Month: September 2021

Quality Control of 5-Nitroindolin-2-one, The chemical industry reduces the impact on the environment during synthesis 20870-79-5, name is 5-Nitroindolin-2-one, I believe this compound will play a more active role in future production and life.

The commercial 5-nitroindolin-2-one (1.00 g, 5.61 mmol) was hydrogenated in EtOH (70 mL) in the presence of 10% Pd-C (315 mg, 2.97 mmol) for 4 h. Then the catalyst was filtered off through Celite, the Celite rinsed with additional EtOH and the solution was evaporated, to give 17 as a brown solid (698 mg, 4.71 mmol, 84% yield). 1H NMR (CD3OD): delta 3.43 (s, 2H, CH2); 6.63-6.65 (m, 2H, Ar); 6.73-6.74 (m, 1H, Ar) ppm. Anal. (C8H8N2O) Calc%: C 64.85, H 5.44, N 18.91; Found%: C 65.03, H 5.49, N 18.83.

As always, wish you can browse a selection of our May HOT articles below about 5-Nitroindolin-2-one.

Reference:
Article; Sestito, Simona; Nesi, Giulia; Daniele, Simona; Martelli, Alma; Digiacomo, Maria; Borghini, Alice; Pietra, Daniele; Calderone, Vincenzo; Lapucci, Annalina; Falasca, Marco; Parrella, Paola; Notarangelo, Angelantonio; Breschi, Maria C.; Macchia, Marco; Martini, Claudia; Rapposelli, Simona; European Journal of Medicinal Chemistry; vol. 105; (2015); p. 274 – 288;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Redox catalysis has been broadly utilized in electrochemical synthesis. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis., Reference of 611-09-6

General procedure: Isatin 1 (3 mmol), malononitrile (0.2 g, 3 mmol,), bicyclic CH-acid 2 (3 mmol) and sodium acetate (0.025 g, 0.3 mmol) in ‘solvent-free’ manner or with additive (‘on-solvent’ manner) were grinded with a pestle and mortar at ambient temperature for 15 minutes. After the reaction was finished, the mixture was air-dried. Then the crude solid was put on filter, rinsed with water (2 mL) and EtOH (2 mL), and then dried with a water pump to isolate the spiro-oxindole 3.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms. In my other articles, you can also check out more blogs about 611-09-6.

Reference:
Article; Elinson, Michail N.; Vereshchagin, Anatoly N.; Ryzhkov, Fedor V.; Anisina, Yuliya E.; Arkivoc; vol. 2018; 4; (2018);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Safety of N-Phthaloylglycine, The chemical industry reduces the impact on the environment during synthesis 4702-13-0, name is N-Phthaloylglycine, I believe this compound will play a more active role in future production and life.

(a) Preparation of 1,3-dihydro-1,3-dioxo-2H-isoindole-2-acetyl chloride STR10 A solution of 1,3-dihydro-1,3-dioxo-2H-isoindole-2-acetic acid (7.00 g) and thionyl chloride (12 mL) was stirred at reflux under nitrogen for one hour. The thionyl chloride was distilled from the reaction, and the resulting crude product was further purified by distillation via a kugelrohr apparatus (BUCHI, Flawil, Switzerland). [Bp: 160-180 C. (oven temperature) at 10 mm Hg.]The yield of the title compound was 6.88 grams (90.2%). The structure of the title compound, and of all of the compounds synthesised in each of the subsequent examples, was confirmed by 1 H NMR.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; G. D. Searle & Co.; US5212169; (1993); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Academic researchers, R&D teams, teachers, students, policy makers and the media all rely on us to share knowledge that is reliable, accurate and cutting-edge. 2058-72-2

General procedure: DABCO (0.112 g, 1.00 mmol) was added to a solution of 2a (0.08 g, 0.5 mmol), phenol (0.094 g, 1.00 mmol) and 1a (0.147 g, 1.00 mmol) in acetonitrile (0.5 mL), and the reaction was kept for 2 days. The reaction mixture was then directly subjected to column chromatography (EtOAc/Hexane, 3:10) to obtain the product 3aa as a yellow solid (0.142 g) at 92% yield.

The chemical industry reduces the impact on the environment during synthesis 2058-72-2. I believe this compound will play a more active role in future production and life.

Reference:
Article; Singh, Radhey M.; Bharadwaj, Kishor Chandra; Tiwari, Dharmendra Kumar; Beilstein Journal of Organic Chemistry; vol. 10; (2014); p. 2975 – 2980;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In chemical reaction engineering, simulations are useful for investigating and optimizing a particular reaction process or system., Application In Synthesis of 5,7-Dimethylindoline-2,3-dione

45. A. SYNTHESIS OF 5, 7-DIFNETHYL-IH-INDOLE To solution of 5, 7-dimethyl-lH-indole-2, 3-dione in tetrahydrofuran at 0 C was added 1. 0 M solution of borane-tetrahydrofuran complex in tetrahydrofuran (40 mL). After stirred at room temperature overnight, a 5% HCl solution was added to the mixture and it was stirred 20 minutes. It was neutralized with saturated sodium bicarbonate solution and extracted with ethyl acetate. Extracts were dried over magnesium sulfate and evaporated to dryness to afford the title compound as oil.

Hope you enjoy the show about 39603-24-2.

Reference:
Patent; SALMEDIX, INC.; WO2005/33112; (2005); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

We’ll be discussing some of the latest developments in chemical about CAS: 71294-07-0. Synthetic Route of 71294-07-0

Step 1 5,6-difluoro-3-methyl-1,3-dihydro-indol-2-one 1.5 g (9.0 mmol) 5,6-difluoro-1,3-dihydro-indol-2-one were stirred with 1.0 g Raney nickel in 50 mL methanol 3 h at 200 C. in an autoclave. The catalyst was filtered off and the filtrate was concentrated to dryness by rotary evaporation. Yield: 1.6 g (99% of theory) ESI-MS: m/z=184 (M+H)+

In the meantime we’ve collected together some recent articles in this area about 71294-07-0 to whet your appetite. Happy reading!

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; US2011/195954; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

COA of Formula: C10H9NO3,You could be based in a pharmaceutical company, working on developing and trialing new drugs; or in a public-sector research center, helping to ensure national healthcare provision keeps pace with new discoveries.

Sodium hydroxide solution (1N, 20 ml) was added to a solution of methyl 2-oxoindoline-6-carboxylate (2 g, 10.46 mmol, 1.00 equiv) in methanol (20 ml). The resulting solution was stirred for 2 hours at 80 C. The reaction mixture was cooled to 30 C., diluted with 50 ml of H2O and extracted with 2*30 mL of dichloromethane. The aqueous layers were combined and the pH adjusted to 2 with aqueous hydrochloric acid (6 N). The solids were collected by filtration and dried to give the title product 1.28 g (69%) as a brown solid. 1H NMR (400 MHz, CDCl3) delta: 12.86 (s, 1H), 10.50 (s, 1H), 7.55 (m, 1H), 7.32-7.30 (m, 2H), 3.56 (s, 2H).

The synthetic route of 14192-26-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Auspex Pharmaceuticals, Inc.; Rao, Tadimeti; Zhang, Chengzhi; US2015/284327; (2015); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

With the volume and accessibility of scientific research increasing across the world, it has never been more important to continue building the reputation for quality and ethical publishing we’ve spent the past two centuries establishing., Application In Synthesis of 2-Allylisoindoline-1,3-dione

General procedure: A magnetically stirred solution of N-allylphthalimide 4 (1 equiv) and a xanthate 3 (2-4 equiv) in 1,2-dichloroethane (2-4 mL/mmol of N-allylphthalimide) was heated at reflux for 15 min. DLP (3-5 mol percent) was added and additional DLP (5 mol percent) was added per hour until complete consumption of 4. The mixture was allowed to cool to room temperature and the solvent was evaporated under reduced pressure. The residue was purified by flash chromatography on silica gel to yield the desired product 5.#10;

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Allylisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Kakaei, Saeed; Chen, Ning; Xu, Jiaxi; Tetrahedron; vol. 69; 1; (2013); p. 302 – 309;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 17564-64-6, Researchers are common within chemical engineering and are often tasked with creating and developing new chemical techniques, frequently combining other advanced and emerging scientific areas.

General procedure: The initial carbonyl compound (50 mmol) was dissolved/suspended in ethanol (50 mL) and magnetically stirred with thiosemicarbazide (50 mmol) and catalytic amounts of acetic acid for 8-24 h at room temperature. The obtained thiosemicarbazone was filtered, washed with appropriate solvent (n-hexane, petroleumether or diethyl ether) and dried under vacuum. The intermediate thiosemicarbazone (50 mmol) reacted with ethyl bromoacetate (50 mmol), in methanol (50 mL) and sodium acetate (50 mmol) at room temperature under magnetic stirring for 24 h. The resulting 4-thiazolidinone was poured on ice, filtered or extracted with chloroform (3 x 100 mL) and purified by column chromatography (SiO2, ethyl acetate/n-hexane). Then, the obtained thiazolidinone (50 mmol) was dissolved/suspended in 50 mL of anhydrous acetone in the presence of anhydrous potassium carbonate (50 mmol), and reacted with equimolar amounts of 4-nitrobenzyl bromide, 1-(chloromethyl)naphthalene and N-(chloromethyl)phthalimide for 24-48 h. The product was poured on ice, filtered or extracted with chloroform (3 x 50 mL) and purified by column chromatography (SiO2, ethyl acetate/n-hexane) in order to obtain the title compoundsin high yields. 7.1.55 2-((2-(2-(Pentan-2-ylidene)hydrazono)-4-oxothiazolidin-3-yl)methyl)isoindoline-1,3-dione (3C) White powder, mp 125-126 C, 84% yield; 1H NMR (400 MHz, CDCl3): delta 0.92-0.95 (t, 3H, CH3), 1.59-1.61 (m, 2H, CH2), 1.93 (s, 3H, CH3), 2.23-2.27 (t, 2H, CH2), 3.83 (s, 2H, CH2, thiazolidinone), 5.73 (s, 2H, ArCH2), 7.75-7.76 (m, 2H, Ar), 7.86-7.87 (m, 2H, Ar). 13C NMR (100 MHz, CDCl3): delta 13.8, 14.0, 17.5, 19.6, 19.8, 22.9, 32.2, 34.1, 40.6, 45.0, 45.1, 123.6, 131.7, 134.3, 158.0, 166.7, 170.0, 171.1.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(Chloromethyl)isoindoline-1,3-dione, its application will become more common.

Reference:
Article; De Monte, Celeste; Carradori, Simone; Bizzarri, Bruna; Bolasco, Adriana; Caprara, Federica; Mollica, Adriano; Rivanera, Daniela; Mari, Emanuela; Zicari, Alessandra; Akdemir, Atilla; Secci, Daniela; European Journal of Medicinal Chemistry; vol. 107; (2016); p. 82 – 96;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

HPLC of Formula: C8H6ClNO, The chemical industry reduces the impact on the environment during synthesis 17630-75-0, name is 5-Chloro-2-oxindole, I believe this compound will play a more active role in future production and life.

7-Bromo-5-Chloro-2-Oxindole 5-Chloro-2-oxindole (16.8 g) and 19.6 g of N-bromosuccinimide were suspended in 140 mL of acetonitrile and refluxed for 3 hours. Thin layer chromatography (silica, ethyl acetate) at 2 hours of reflux showed 5-chloro-2-oxindole or N-bromosuccinimide (Rf 0.8), product (Rf 0.85) and a second product (Rf 0.9) whose proportions did not change after another hour of reflux. The mixture was cooled to 10 C., the precipitate was collected by vacuum filtration, washed with 25 mL of ethanol and sucked dry for 20 minutes in the funnel to give 14.1 g of wet product (56% yield). The solid was suspended in 200 mL of denatured ethanol and slurry-washed by stirring and refluxing for 10 minutes. The mixture was cooled in an ice bath to 10 C. The solid product was collected by vacuum filtration, washed with 25 mL of ethanol and dried under vacuum at 40 C. to give 12.7 g (51% yield) of 7-bromo-5-chloro-2-oxindole.

In the meantime we’ve collected together some recent articles in this area about 17630-75-0 to whet your appetite. Happy reading!

Reference:
Patent; Sugen. Inc.; US2003/100555; (2003); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem