuccinimide was added and the mixture stirred for 4 additional hours. The solid was collected by vacuum filtration, washed with 20 mL of acetonitrile and dried to give a 1:1 mixture of mono and dibromo compounds. The filtrate was concentrated and chromatographed on silica gel (ethyl acetate:hexane (1:2)) to give 1.67 g of 5-bromo-4-methyl-2-oxindole as a beige solid. The remaining 1:1 mixture of solids was recrystallized twice from glacial acetic acid to give 3.2 g of 5,7-dibromo-4-methyl-2-oxindole as a light orange solid. The filtrates from this material were chromatographed as above to give 0.6 g of 5-bromo-4-methyl-2-oxindole and 0.5 g of 5,7-dibromo-4-methyl-2-oxindole.

The synthetic route of 13220-46-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SUGEN, Inc.; US2003/69421; (2003); A1;; ; Patent; Sugen, Inc.; US6051593; (2000); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 13220-46-7,Some common heterocyclic compound, 13220-46-7, name is 4-Methylindolin-2-one, molecular formula is C9H9NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a 25 mL round bottomed flask was added different substituted oxindoles 8 (0.2 mmol, 1.0 equiv.) and bromoethylsulfonium salt 9 (132.99 mg, 0.3 mmol, 1.5 equiv.), DMF (2 mL). The mixture was stirred at room temperature for 5min and Et3N (61.88 mg, 0.6 mmol, 3.0 equiv.) was added into reaction system. The mixture was stirred for 6h at room temperature until the reaction completed, quenched with saturated ammonium chloride solution (5 mL), and was extracted with EtOAc (3¡Á30 mL). The combined organic layer washed with H2O (2¡Á10 mL), dried with anhydrous sodium sulfate. After concentration, product was purified using column chromatography on silica gel with suitable eluent.

The synthetic route of 13220-46-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Qin, Hui; Miao, Yuanyuan; Zhang, Ke; Xu, Jian; Sun, Haopeng; Liu, Wenyuan; Feng, Feng; Qu, Wei; Tetrahedron; vol. 74; 47; (2018); p. 6809 – 6814;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 13220-46-7, name is 4-Methylindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 13220-46-7, name: 4-Methylindolin-2-one

5-Bromo-4-methyloxindole and 5,7-Dibromo-4-methyloxindole 4-Methyl-2-oxindole (5 g) in 40 ML of acetonitrile was treated with 7.26 g of N-bromosuccinimide and stirred at room temperature for 4 hours.. Thin layer chromatography (ethyl acetate:hexane 1:2, silica gel) showed a mixture of 5-bromo (Rf 0.3) and 5,7-dibromo (Rf 0.5) products.. Another 7.26 g of N-bromosuccinimide was added and the mixture stirred for 4 additional hours.. The solid was collected by vacuum filtration, washed with 20 ML of acetonitrile and dried to give a 1:1 mixture of mono and dibromo compounds.. The filtrate was concentrated and chromatographed on silica gel (ethyl acetate:hexane (1:2)) to give 1.67 g of 5-bromo-4-methyl-2-oxindole as a beige solid.. The remaining 1:1 mixture of solids was recrystallized twice from glacial acetic acid to give 3.2 g of 5,7-dibromo-4-methyl-2-oxindole as a light orange solid..

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Sugen, Inc.; US6350754; (2002); B2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 13220-46-7, name is 4-Methylindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 13220-46-7, Product Details of 13220-46-7

4-Methyl-2-oxindole (5 g) in 40 mL of acetonitrile was treated with 7.26 g of N-bromosuccinimide and stirred at room temperature for 4 hours. Thin layer chromatography (ethyl acetate:hexane 1:2, silica gel) showed a mixture of 5-bromo (Rf 0.3) and 5,7-dibromo (Rf 0.5) products. Another 7,26 g of N-bromosuccinimide was added and the mixture stirred for 4 additional hours. The solid was collected by vacuum filtration, washed with 20 mL of acetonitrile and dried to give a 1:1 mixture of mono and dibromo compounds. The filtrate was concentrated and chromatographed on silica gel (ethyl acetate:hexane (1:2)) to give 1.67 g of 5-bromo-4-methyl-2-oxindole as a beige solid. The remaining 1:1 mixture of solids was recrystallized twice from glacial acetic acid to give 3.2 g of 5,7-dibromo-4-methyl-2-oxindole as a light orange solid. The filtrates from this material were chromatographed as above to give 0.6 g of 5-bromo-4-methyl-2-oxindole and 0.5 g of 5,7-dibromo-4-methyl-2-oxindole

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Sugen, Inc.; US6878733; (2005); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem