Category: 104618-31-7

Application of 104618-31-7, These common heterocyclic compound, 104618-31-7, name is 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of 7-bromoquinoxalin-5-ol (47.53 g, 211.2 mmol), 2-(4- hydroxycyclohexyl)isoindoline-l,3-dione (52.41 g, 213.7 mmol), and PPh3 (87.31 g, 332.9 mmol) in THF (740 mL) at 21 C was added tert-butyl (NZ)-N-tert- butoxycarbonyliminocarbamate (DTBAD) (79.51 g, 328.0 mmol) in portions over 40 min so as to maintain the temperature below 30 C and the resultant reaction mixture was stirred at room temperature for a further 20 h. The reaction was evaporated in vacuo. The residual reddish-brown viscous oil was dissolved in CH2C12 and filtered through a plug of silica in a glass column using applied air pressure (plug was made with 1L of dry silica suspended in CH2C12). The plug was eluted with CH2C12, the fractions were combined and evaporated in vacuo to afford a red-brown viscous oil/foam, that was then dissolved in 700 mL of MeOH before precipitating. The mixture was stirred at room temperature for 1 h, filtered, washed with cold MeOH (500 mL) and Et20 (100 mL), then dried in vacuo to yield a tan solid that was suspended in 300 mL MeOH and brought to reflux for 10 min. The suspension was cooled to room temperature and filtered, washed with a further MeOH and Et20 (4: 1), and dried in vacuo to provide 2-[4-(7- bromoquinoxalin-5-yl)oxycyclohexyl]isoindoline-l,3-dione (58.43 g, 126.6 mmol, 59.94%). 1H NMR (400 MHz, CDC13) d 8.96 (d, J = 1.8 Hz, 1H), 8.86 (d, J = 1.8 Hz, 1H), 7.91 (d, J = 1.9 Hz, 1H), 7.89 – 7.82 (m, 2H), 7.78 – 7.67 (m, 2H), 7.30 (d, J = 1.9 Hz, 1H), 4.95 (s, 1H), 4.29 (tt, J = 12.5, 3.7 Hz, 1H), 2.87 (qd, J = 13.1, 3.5 Hz, 2H), 2.44 (d, J = 15.2 Hz, 2H), 1.80 (t, J = 14.1 Hz, 2H), 1.67 (d, 2H). ESI-MS m/z calc. 451.05316, found 452.19 (M+l)+; Retention time: 0.92 minutes.

Statistics shows that 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione is playing an increasingly important role. we look forward to future research findings about 104618-31-7.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; WEINBERG, Marc, Saul; D’ASTOLFO, Diego, Sebastian; MAHAJAN, Sudipta; (258 pag.)WO2019/143675; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 104618-31-7, name is 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 104618-31-7, Recommanded Product: 104618-31-7

To a solution of PPh3 (1.28 g, 4.9 mmol) in THF (12 mL) was added dropwise DEAD (852 mg, 4.9 mmol) at -10 C. After the white solid was appeared, compound 2-(4-hydroxycyclohexyl)isoindoline-1,3-dione (600 mg, 2.45 mmol) was added, followed by CH3COSH (0.35 mL, 4.9 mmol) at -10 C. The mixture was stirred at room temperature overnight. TLC (PE:EA=1:1) showed the reaction was complete. The mixture was poured into water (200 mL) and extracted with EtOAc (100 mL). The aqueous layer was extracted with EtOAc (100 mL×3). The combined extracts were dried over Na2SO4, filtered and concentrated in vacuo to give S-(4-(1,3-dioxoisoindolin-2-yl)cyclohexyl) ethanethioate (600 mg, 81%) as a white solid.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione, and friends who are interested can also refer to it.

Reference:
Patent; Tolero Pharmaceuticals, Inc.; Xu, Yong; Brenning, Benjamin Gary; Kultgen, Steven G.; Liu, Xiaohui; Saunders, Michael; Ho, Koc-Kan; (119 pag.)US9416132; (2016); B2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 104618-31-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 104618-31-7, name is 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione, This compound has unique chemical properties. The synthetic route is as follows.

The title compound from Step A above (28 g, 114 mmol) was dissolved in dichloromethane (990 mL) and pyridinium chlorochromate (33.6 g, 157 mmol) was added in portions. The reaction mixture was stirred at room temperature for 8 h. Then another batch of pyridinium chlorochromate (10.4 g, 48.6 mmol) was added in portions and stirring at room temperature was continued for 18 h. The reaction mixture was filtered through a pad of Celite and the Celite pad was washed with dichlormethane (400 mL). The combined filtrate was concentrated under reduced pressure and the residue was purified by chromatography on silica using ethyl acetate/n-heptane (60/40) as a mobile phase to afford the title compound as a white solid (24.62 g, 88%)1H-NMR (400 MHz, CDCl3): delta=2.17-2.24 (m, 2H), 2.60-2.71 (m, 4H), 2.80-2.90 (m, 2H), 4.78 (tt, 1H), 7.84-7.88 (m, 2H), 7.97-8.02 (m, 2H)

The chemical industry reduces the impact on the environment during synthesis 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione. I believe this compound will play a more active role in future production and life.

Reference:
Patent; AC Immune, S.A.; US2011/280808; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 104618-31-7, name is 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione, A new synthetic method of this compound is introduced below., category: indolines-derivatives

190gms(0.7755mole) 4-phthalimido cyclohexanol are dissolve in 1480ml chloroform.Add solution of H2SO4 (435.87gm, 4.4476mole cone. H2SO4 was added in 900 mlwater). Cool mass to 25C,add lot wise 180.5gm(0.6139mole) potassium dichromate inone hour. Stir mass for three hours, add 900 ml water and separate organic phase.Organic phase was washed with water and 2% NaHCO3 solution, after drying andconcentration of extracts product was isolated by adding methanol and water mixture.YIELD: 175g(92.4%)PURITY: 96.01%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ALEMBIC LIMITED; WO2006/3677; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 104618-31-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 104618-31-7, name is 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

(b) 4-(Phthalimido)-cyclohexanone 95 g (0.388 Mol) of 4-(phthalimido)cyclohexanol are dissolved in 600 ml of chloroform and, after the addition of 450 ml of water and 120 ml of sulfuric acid, 90 g (0.3 Mol) of potassium dichromate are added in batches. The internal temperature of the mixture is maintained at between 25 and 30 C. by slight cooling. The mixture is stirred for a further 3 hours, then the chloroform phase is separated of and the mixture extracted twice more with chloroform. After drying and concentration of the extracts 82 g (86.9% of theory) are obtained.

The synthetic route of 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Dr. Karl Thomae GmbH; US4731374; (1988); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 104618-31-7, The chemical industry reduces the impact on the environment during synthesis 104618-31-7, name is 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione, I believe this compound will play a more active role in future production and life.

190gms(0.7755mole) 4-phthalimido cyclohexanol are dissolve in 1480ml chloroform.Add solution of H2SO4 (435.87gm, 4.4476mole cone. H2SO4 was added in 900 mlwater). Cool mass to 25C,add lot wise 180.5gm(0.6139mole) potassium dichromate inone hour. Stir mass for three hours, add 900 ml water and separate organic phase.Organic phase was washed with water and 2% NaHCO3 solution, after drying andconcentration of extracts product was isolated by adding methanol and water mixture.YIELD: 175g(92.4%)PURITY: 96.01%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ALEMBIC LIMITED; WO2006/3677; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 104618-31-7, name is 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione, A new synthetic method of this compound is introduced below., Safety of 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione

Step 2 A solution of 2-(4-hydroxycyclohexyl)-1H-isoindole-1,3(2H)-dione (3.10 g, 12.6 mmol) in CH2Cl2 (25.0 mL) was added to a slurry of PCC (4.10 g, 19.0 mmol) in CH2Cl2 (15.0 mL) and stirred at room temperature for 3.5 hours. The reaction was diluted with Et2O (60.0 mL), decanted and the residue swirled with Et2O (2*40.0 mL). The combined ether layers were filtered through florisil and concentrated in vacuo to dryness, and the residue was recrystallized from ethyl acetate/hexane to give 2.01 g (65%) of 2-(4-oxocyclohexyl)-1H-isoindole-1,3(2H)-dione as colorless needles: mp 140.3-142.1 C.; 1H NMR (400 MHz, CDCl3) delta7.84, 7.74, 4.64, 2.72, 2.54, 2.09; 13C NMR (100 MHz, CDCl3) delta208.9, 168.1, 134.1, 131.9, 123.3, 48.4, 39.9, 28.6; IR (mull) 3062, 3031, 2958, 2949, 2919, 2885, 1775, 1762, 1721, 1708, 1611, 1465, 1436, 1419, 1393, 1379, 719 cm-1; HRMS (FAB) calcd for C14H14NO3: 244.0974, found 244.0976; Anal. Calcd for C-14H14NO3: C, 69.12; H, 5.39; N, 5.76. Found: C, 68.87; H, 5.47; N, 5.73.

The synthetic route of 104618-31-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Fu, Jian-Min; US2003/100596; (2003); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 104618-31-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 104618-31-7, name is 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

4-[4-(1,3-Dioxo-1 , 3-dihydro-isoindol-2-yl)-cyclohexyloxy]-benzoic acid ethyl ester; To a stirred solution of 2-(4-hydroxycyclohexyl)isoindole-1 ,3-dione (8.0 g, 32.6 mmol) in dry THF (100 ml.) was added triphenyl phosphine (12.8 g, 48.8 mmol) and 4- hydroxy benzoic acid ethyl ester (5.44 g, 32.7 mmol). The reaction mixture was cooled to 0 0C and DIAD (9.6 g, 47.4 mmol) was added dropwise from an addition funnel over a period of 3 h. The reaction was gradually brought to room temperature and stirring continued for 3 h. The solvent was removed under vacuum and ether (100 ml.) was added and cooled to 0 0C. The solid formed was filtered and the clear filtrate concentrated and purified by column chromatography over neutral alumina (8 % AcOEt in hexane) to give 5.13 g (42 %) of 4-[4- (I .S-dioxo-I .S-dihydro-isoindol^-ylJ-cyclohexyloxyJ-benzoic acid ethyl ester. 1H-NMR (300 MHz, CDCI3); delta 1.24 – 1.36 (m, 2H), 1.40 (t, 3H), 1.63 – 1.77 (m, 3H), 2.19 – 2.29 (m, 2H), 2.62 – 2.79 (dq, 2H), 4.15 – 4.72 (m, 1 H), 4.35 (q, 2H), 7.01 (d, 2H), 7.71 (m, 2H), 7.82 (m, 2H), 8.0 (d, 2H). m/z: 394.1 (M+1 )+

The synthetic route of 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVO NORDISK A/S; WO2007/115935; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 104618-31-7, name is 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 104618-31-7, HPLC of Formula: C14H15NO3

A solution of 4-phthalimido cyclohexanol (7.1 g, 0.029 mole) in dichloromethane (250 ml) was treated with pyridinium chlorochromate (8.6 g, 0.04 mole) and the resulting dark mixture was stirred at room temperature overnight. Diethyl ether (50 ml) was added and the mixture filtered through keiselguhr. The filtrate was concentrated in vacuo and the residue purified by column chromatography (SiO2; CHCl3/EtOAc) to give 4-phthalimido cyclohexanone as a white solid (6.4 g).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione, and friends who are interested can also refer to it.

Reference:
Patent; SMITHKLINE BEECHAM PLC; EP603432; (1994); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 104618-31-7, name is 2-(4-Hydroxycyclohexyl)isoindoline-1,3-dione, A new synthetic method of this compound is introduced below., HPLC of Formula: C14H15NO3

General procedure: A round-bottom flask was charged with the corresponding alcohol (1.0 equiv) followed by the addition of Et2O (0.1 M). The solution was cooled to 0 C. Next, oxalyl chloride (2.0 equiv) was added dropwise. The homogeneous reaction mixture was allowed to warm to ambient temperatureand stir for 1-18 h. The reaction was cooled to 0 C and quenched by slow addition of H2O (100.0 equiv). After stirring for 1 h at room temperature, the resulting mixture was transferred to a separatory funnel, and the aqueous layer mixture was extracted with three portions of Et2O. The combined organic layers were washed with brine, dried over MgSO4, filtered, and concentrated under reduced pressure affording the desired oxalic acid. All the oxalates were used without further purification.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Gonzalez-Esguevillas, Maria; Miro, Javier; Jeffrey, Jenna L.; MacMillan, David W.C.; Tetrahedron; vol. 75; 32; (2019); p. 4222 – 4227;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem