Author: tianli

Adding a certain compound to certain chemical reactions, such as: 20870-78-4, name is 5-Bromoindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 20870-78-4, 20870-78-4

A. 5-(4,4,5,5-Tetramethyl-l ,3>2-dioxaborolan-2-yl)indolin-2-one. Bis(pinacolato)diboron (1.31 g, 4.71 mmol), dichloro[l,l’-bis(diphenylphosphino) ferrocenejpalladium (II) dichloro-methane (385 mg, 0.47 mmol) and potassium acetate (1.38 g, 14.1 mmol) were successively added to a solution of 5-bromooxindole (1.0 g, 4.71 mmol) in methylene chloride (25 mL), followed by DMSO (15 mL). The crude mixture was diluted with water, extracted with methylene chloride (3x). the combined organic fractions were washed with water, brine, dried over magnesium sulfate, filtered, and the volatiles were removed under reduced pressure. The crude product was triturated with diethyl ether, sonicated, and the precipitate was collected by filtration to afford the title compound (165 mg, 14%). MS (ESI) m/z 260.3 [M+l]+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Bromoindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SIGNAL PHARMACEUTICALS, LLC; WO2008/51493; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

496-12-8, A common compound: 496-12-8, name is Isoindoline, belongs to indolines-derivatives compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

A solution of 5-bromo-2,4-dihydroxy-benzoic acid (520 mg, 2.33 mmol) in DMF (5 mL) was treated with 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (471 mg, 2.45 mmol) then HOBt (362 mg, 2.68 mmol). After 25 min, 2,3-dihydro-1 H-isoindole (0.5 mL, 2.63 mmol) was added then the mixture was stirred at r.t. for 18 h. The solvent was removed in vacuo then the residue was taken up in ethyl acetate and washed with 1N hydrochloric acid, saturated sodium bicarbonate solution and brine then dried (MgSO4) and concentrated. The residue was triturated with methanol to afford the title compound as a grey solid (328 mg, 44%). 1H NMR (DMSO-d6) 10.45 (1 H, s), 10.32 (1 H, s), 7.36 (1 H, br.s), 7.35 (1 H, s), 7.28 (3H, br.s), 6.59 (1 H, s), 4.77 (2H, br.s), 4.71 (2H, br.s). MS: [M+H]+ 332/334.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Isoindoline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ASTEX THERAPEUTICS LIMITED; WO2008/44054; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

2058-72-2, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 2058-72-2, name is 5-Bromo-1-methylindoline-2,3-dione, A new synthetic method of this compound is introduced below.

General procedure: The general synthetic approach involved condensation of an equimolar mixture of corresponding substituted indole-2,3-dione (0.01 mol) and substituted pyrazole (0.01 mol) in absolute ethanol in the presence of 2,3-drops of glacial acetic acid for 3-4 h. On cooling, flakes separated out which were filtered and recrystallized from hot ethanol to give shining bright needles of Schiff base.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Chinchole; Wankhede; Asian Journal of Chemistry; vol. 30; 10; (2018); p. 2220 – 2224;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

317-20-4, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 317-20-4, name is 7-Fluoroisatin, A new synthetic method of this compound is introduced below.

General procedure: The mixture of isatin (1 mmol), 3-amino-1-phenyl-1H-pyrazol-5(4H)-one (1 mmol), 1,2-diarylethan-1-one, 2,3-dihydroinden-1-one (1 mmol) or 3,4-dihydronaphthalen-1(2H)-one (1 mmol), H2O (6 mL), HOAc (2 mL) was put in a reaction flask under 90 C about 5-7 h (monitored by TLC). After completion, the reaction mixture was cooled to room temperature and the products would be isolated out at same time. Then, compound 4 was recrystallized from DMF, however, the pure products of 6 and 8 were filtered from water, dried, without further recrystallization.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Wang, Zhansheng; Gao, Lingli; Xu, Zhongyun; Ling, Zhi; Qin, Yaqi; Rong, Liangce; Tu, Shu-Jiang; Tetrahedron; vol. 73; 4; (2017); p. 385 – 394;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

99365-40-9, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 99365-40-9 name is 6-Bromoindolin-2-one, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Preparation 1: 6-Iodooxindole A schlenk tube and stir bar were dried in an oven overnight and then were evacuated, filled with Ar(g) and cooled. The schlenk tube was charged with CuI (45 mg, 0.236 mmol, 5 mol %), 6-bromoxindole (1.0 g, 4.72 mmol), and NaI (1.42 g, 9.44 mmol). The schlenk tube was evacuated and backfilled with Ar(g) (3 times). Racemic trans-N,N’-dimethyl-1,2-cyclohexanediamine (74 muL, 0.472 mmol, 10 mol %) and anhydrous dioxane (4.72 mL) were added via syringe under Ar(g). The schlenk tube was sealed with a teflon valve and the suspension was stirred at 110 C. for 24 h. The reaction was then cooled to room temperature and 15% NH4OH(aq) (50 mL) was added to the reaction mixture while stirring. The suspension was allowed to stir for about 30 min after which the tan solid was vacuum filtered and dried affording 6-Iodooxindole in 84% yield (1.027 g, 3.96 mmol).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 6-Bromoindolin-2-one, and friends who are interested can also refer to it.

Reference:
Patent; Allergan, Inc.; US2007/15748; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

324-03-8, A common compound: 324-03-8, name is 6-Fluoroindoline-2,3-dione, belongs to indolines-derivatives compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

Mg(ClO4)2 (0.1 g) was added to a mixture of isatin (2 mmol), and dimedone (4 mmol) in aqueousethanol solution (50%, v/v, 5 mL), and the resulting mixture was stirred at 80C for 10-12 h. Upon completion of the reaction (TLC, Ethyl acetate/Petroleum ether = 1:4), the mixture was allowedto cool to room temperature. The resulting solid was filtered and washed successively with water(2 30 mL) and cold aqueous ethanol (2 1 mL) to afford a crude product, which was recrystallizedfrom EtOH to afford the pure product 3. Some insolubility could be observed in the refluxing ethanolduring the recrystallization process, which should be filtered when hot.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Fluoroindoline-2,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Chen, Chunfeng; Lv, Chunlei; Liang, Jianfeng; Jin, Jianqing; Wang, Lijun; Wu, Chunlei; Shen, Runpu; Molecules; vol. 22; 8; (2017);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

317-20-4, Adding a certain compound to certain chemical reactions, such as: 317-20-4, name is 7-Fluoroisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 317-20-4.

Step 1: Preparation of 7-fluoro-1-methyl-1H-indole-2,3-dione 7-Fluoro-1H-indole-2,3-dione (prepared according to the method of Gassman as described in U.S. Pat. No. 4,188,325, 1.0 g, 6.05 mmol), iodomethane (1.13 ml, 18.2 mmol) and potassium carbonate (1.65 g, 12.1 mmol) in DMF (15 ml) are stirred at room temperature for 24 hours. The reaction mixture is diluted with ethyl acetate, washed with water and brine, dried (Na2SO4), and evaporated to give the title compound as an orange solid. HPLC r.t. 3.79 min; MS for C9H1FNO2 m/z 180.0(M+H)+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 7-Fluoroisatin, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Luehr, Gary W.; Jain, Rama; Renslo, Adam; Josyula, Vara Prasad Venkata Nagendra; Gordeev, Mikhail F.; US2006/30609; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

6326-79-0, Name is 6-Bromoisatin, 6326-79-0, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

To R12 (25.0 g, 111 mmol) in acetonitrile (750 mL) is added Mel (15 niL, 241 mmol) and K2C03 (60.0 g, 434 mmol) and the reaction mixture is stirred at 60 C for 2 h. The reaction mixture is filtered and concentrated. Water and ethyl acetate are added to the residue. The organic layer is extracted twice with water, dried over MgS04 and concentrated. Yield 56%, m/z 240/242 [M+H]+, rt 0.48 min, LC-MS Method X001 004.

Statistics shows that 6-Bromoisatin is playing an increasingly important role. we look forward to future research findings about 6326-79-0.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ANDERSKEWITZ, Ralf; GRUNDL, Marc; MORSCHHAEUSER, Gerd; OOST, Thorsten; PAUTSCH, Alexander; WO2014/140078; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

15362-40-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 15362-40-0 as follows.

To the four-necked flask was added 668 ml of water and then compound IV (233 g, 0.84 mol), potassium hydroxide (94.3 g,1.68 mol) and the temperature was raised to 100 C for 5 hours. Cool to 60 ~ 65 C, vacuum filter, add a small amount of water, filter cake at 85 CAfter dissolving in water,Join eta SO4 (27 0 g, 1.6 8mo 1) aqueous solution at 8 5 C for 1 hour, cooled and filtered to give a white solid494.0 g (Compound I: diclofenac zinc) in a yield of 90%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 15362-40-0, and friends who are interested can also refer to it.

Reference:
Patent; Jilin University; Liaoyuan Yinying Pharmaceutical Co., Ltd.; Li Guiying; Wang Zhaokun; Li Shumei; Peng Xiaojuan; Jin Xingtong; (8 pag.)CN106905178; (2017); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

317-20-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 317-20-4, name is 7-Fluoroisatin, This compound has unique chemical properties. The synthetic route is as follows.

0.4 mmol of 7-fluoroisatin, 0.2 mmol of antipyrine, 0.04 mmol of imidazole and 1 mL of water were mixed, and the reaction was stirred under an oil bath of 80 C for 29 hours.Then, the obtained reaction system was cooled to room temperature, extracted with dichloromethane, and the organic phase was collected. The obtained organic phase was dried over anhydrous sodium sulfate, concentrated, and separated by column chromatography (mobile phase: petroleum ether / ethyl acetate volume ratio) In the order of 4/1, 3/1, 2/1 and 1/1), the title compound I-10 (light yellow solid, yield 84%, purity 99.8%) was obtained.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Gannan Normal University; Zhang Yong; Nie Longjun; Liu Jinxiang; Fan Xiaolin; (23 pag.)CN110256407; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem