Month: September 2021

Adding a certain compound to certain chemical reactions, such as: 893620-44-5, name is 6-Bromo-5-fluoroindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 893620-44-5, Recommanded Product: 6-Bromo-5-fluoroindolin-2-one

d) 6-Bromo-5-fluoro-1 ,3-trimethylindolin-2-one To a suspension of NaH (5.04 g, 126 mmol) in tetrahydrofuran (105 ml) under an argon atmosphere was added 6-bromo-5-fluoroindolin-2-one (7.24 g, 31.5 mmol) in portions. After gas evolution has ceased methyl iodide (17.9 g, 7.88 ml, 126 mmol) was added dropwise within 50 minutes by means of a syringe pump (exothermic reaction), keeping the temperature of the reaction mixture between 24C and 26C. The reaction mixture was kept at room temperature for 4 hours and then carefully quenched with aqueous ammonium chloride solution. The reaction mixture was diluted with tert-butyl methyl ether, water and saturated aqueous ammonium chloride solution. The aqueous phase was extracted with tert-butyl methyl ether, the combined organic phases were washed with saturated aqueous ammonium chloride and dried over sodium sulfate. The solvent was evaporated and the residue was triturated with heptane to give the title compound as light brown solid (7.87 g). 1H NMR (CDC13, 400 MHz): (ppm) = 7.02-6.97 (m, 2H), 3.19 (s, 3H), 1.36 (s, 6H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 6-Bromo-5-fluoroindolin-2-one, and friends who are interested can also refer to it.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BRUNNER, Daniela; MALBERG, Jessica; SHANKAR, Bavani G.; KOLCZEWSKI, Sabine; LIMBERG, Anja; PRINSSEN, Eric; RIEMER, Claus; STOLL, Theodor; WO2014/40969; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

COA of Formula: C10H6ClNO3, Chemical engineers ensure the efficiency and safety of chemical processes, adapt the chemical make-up of products to meet environmental or economic needs, and apply new technologies to improve existing processes.

To a solution of SY1-182 (0.300 g, 1.34 mmol) in CH2Cl2 (5 mL) was added ammonia solution (7 N in MeOH, 0.57 mL, 4.02mmol) at 0 C. The mixture was allowed to warm to room temperature and stirred for 2 h. The mixture was diluted with hexanes and filtered. The solid product collected on frit was washed with water (20 mL) followed by hexanes (30 mL) and dried under vacuum to give the product as a white solid (0.200g, 74%).1H NMR (500 MHz, DMSO-d6) delta 7.91-7.90 (m, 2H), 7.87-7.85 (m, 2H) 7.69 (s, 1H), 7.25 (s, 1H), 4.15 (s, 2H).13C NMR (125 MHz, DMSO-d6) delta 167.92, 167.56, 134.53, 131.75, 123.17, 39.95. HPLC-MS (ESI+): m/z 431.1 [100%, (2M+Na)+], 227.2 [60%, (M+Na)+], 205.2 [80%, (M + H)+].

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6780-38-7.

Reference:
Patent; H. LEE MOFFITT CANCER CENTER & RESEARCH INSTITUTE, INC.; BURNETTE, Pearlie; LAWRENCE, Harshani; LAWRENCE, Nicholas J.; (285 pag.)WO2017/161119; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 6941-75-9, Having gained chemical understanding at molecular level, chemistry graduates may choose to apply this knowledge in almost unlimited ways, as it can be used to analyze all matter and therefore our entire environment.

A mixture of 4-bromophthalic anhydride (25 g) in formamide (75 ml) was heated at 2000C for 16 hours then allowed to cool to room temperature. The reaction mixture was diluted with water (200 ml), filtered, the filter cake was washed with water then diethyl ether and sucked dry to give 20.85 g of light mustard solid.280 ml of 1 M Borane-THF complex was added dropwise to a stirred solution of 4-bromophthalimide (20.85 g; 92.2 mmol) in anhydrous THF (200 ml) at O0C then heated at reflux overnight. The reaction was cooled to O0C then treated cautiously with methanol (100 ml) followed by 2M HCI (100 ml) then heated at reflux for 3 hours. The reaction mixture was cooled and the organics evaporated. The aqueous was diluted with water (100 ml) the extracted with DCM (x3). The aqueous was basified with 2M NaOH then extracted with DCM (x3). The combined DCM extracts were dried (MgSO4), filtered and evaporated to give 6.99 g of 5-bromo-2,3-dihydro-1H-isoindole as a dark brown gummy solid. 1H NMR (DMSO-d6) 7.45 (1H, s), 7.36 (1 H1 d), 7.20 (1H, d), 4.05 (4H, s).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms. In my other articles, you can also check out more blogs about 6941-75-9.

Reference:
Patent; ASTEX THERAPEUTICS LIMITED; WO2008/44054; (2008); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In chemical reaction engineering, simulations are useful for investigating and optimizing a particular reaction process or system., Application of 21857-45-4

To a 100 mL round- bottomed flask, flushed with nitrogen, were added 17 (91 mg, 0.5 mmol), 5-methoxyindoline (82 mg, 0.55 mmol), BuOH (10 mL), and 2-3 drops of cone. HC1. The reaction mixture was heated at reflux with stirring for 12 h until the starting material 17 disappeared (TLC). The reaction solution was allowed to cool to room temperature; the solvent was removed under reduced pressure, and the residue was purified by column chromatography on silica gel with hexane: acetyl acetate = 20: 1 as the eluent. Fractions containing the product (TLC) were combined and evaporated to afford 93 mg (63%) 8 as a white powder: mp 201.1-202.3 C; Rf 0.5 (AcOEt/Hexane 3 : 1); 1H NMR (DMSO-d6) delta 2.42 (s, 3 H), 2.53 (s, 3 H), 3.25 (t, 2 H), 3.75 (s, 3 H), 4.39 (t, 2 H), 6.79 (t, 2 H), 6.89 (d, 1 H), 8.48 (d, 1 H), Anal. Ci7H17N302

Interested yet? This just the tip of the iceberg, You can reading other blog about 21857-45-4.

Reference:
Patent; DUQUESNE UNIVERSITY OF THE HOLY SPIRIT; GANGJEE, Aleem; (111 pag.)WO2016/100495; (2016); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Healthcare careers for chemists are once again largely based in laboratories, although increasingly there is opportunity to work at the point of care, helping with patient investigation., COA of Formula: C10H7NO2

3-Amino-5-bromobenzotrifluoride (2.00 g, 8.332 mmol) was dissolved in acetonitrile (80 mL) and the solution was degassed with nitrogen. Pd(OAc)2 (94 mg, 0.417 mmol), tris(2- methylphenyl)phosphine (254 mg, 0.833 mmol) and triethylamine (3.5 mL, 25.0 mmol) were added and the bright orange solution was allowed to stir at room temperature for 1 h. To this solution was added N-vinylphthalimide (1.73 g, 10.0 mmol) and the reaction mixture was degassed and was heated at reflux for 16 h. The reaction was filtered through a Celite pad. The filtrate was washed with water and brine, was dried over magnesium sulfate, was filtered and was concentrated. The residue was purified by column chromatography (eluted with hexanes:ethyl acetate = 3 : 1 to 2: 1 to 1 : 1) to afford 2- {(E)-2-[3-amino-5- (trifluoromethyl)phenyl]vinyl}-lH-isoindole-l,3(2H)-dione (2.02 g, 73% yield) as a yellow solid. XH NMR (400 MHz, CDC13): delta 7.92-7.90 (m, 2H), 7.78-7.76 (m, 2H), 7.59 (d, 1H), 7.35 (d, 1H), 7.09 (s, 1H), 6.91 (s, 1H), 6.79 (s, 1H), 3.88 (-NH2; br s, 2H).

This is the end of this tutorial post, and I hope it has helped your research about 3485-84-5.

Reference:
Patent; EXELIXIS, INC.; ANAND, Neel, Kumar; BROWN, S., David; TESFAI, Zerom; ZAHARIA, Cristiana, A.; WO2012/37132; (2012); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

COA of Formula: C10H7NO3, Having gained chemical understanding at molecular level, chemistry graduates may choose to apply this knowledge in almost unlimited ways, as it can be used to analyze all matter and therefore our entire environment.

To a stirred solution of 9 (0.38mmol) in MeOH (2mL), NH4OAc (3.76mmol), 2-(1,3-dioxoisoindolin-2-yl)acetaldehyde (10) (0.56mmol), and MTBE (2mL) were added at room temperature. The mixture was heated at 50°C for 10h and then cooled to room temperature. The pH of the reaction mixture was adjusted to 8 with saturated aqueous NaHCO3 solution. The reaction mixture was extracted with EtOAc (2×35mL), and the combined organic layer was washed with water (10mL) and brine (10mL). The EtOAc solution was dried over anhydrous Na2SO4, filtered, and evaporated to dryness under reduced pressure. The residue was purified by MPLC on silica gel using MeOH/ CH2Cl2 (1:20) as eluent to give the titled compound as a yellow solid. Yield 67percent; mp 262?263°C; IR (KBr) 3076, 2928, 1716, 1391cm?1; 1H NMR (400MHz, CDCl3/CD3OD) delta 2.51 (s, 3H), 5.00 (s, 2H), 7.00 (d, 1H, J=7.6Hz), 7.10 (d, 1H, J=8.0Hz), 7.42 (t, 1H, J=7.8Hz), 7.67 (d, 1H, J=9.2Hz), 7.69?7.72 (m, 2H), 7.74 (dd, 1H, J=9.2, 1.6Hz), 7.83?7.86 (m, 2H), 8.28 (s, 1H), 8.87 (br s, 1H); 13C NMR (100MHz, CDCl3) delta 24.6, 35.5, 116.3, 117.7, 122.2, 122.8, 123.9 (2C), 128.0, 128.9, 131.7, 132.1 (2C), 134.2, 134.6 (2C), 137.3, 143.3, 147.7, 150.0, 154.5, 159.1, 168.1 (2C); HRMS-ESI: m/z [M+H]+ calcd for C24H18N7O2: 436.1516, found 436.1530.

We are continuing to develop the new Research Structures and WebCSD systems in response to feedback from you, our user community, so we would love to hear what you think about the enhanced search functionality and any suggestions you might have about 2913-97-5.

Reference:
Article; Jin, Cheng Hua; Krishnaiah, Maddeboina; Sreenu, Domalapally; Subrahmanyam, Vura Bala; Park, Hyun-Ju; Park, So-Jung; Sheen, Yhun Yhong; Kim, Dae-Kee; Bioorganic and Medicinal Chemistry; vol. 22; 9; (2014); p. 2724 – 2732;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 3484-35-3, Chemistry built the modern world, from the materials that make up the everyday objects around us, the batteries in our devices and cleaning products that help to maintain sanitation.

General procedure: To a one-neck round-bottom flask equipped with magnetic stirringwas added 6-chloro-2-indolinone (2a, 1.00 g, 6.0 mmol),vinamidinium salt 324 (2.02 g, 12.0 mmol), Et3N (1.82 g, 18.0mmol), and DMF (10 mL). The mixture was stirred for 20 h atr.t., after the reaction was complete (monitored by TLC,EtOAc/MeOH = 20:1), 30 mL EtOAc and 30 mL water was added,then the aqueous layer was extracted with 30 mL EtOAc. Thecombined EtOAc layer was washed with sat. NaCl solution (15mL) and water (15 mL) then dried over Na2SO4. After filteringthe desiccant, the solvent was concentrated under vacuum to avolume of about 5 mL. The mixture was titrated with 15 mL nhexaneto give a yellow precipitant, the solid was filtered, anddried under vacuum to give 4a (1.34 g, yield 88%), a yellowpowder, which was used in the next step without further purification;mp > 250 C.

I am very proud of our efforts over the past few months and hope to 3484-35-3 help many people in the next few years.

Reference:
Article; Tian, Shaixiao; Mao, Yu; Jiang, Yongjun; Xu, Guangyu; Synlett; vol. 29; 7; (2018); p. 949 – 953;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

With the volume and accessibility of scientific research increasing across the world, it has never been more important to continue building the reputation for quality and ethical publishing we’ve spent the past two centuries establishing., name: Isoindoline

To a solution of 3,4-(methylenedioxy)aniline (150 mg, 1.09 mmol) in dry DCM (4 mL) was added dropwise phenyl chloroformate (0.138 ml, 1.09 mmol) and triethylamine (0.153 ml, 1.09 mmol). After the reaction mixture was stirred at r.t for 8 hr., isoindoline (0.123 ml, 1.09 mmol) and triethylamine (0.153 ml, 1.09 mmo) were added, and the reaction mixture was stirred overnight. The solvent was then removed under reduced pressure, and the residue was purified by chromatographed on silica gel (EtOAC/Hexane: 1:3) to give the title compound (185 mg, 60%) as a white solid: m.p:165-166 C. 1H NMR (CDCl3, 500 MHz): 4.82 (s, 4H); 5.93 (s, 2H); 6.20 (s, 1H); 6.73 (s, 2H); 7.17 (s, 1H); 7.30 (m, 4H). MS (MH+, 283).

Hope you enjoy the show about 496-12-8.

Reference:
Patent; Tachdjian, Catherine; Patron, Andrew P.; Adamski-Werner, Sara L.; Bakir, Farid; Chen, Qing; Darmohusodo, Vincent; Hobson, Stephen Terrence; Li, Xiaodong; Qi, Ming; Rogers, Daniel Harry; Rinnova, Marketa; Servant, Guy; Tang, Xiao-Qing; Zoller, Mark; Wallace, David; Xing, Amy; Gubernator, Klaus; US2005/84506; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 222036-66-0, name is 5-Aminoisoindolin-1-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 5-Aminoisoindolin-1-one

Synthesis of 5-((9H-purin-6-yl)amino)isoindolin-1-one (Cpd. No. 1F) A mixture of 6-chloro-9H-purine (1, 0.15 g, 0.97 mmol), 5-aminoisoindoline-1-one (2, 0.14 g, 0.97 mmol) and (1S)-(+)-camphor-10-sulfonic acid (0.27 g, 1.16 mmol) in isopropanol (10 mL) was heated in a sealed tube at 100° C. for 4 h. After completion of the reaction, the mixture was concentrated. The obtained solid was filtered and re-crystallized from ethanol and isopropanol to afford 5-((9H-purin-6-yl)amino)isoindolin-1-one (Cpd. No. 1F) as off-white solid. Yield: 0.15 g, 58percent; MS (ESI) m/z 267 [M+1]+; 1H NMR (400 MHz, DMSO-d6) delta 11.01 (s, 1H), 8.66 (s, 2H), 8.44 (s, 1H), 8.31 (d, J=1.9 Hz, 1H), 7.99 (dd, J=8.3, 1.8 Hz, 1H), 7.67 (d, J=8.3 Hz, 1H), 4.40 (s, 2H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 222036-66-0, its application will become more common.

Reference:
Patent; eFFECTOR Therapeutics, Inc.; Sprengeler, Paul A.; Reich, Siegfried H.; Ernst, Justin T.; Webber, Stephen E.; Shaghafi, Mike; Murphy, Douglas; Tran, Chinh; (131 pag.)US10112955; (2018); B2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1127-59-9, name is 7-Methylindoline-2,3-dione, A new synthetic method of this compound is introduced below., 1127-59-9

General procedure: A mixture of 1H-pyrazol-5-amin (1 mmol), isatin (1 mmol) and enolizable C ? H activated compound (1 mmol) in NDDES (1.5 ml)was stirred under microwave irradiation at 60°C for an appropriate time. The progress of the reaction was monitored by TLC. After completion of the reaction, the mixture was cooled to room temperature and cold water was added to the reaction mixture. The precipitated solid was isolated by filtration, washed with water and purified by recrystallization from ethanol.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 1127-59-9.

Reference:
Article; Zhang, Wei-Hong; Chen, Meng-Nan; Hao, Yi; Jiang, Xin; Zhou, Xiao-Lin; Zhang, Zhan-Hui; Journal of Molecular Liquids; vol. 278; (2019); p. 124 – 129;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem