Month: September 2021

Healthcare careers for chemists are once again largely based in laboratories, although increasingly there is opportunity to work at the point of care, helping with patient investigation., category: indolines-derivatives

Bis(4-methoxybenzyl)amine (900 mg) was dissolved in dichloromethane (20 ml) and cooled to 0C. To this solution, triethylamine (1.02 ml) was added and compound 49 (1.05 g) was added in small portions, followed by stirring at room temperature for 3 hours. After addition of water, the reaction mixture was extracted with dichloromethane. The organic layer was washed with brine and dried over magnesium sulfate. After filtration and evaporation of the solvent under reduced pressure, the resulting residue was purified by silica gel column chromatography (developing solvent: ethyl acetate:n-hexane 1:1 to ethyl acetate) to give the desired compound (compound 50) (1.4 g, yield 81%). 1H-NMR (300MHz, CDCl3) delta: 3.24(2H, t, J=6.8Hz), 3.81(6H, s), 4.10-4.14(2H, m), 4.29(4H, s), 6.88(4H, d, J=8.7Hz), 7.23(4H, d, J=8.7Hz), 7.73(2H, dd, J=3.1, 5.3Hz), 7.87(2H, dd, J=3.1, 5.3Hz). Rf value (silica gel plate, developing solvent: ethyl acetate:n-hexane = 1:1): 0.24.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4403-36-5.

Reference:
Patent; CHUGAI SEIYAKU KABUSHIKI KAISHA; EP1634874; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

SDS of cas: 6941-75-9, The prevalence of solvent effects in heterogeneous catalysis has motivated developing quantitative kinetic, spectroscopic, and theoretical assessments of solvent structures and their interactions with reaction intermediates and transition states.

General procedure: The mixture of 4-bromophthalimide (225 mg, 1 mmol), 4-RPhSH(3 mmol), K2CO3 (136 mg, 1 mmol) and CuI (10 mg) was added to DMF (10 mL). The solution was heated at 130 C for 6 h under the protection of nitrogen. After cooled, water (30 mL) was added and the precipitation was filtered, washed with water. The product was purified by column chromatography on silica gel using dichloromethane/acetone (60:1).

Hope you enjoy the show about 6941-75-9.

Reference:
Article; Li, Xiangqian; Liang, Xiaomeng; Song, Ting; Su, Pengchen; Zhang, Zhichao; Bioorganic and Medicinal Chemistry; vol. 22; 21; (2014); p. 5738 – 5746;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 65826-95-1, name is 5-Methylindoline belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Safety of 5-Methylindoline

General procedure: Diphenyliodonium triflate (2a, 0.1 g, 0.23 mmol, 1.1 equiv) was charged in a vial and sealed with a septum. After adding TFE (3mL), indoline (1a, 0.024 mL, 0.21 mmol) was added dropwise slowly to the solution, which was then heated to 70 C for 14 h.After the solution was cooled to r.t., the mixture was diluted with H2O and sat. NaHCO3. The aqueous phase was extracted several times with CH2Cl2. The organic phase is washed with H2O, dried over MgSO4, filtered, and concentrated in vacuo. The crude residue was purified by column chromatography on silica gel, eluting with cyclohexane-CH2Cl2 (2:1, v/v) giving 34 mg(83%) of 3a as a colorless solid.

The synthetic route of 65826-95-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Riedmueller, Stefan; Nachtsheim, Boris J.; Synlett; vol. 26; 5; (2015); p. 651 – 655;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 3783-77-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3783-77-5, name is 2-(3-Oxobutyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 50 g of 2- (3-oxobutyl) isoindoline-1,3-dione, 14.3 g of ethylene glycol and 7.4 g of p-toluenesulfonium tetrahydrate were dissolved in 500 ml of anhydrous toluene and treated with a water separator Reflux for 24 hours. After completion of the reaction, the reaction system was saturatedNaHCO3 aqueous solution 500 ml twice. The aqueous phase was extracted twice with 500 ml of ethyl acetate. The organic phase is combined with anhydrous sulfur Dried over sodium carbonate, and the solvent was distilled off under reduced pressure to obtain a distillation residue which was recrystallized from ethanol to give 45 g of a yellow solid: 2- (2-(2-methyl-1,3-dioxolan-2-yl) ethyl) isoindoline-1,3-dione, yield: 74.8%.

The synthetic route of 2-(3-Oxobutyl)isoindoline-1,3-dione has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Wuhan Yao Ming Kant, Immanuel New Drug Development Co., Ltd.; Yu Lingbo; Wang Ruile; Zhou Qiang; Xu Xueqin; Zhang Dawei; Bai Youyin; Chen Dongzhi; Gao Mingfei; Yao Baoyuan; Han Huaxin; Fu Xinyu; Ma Rujian; (5 pag.)CN106939001; (2017); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 611-09-6, A common heterocyclic compound, 611-09-6, name is 5-Nitroindoline-2,3-dione, molecular formula is C8H4N2O4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of the isatin 1 or acenaphthenequinone 4 (1 mmol), indole 2 (2 mmol), p-TSA (10mol %), CH2Cl2 (10 mL) was added to 50 mL flask and stirred at room temperature until the thecompletion of the reaction (Scheme 1, 2). Then the solid was filtered and washed with CH2Cl2 (5mL) and ethanol (5 mL) in turns, affording the product in excellent yields, which wasrecrystallized from ethanol to produce pure crystalline products. The products were identified byelemental analysis, MS, 1H NMR, 13C NMR, and IR spectra.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Yu, Jiangxia; Shen, Tianhua; Lin, Yan; Zhou, Yongbing; Song, Qingbao; Synthetic Communications; vol. 44; 14; (2014); p. 2029 – 2036;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6941-75-9, name is 5-Bromoisoindoline-1,3-dione, A new synthetic method of this compound is introduced below., Formula: C8H4BrNO2

Example 8 Heck reaction of 4-Bromophthalic imide with 1 ,7-Octadien (Heck condition) 1 g 4-Bromophthalic imide (6.167 mmol), a two-fold excess 1 ,7-Octadien (12.33 mmol) and the catalysator system were solved in 50 ml DMF. The catalysator system consisted of Palladiumacetate (5 mol-% to Imide: 0.31 mmol), 0.92 mmol Triphenylphosphane and 6.17 mmol Triethylamin. The solution has been heated for 24 h at 150 C (Control of reaction progress via thin layer chromatography with CH2CI2: n-Hexane [5:1]). From the resulting dark brown solution the solvent was removed by reduced pressure. The obtained viscous brown raw product was solved with 80 ml CH2CI2 and washed three times (3 x 200 ml) with a saturated H20/NaCI solution. After that the CH2CI2-phase was dried with MgS04 and the solvent was removed by reduced pressure. The viscous brown product (1 ) was dried under constant vacuum. Yield : quant. IR : v 1772, 1717 (s, Imide) cm 1 MS / ESI : 401.14972 m/z (M+H+)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; DENTSPLY DETREY GMBH; KLEE, Joachim, E.; RETZMANN, Nils; RITTER, Helmut; SZILLAT, Florian; WO2014/114446; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 496-12-8,Some common heterocyclic compound, 496-12-8, name is Isoindoline, molecular formula is C8H9N, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of secondary amine (1.0 mmol), calcium carbide (0.20 g, 2.5 mmol), aldehyde (3 mmol), cuprous chloride (0.01 g, 0.1 mmol) and water (0.05 mL, 3 mmol) in DMSO (3 mL) was stirred at 100 C under N2for 4 h. The reaction was monitored by TLC. After reaction completion, the resulting mixture was filtered to remove the solid, and the liquor was extracted with ethyl acetate (3 × 10 mL) and washed with saturated brine (3 × 10 mL). The resulting organic phase was dried over anhydrous sodium sulfate and concentrated under reduced pressure. The residue was purified by column chromatography using petroleum ether and ethyl acetate (v/v 10:1) as the eluent.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Isoindoline, its application will become more common.

Reference:
Article; Fu, Rugang; Li, Zheng; Journal of Chemical Research; vol. 41; 6; (2017); p. 341 – 345;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 24566-79-8, name is N-(6-Bromohexyl)phthalimide, A new synthetic method of this compound is introduced below., Safety of N-(6-Bromohexyl)phthalimide

Triphenylmethanethiol (11.90 g, 43.08 mmol) was suspended in DMSO (40 mL). DBU (7.41 mL, 49.55 mmol) and 6-bromohexylphthalimide (13.32 g, 42.94 mmol) were added, and the mixture was allowed to react for approximately 15 min. The reaction mixture was partitioned between ethyl acetate (700 mL) and 0.1 M HCl (200 mL). The aqueous phase was extracted with ethyl acetate (3*50 mL), and the combined organic fractions were washed with NaHCO3 sat. (80 mL) and brine (80 mL), dried over MgSO4, filtered and concentrated. The crude yellow oil was recrystallized from n-heptane/ethyl acetate. The intermediate 6-(S-Trityl-)mercaptohexylphthalimide was obtained as a white solid (13.3 g, 26.4 mmol, 62%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SANOFI-AVENTIS DEUTSCHLAND GMBH; RAU, Harald; CLEEMANN, Felix; HERSEL, Ulrich; KADEN-VAGT, Silvia; LESSMANN, Torben; WEGGE, Thomas; US2015/258207; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 611-09-6, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 611-09-6, name is 5-Nitroindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: A mixture of isatin (1 mmol), dicarbonyl compound 1 (1 mmol),dicarbonyl compound 2 (1 mmol) and SSLP (0.1 g, 4.8 mol%) wasadded to a 25 mL canonical flask contained water (5 mL) and was stirred at 80 C for appropriate time. After completion of the reac-tion as indicated by TLC, the reaction mixture was filtered and washed with acetone (25 mL, two times) to separate the catalyst.The obtained organic phase was evaporated and the residue was recrystallized from ethanol to obtain the pure products.

The chemical industry reduces the impact on the environment during synthesis 5-Nitroindoline-2,3-dione. I believe this compound will play a more active role in future production and life.

Reference:
Article; Khalafi-Nezhad, Ali; Shahidzadeh, Elham Shaikhi; Sarikhani, Samira; Panahi, Farhad; Journal of Molecular Catalysis A: Chemical; vol. 379; (2013); p. 1 – 8;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 6941-75-9, name is 5-Bromoisoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6941-75-9, name: 5-Bromoisoindoline-1,3-dione

A mixture of Zn powder (1.73 g, 26.154 mmol), copper (II) sulfate pentahydrate (0.02 g, 0.08 mmol) and 2M aq NaOH (27 mL) were cooled to 0 C. 5-Bro moisoindoline-1,3-dione (5 g, 22 mmol) was added at the same temperature over the period of 30 min The reaction mixture was stirred at 0 C. for 30 min and 3 h at ambient temperature. The reaction mixture was filtered and the filtrate was neutralized with concentrated HCl. The reaction mixture was diluted with ethanol and extracted with ethyl acetate. The combined ethyl acetate layer was dried over Na2SO4 and concentrated under reduced pressure to afford the crude title compound as a brown solid, which was used in the next step without further purification (1.3 g): mp 258-261 C.; 1H NMR (400 MHz, DMSO-d6) delta 9.03 (br, 1H), 7.81 (m, 2H), 7.69 (m, 1H), 6.44 (m, 1H), 5.88 (d, J=9.3 Hz, 1H); ESIMS m/z 225.83 ([M-H]-); IR (thin film) 1684, 3246, 606 cm-1.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Bromoisoindoline-1,3-dione, and friends who are interested can also refer to it.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171308; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem