Category: 118289-55-7

Reference of 118289-55-7, A common heterocyclic compound, 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one, molecular formula is C10H9Cl2NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 3 2 moles of Piperazine Benzisothiazole hydrochloride, 1 mole of 5-(2-chloroethyl)-6-chlorooxindole in water (20 times based on benzisothiazole) and in the presence of dispersing agent. All the reactants are charged in to the flask and refluxed under nitrogen, under stirring for 12-16 hr. After the completion of the reaction, the reaction mass is cooled to room temperature and the resulting mass is filtered. It is slurried in IPA and then in water and isolated by filtration. The solid is dried at 95-100 C.Yield: 90-92%, Purity 98% (min).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ALKEM LABORATORIES LIMITED; US2011/3995; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 118289-55-7, The chemical industry reduces the impact on the environment during synthesis 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one, I believe this compound will play a more active role in future production and life.

Example 15 5-(2-(4-(benzo[b]thiophen-4-yl)piperazin-1-yl)ethyl)-6-chloroindolin-2-one hydrochloride A mixture of 6-chloro-5-(2-chloroethyl)indolin-2-one (332 mg, 1.45 mmol), the product of Reference Example 1 (370 mg, 1.45 mmol), sodium carbonate (461 mg, 4.35 mmol), iodine sodium (216 mg, 1.45 mmol) and water (5 ml) was stirred under reflux for 24 hours. The reaction was cooled to room temperature, extracted with methylene chloride and water. The organic phase was dried over anhydrous sodium sulfate, filtered, concentrated and subjected to column chromatography to obtain an oil. Hydrogen chloride-ethanol solution was added thereto under stirring, the resulting salt was slurried in isopropanol, filtered to give a pale yellow solid (308 mg, yield: 51%). 1HNMR (400 MHz, DMSO-d6): delta ppm 11.04 (brs, 1H), 10.55 (s, 1H), 7.77 (d, 1H), 7.71 (d, 1H), 7.50 (d, 1H), 7.32 (t, 1H), 7.29 (s, 1H), 6.98 (d, 1H), 6.88 (s, 1H), 3.71 (d, 2H), 3.57 (d, 2H), 3.50 (s, 2H), 3.38 (m, 4H), 3.21 (m, 4H). ESI-MS (m/z): 412.2 [M+H]+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Chloro-5-(2-chloroethyl)indolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SHANGHAI INSTITUTE OF MATERIA MEDICA, CHINESE ACADEMY OF SCIENCES; SUZHOU VIGONVITA LIFE SCIENCES CO., LTD.; TOPHARMAN SHANDONG CO., LTD.; JIANG, Hualiang; WANG, Zhen; LI, Jianfeng; ZHANG, Rongxia; HE, Yang; LIU, Yongjian; BI, Minghao; LIU, Zheng; TIAN, Guanghui; CHEN, Weiming; YANG, Feipu; WU, Chunhui; WANG, Yu; JIANG, Xiangrui; YIN, Jingjing; WANG, Guan; SHEN, Jingshan; (70 pag.)US2017/158680; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 118289-55-7, Quality Control of 6-Chloro-5-(2-chloroethyl)indolin-2-one

8. Preparation of ZPR in glycerol by Na C03 portion-wise addition To a three necked flask was charged BITP HC1 (15g), CEI (16. 2g), glycerol (60ml) and Na2C03 (3. 11 g, 0. 5mol). The reaction mixture was heated at 115 C and after 15′ a new portion of 0.12 mol Na2C03 was added. The heating was continued by addition of 0.12 mol base each hour. After 5 hours the base addition was completed and the reaction mixture was heated for an additional hour. After cooling to room temperature, the mixture was diluted with water (120ml) and after 1 hour stirring the product crude was filtrated, washed with water and dried at 50C to afford 25.7g dried product (yield 82. 4%) (purity by HPLC 94%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Chloro-5-(2-chloroethyl)indolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; TEVA PHARMACEUTICAL INDUSTRIES LTD.; TEVA PHARMACEUTICALS USA, INC.; WO2005/40160; (2005); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 118289-55-7, Recommanded Product: 6-Chloro-5-(2-chloroethyl)indolin-2-one

5-(2-(4-(1,2-benzisothiazol-3-yl)-piperazinyl)ethyl)-6-chloro-1,3-dihydro-2H-indol-2-one A clean and dry 20-gallon glass lined tank was charged with 19 L of water and 4.44 Kg of sodium carbonate, after the carbonate had dissolved 4.29 Kg (17.5 moles) of 5-(2-chloroethyl)-6-chloro-oxindole and 3.62 Kg (1 6.5 moles) of 1-(1,2-benzisothiazol-3-yl) piperazine were added. The aqueous slurry was heated to reflux and the temperature maintained for 14 hours. When the reaction was complete the solution was cooled to 20 C. and filtered. The wet product was reslurried in 23 L of isopropyl alcohol at room temperature for 2 hours. The product was collected by filtration on 2 large Buchner funnels, each was washed with 3.4 L of fresh isopropyl alcohol. The product was vacuum dried at 30 to 40 C. until no isopropyl alcohol remained, giving 5.89 Kg (86.4% yield) of the desired free base which matched a standard sample by high performance liquid chromatography (HPLC).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 6-Chloro-5-(2-chloroethyl)indolin-2-one, and friends who are interested can also refer to it.

Reference:
Patent; Pfizer Inc.; US5312925; (1994); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 118289-55-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Example 5Preparation of 5-[2-[4-(l,2-benzisothiazol-3-yl)-l-piperazinyn]ethyl]-6- chloro-l,3-di hydro-2H- indol-2-one:Charge 1.0 litre water, 100 gm of 5-(2-chloroethvl)-6-chlorooxindole product, 122.4 gm 3-(l-piperazinyl)-l,2-benzisothiazole HCI and 138.2 gm of sodium carbonate into a 3 litre three neck flask at 25 to 30 C. Stir for 15 minutes and heat to reflux temperature 95 to 100 C. Maintain at reflux temperature for 15 hrs. Cool the reaction mixture to 45 – 50C. Add 1.0 It of water into the reaction mixture and stir for 30 minutes. Filter at 45 to 50 C and wash with water. Suck dry for 30 minutes to yield crude product. Charge 2 It of water and above crude product and heat the mixture gradually to 45 to 50C and stir for 30 minutes. Filler the product at 45 to 50C and wash with water. Suck dry the product for 30 minutes. Charge 2.0 It of water and 300 gm of crude product into a 1.0 litre three neck flask at 25 to 30C and heat the mixture gradually to 45 to 50C. Stir for 30 mins. Filter the product at 45 to 50C and wash with water till about neutral pH (6.5 to 7.0). Suck dry the product for 30 minutes to get wet crude base 5-[2-[4-(l,2-benzisothiazo.-3-yl)-l-piperazinyl]ethylj-6- chloro-i,3-di hydro- 2H- indol-2-one. Add 300.-gms of wet crude base and 1.0 It of isopropanol at 25 to 30C. Warm the reaction mixture to 50 to 55C and stir for 1.0 hr. Cool the reaction mixture gradually to 10 to 15C and stir for 30 mins. Filter the product and wash with chilled isopropanol. Suck dry for 30 minutes. Charge 300gm of wet crude base and 6 It of tetrahydrofuran (THF). Heat the reaction mixture gradually to reflux temperature 65-70C. Reflux till clear solution. Cool to 50 to 55C and add charcoal and stir for 30 min at 50 to 55dC. Filter the charcoal and wash with hot THF. Distill out THF at 50 to 55 C under vacuum till residual volume is 1 It and cool the reaction mixture gradually to 5 to 10C and stir for 1 hr. Filter the product and wash with chilled THF. Suck dry the product for 30 minutes. Dry the product at 60 to 65C.

The synthetic route of 6-Chloro-5-(2-chloroethyl)indolin-2-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARCH PHARMALABS LIMITED; GHOGARE, Bhausaheb Nana; DESHPANDE, Uday K.; PAI, Ganesh Gurpur; MANDAL, Arun Kanti; CHARANJIT, Sehgal; NEHA, Dixit Akshaya; WO2012/20424; (2012); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 118289-55-7, COA of Formula: C10H9Cl2NO

General procedure: Equimolar mixture of 6-chloro-5-(2-chloroethyl)-1,3-dihydro-2H-indol-2-one 1 (1.00mol) and the carbonyl compound (4i-x) (1.00mol) was stirred at RT in methanol (10mL) for 2h in presence of potassium carbonate (1.20mol). After completion, the reaction mass was filtered to remove inorganic salt, added methanol (10-20mL) and activated charcoal to the filtrate and stirred for 1hr. The crude product was filtered to remove charcoal, methanol was evaporated and cooled to 0-5C to get crude solid. Recrystallized using aqueous ethanol or methanol (Yield 60-70%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Meti, Gangadhar Y.; Kamble, Atulkumar A.; Kamble, Ravindra R.; Somagond, Shilpa M.; Devarajegowda; Kumari, Sandhya; Kalthur, Guruprasad; Adiga, Satish K.; European Journal of Medicinal Chemistry; vol. 121; (2016); p. 221 – 231;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one, A new synthetic method of this compound is introduced below., category: indolines-derivatives

General procedure: A mixture of 6-chloro-5-(2-chloroethyl)-1,3-dihydro-2H-indol-2-one 1 (1.00mol), potassium carbonate (1.20mol), secondary amine (2a-h, 1.30mol) in water (10mL) was refluxed until completion (TLC, about 24-48h) and the reaction mass was cooled to RT and then extracted with DCM to get crude 3a-h. Recrystallized using aqueous acetone or aqueous ethanol or methanol (Yield 55-70%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Meti, Gangadhar Y.; Kamble, Atulkumar A.; Kamble, Ravindra R.; Somagond, Shilpa M.; Devarajegowda; Kumari, Sandhya; Kalthur, Guruprasad; Adiga, Satish K.; European Journal of Medicinal Chemistry; vol. 121; (2016); p. 221 – 231;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 118289-55-7, A common heterocyclic compound, 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one, molecular formula is C10H9Cl2NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 5 Preparation of 5- [2- [4- (1, 2- benzisothiazol-3-yl) -1-piperazinyl] ethyl] -6-chloro-1, 3-dihydro-2H-indol-2-one (Ziprasidone base) Example 2 was repeated with the exception that 10 ml of 1-butyl-3-methylimidazolium bromide was used instead of 8 ml of 1-ethyl-3-methylimidazolium methyl sulfate. After the completion of the reaction the presence of 5- [2- [4- (1, 2- benzisothiazol-3-yl) -1-piperazinyl] ethyl] -6-chloro-1, 3- dihydro-2H-indol-2-one was confirmed by HPLC.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; KRKA; EP1889844; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 118289-55-7 as follows. category: indolines-derivatives

Example 1; Methylene chloride (200 ml) is added to 1-(1 ,2-Benzisothiazol-3- yl)piperazine (15 gm), stirred for 10 minutes and then triethylamine (22 ml) is added drop wise for 10 minutes. Trimethylsilyl chloride (15 ml) is added drop wise to the reaction mass for 20 minutes, tetrabutyl ammonium bromide (5 gm) is added and stirred for 1 hour at 25-300C. Then the reaction mass is heated to 400C and methylene chloride is distilled under vacuum. To this reaction mass sodium carbonate (16 gm) and 5-(2-chloroethyl)-6-chloro-oxindole (16 gm) are added, stirred for 10 minutes and added water (400 ml) and sodium iodide (2 gm). The contents are heated to 1000C and stirred for 7 hours 30 minutes at 95 – 1000C. Solid is filtered and slurried in 200 ml of water, filtered and washed with water (100 ml). Then the solid is slurried in isopropyl alcohol (75 ml) at reflux, refluxed for 1 hour and then filtered the solid at reflux point to give 15 gm of ziprasidone (HPLC purity: 98.36%).

According to the analysis of related databases, 118289-55-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; HETERO DRUGS LIMITED; WO2006/80025; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 118289-55-7, These common heterocyclic compound, 118289-55-7, name is 6-Chloro-5-(2-chloroethyl)indolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Equimolar mixture of 6-chloro-5-(2-chloroethyl)-1,3-dihydro-2H-indol-2-one 1 (1.00mol) and the carbonyl compound (4i-x) (1.00mol) was stirred at RT in methanol (10mL) for 2h in presence of potassium carbonate (1.20mol). After completion, the reaction mass was filtered to remove inorganic salt, added methanol (10-20mL) and activated charcoal to the filtrate and stirred for 1hr. The crude product was filtered to remove charcoal, methanol was evaporated and cooled to 0-5C to get crude solid. Recrystallized using aqueous ethanol or methanol (Yield 60-70%).

The synthetic route of 118289-55-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Meti, Gangadhar Y.; Kamble, Atulkumar A.; Kamble, Ravindra R.; Somagond, Shilpa M.; Devarajegowda; Kumari, Sandhya; Kalthur, Guruprasad; Adiga, Satish K.; European Journal of Medicinal Chemistry; vol. 121; (2016); p. 221 – 231;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem