Month: September 2021

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1074-82-4, name is Potassium 1,3-dioxoisoindolin-2-ide, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of Potassium 1,3-dioxoisoindolin-2-ide

a) Preparation of 5-bromopentylphthalimide Potassium phthalimide (5.4 mmoles) was added to a solution of 1,5-dibromopentane (3.72 g; 16.2 mmoles) in dimethylformamide (8 ml) and heated to 80C approx. under stirring. After 2 hours, water was added and the solution was repeatedly extracted with ether. The collected organic phases were washed with water, dried on Na2SO4 and evaporated under reduced pressure to give a solid (4.50 g), which was purified by chromatography on silica gel (Etp/Et2O 8:2) yielding 2.38 g of a white solid. Yield 68%.

Keep reading other articles of Potassium 1,3-dioxoisoindolin-2-ide! Don’t worry, you don’t need a PhD in chemistry to understand the explanations! I believe this compound will play a more active role in future production and life.

Reference:
Patent; MEDIOLANUM FARMACEUTICI S.P.A.; EP575954; (1993); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application In Synthesis of 6-Nitroisoindolin-1-one, The prevalence of solvent effects in heterogeneous catalysis has motivated developing quantitative kinetic, spectroscopic, and theoretical assessments of solvent structures and their interactions with reaction intermediates and transition states.

5-Amino-2,3-dihydroisoindol-l-oneH2N; [693] Iron powder (158mg, 2.83mmol), water (61uL), and HC1 (37percent, 5uL,0.566mmol) were added into the suspension of 5-nitro-2,3-dihydroisoindol-l-one (50.4mg,0.283mmol) in EtOH (754|^L). The above mixture was heated at 95°C for 2h. After thattime, several drops of 7N NH3 in MeOH were added to basify the solution, and the solid wasfiltered off. The filtrate was concentrated in vacua to obtain a light-yellow solid that waspurified by preparative TLC eluting with 10percent MeOH/CH2Cl2 to give a light-yellow solid of5-amino-2,3-dihydroisoindol-l-one. ‘HNMR (CD3OD, 400 MHz): 5 = 7.48 (s, 1 H), 8.08 (s,2 H), 9.91 (s, 1 H), 10.66 (d, 1 H, J= 8.8 Hz). MS (ES+): m/z 149.21 (100) [MH1″]. HPLC: *R= 1.20 min (ZQ2000, polar_5 min).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; OSI PHARMACEUTICALS, INC.; WO2006/17443; (2006); A2;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 446292-08-6, name is (S)-2-((2-Oxo-3-(4-(3-oxomorpholino)phenyl)oxazolidin-5-yl)methyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Formula: C22H19N3O6

210.7 g (0.5 mol) of (S)-2-{[2-oxo-3-(4-(3-oxomorpholine)phenyl]oxazolidine-5-yl] prepared in Example 7 was added to the reaction flask. Methyl isonon-1,3-dione (formula VII), 1500 ml of anhydrous ethanol, and 500 ml of a 30% aqueous solution of methylamine were stirred well.The reaction was heated to 40C to 60C for 8 hours, and TLC control (dichloromethane:methanol = 20:1, volume ratio) was completed.Adjust pH to 1-2 with 10% hydrochloric acid.A large amount of white solids precipitated and cooled to about 15C.Stir for 2 hours, filter and filter cake washed with 300 ml absolute ethanol.Drying under reduced pressure gave 147.0 g of a white solid (formula VIII) in a molar yield of 89.7%. The HPLC purity was 98.7%.

Keep reading other articles of (S)-2-((2-Oxo-3-(4-(3-oxomorpholino)phenyl)oxazolidin-5-yl)methyl)isoindoline-1,3-dione! Don’t worry, you don’t need a PhD in chemistry to understand the explanations! I believe this compound will play a more active role in future production and life.

Reference:
Patent; Peking University Fangzheng Group Co., Ltd.; Peking University Pharmaceutical Co., Ltd.; Peking University Medical Treatment Industrial Group Co., Ltd.; Xu Hong; Tian Juan; Zhang Zheng; Wang Wei; Ren Juan; (16 pag.)CN105085508; (2017); B;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Career opportunities within science and technology are seeing unprecedented growth across the world, and those who study chemistry or another natural science at university now have increasingly better career prospects. Safety of 5-Methoxyindolin-2-one

General procedure: 3-(Propan-2-yliden)indolin-2-one (7a): A solution of indolin-2-one (500 mg, 3.76 mmol, 1.0 equiv.) in acetone (15 mL, 0.25 M) was heated in the presence of catalytic amounts of morpholine (164 mL, 164 mg, 1.88 mmol, 0.5 equiv.) for 16 h at reflux temperature. After complete consumption of the indolin-2-one (determined by thin layer chromatography (TLC)) all volatiles were removed under vacuum. Column chromatography(column diameter 5 cm, 30 g silica, v/v (P/EA)6 : 4-1 : 1) afforded the title compound (650 mg, 3.75 mmol, 99 %) as a yellow solid. Apparent multiplets which occur as a result of accidental equality of coupling constants to those of magnetically non-equivalent protons are marked as virtual (virt.). RF 0.70 (P/EA3 : 7; UV). deltaH (CDCl3, 250 MHz,300 K) 7.96 (1H, br s, NH), 7.52 (1H, br d, 3J 7.7, H-4), 7.19(1H, virt. td, 3JE3J 7.7, 4J 1.2, H-6), 7.01 (1H, virt. td, 3JE3J7.7, 4J 1.2, H-5), 6.85 (1H, ddd, 3J 7.7, 4J 1.2, 5J 0.6, H-7), 2.62(3H, s, H-30), 2.39 (3H, s, H-1′). deltaC (CDCl3, 63 MHz, 300 K)169.5 (s, C-2), 155.7 (s, C-2′), 139.3 (s, C-7a), 127.7 (d, C-6),124.6 (s, C-3), 123.9 (d, C-5), 123.0 (s, C-3a), 121.8 (d, C-4),109.3 (d, C-7), 25.4 (q, C-1′), 23.3 (q, C-3′). The NMR data match the values reported in the literature.[9] 5-Methoxy-3-(propan-2-ylidene)indolin-2-one (7g): Prepared from 5-methoxy-2-oxindole according to RP 1 on a938 mmol scale. The title compound (176 mg, 866 mmol, 92 %) was obtained as a yellow solid. RF 0.45 (P/EA1 : 1; UV). numax(ATR)/cm1 3150w, 3030w, 2938w, 2836w, 1694vs (CO),1619s, 1594w, 1479s, 1305m, 1203w. deltaH (CDCl3, 250 MHz,300 K) 8.07 (1H, s, NH), 7.14 (1H, d, 4J 1.6, H-4), 6.78-6.72(2H, m, H-6/H-7), 3.81 (3H, s, OCH3), 2.62 (3H, s, H-3′), 2.36(3H, s, H-1′). deltaC (CDCl3, 63 MHz, 300 K) 169.8 (s, C-2), 156.0(s, C-3′), 155.2 (s, C-5), 133.4 (s, C-7a), 125.6 (s, C-3a), 123.4 (s,C-3), 111.9 (d, C-4), 111.8 (d, C-6), 109.3 (d, C-7), 56.1 (q,OCH3), 25.3 (q, C-1′), 23.3 (q, C-30). m/z (HRMS ESI)204.1019; [M H)](C12H13NO2) requires 204.1019.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 7699-18-5.

Reference:
Article; Maturi, Mark M.; Poethig, Alexander; Bach, Thorsten; Australian Journal of Chemistry; vol. 68; 11; (2015); p. 1682 – 1692;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Academic researchers, R&D teams, teachers, students, policy makers and the media all rely on us to share knowledge that is reliable, accurate and cutting-edge. Electric Literature of 611-09-6

General procedure: A mixture of malononitrile (1 mmol), isatin (1 mmol), dicarbonyl (1 mmol), PEGOSO3H(0.1 mmol), and water (2 mL) was stirred under reflux for the appropriate time (shown in Tables 3, 4). After completion of the reaction, the reaction mixture was filtered and the residue was washed with ethanol. The crude solid product was recrystallized from EtOH to afforded the pure products in high purity and yield.Assignment of the structures of the products was based on their 1H NMR, 13C NMR,and IR spectra.

Hope you enjoy the show about 611-09-6.

Reference:
Article; Nasseri; Zakerinasab; Research on Chemical Intermediates; vol. 41; 8; (2015); p. 5261 – 5270;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Redox catalysis has been broadly utilized in electrochemical synthesis. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis., Recommanded Product: 129487-92-9

To a solution of 300mg (1.28mmol) of the compound obtained in the Manufacturing Example 2 in 10mL of anhydrous dichloromethane were added 191muL (2.69mmol) of acetyl chloride and 375muL (2.69mmol) of triethylamine, and the mixture was stirred for 1 hour at room temperature. Then, water was added to the reaction mixture and the mixture was extracted with dichloromethane. The organic layer was dried over with anhydrous sodium sulfate and removed under reduced pressure. The resulting residue was purified by silica gel column chromatography (eluent: hexane/ethyl acetate = 1/1 to 1/2) to give 370mg (quantitative) of the title compound.

As always, wish you can browse a selection of our May HOT articles below about tert-Butyl 5-aminoindoline-1-carboxylate.

Reference:
Patent; Daiichi Asubio Pharma Co., Ltd.; EP1775298; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3484-35-3, name is 5-Methylindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Electric Literature of 3484-35-3

General procedure: To a solution of 3-substituted-5-benzylidene-2-thioxo-4-thiazolidinone (3a-3h, 8a-8f) (0.003 mol) in 1,4-dioxane (15 ml) was added HC(OEt)3 (2 ml) and BF3·Et2O (2 ml). The reaction mixture was heated to 80 C and stirring was continued at the same temperature for 4 h. The resulting 2-ethylthio-3-substituted-5-benzylidene-4-thiazolium fluoroborate (4a-4h, 9a-9f) was precipitated, filtered off, and dried without any additional purification, as starting material for the following reactions. To a mixture of thiazolium fluoroborate (4a-4h, 9a-9f) (0.003 mol) and indolin-2-one (11a-11f) (0.003 mol) in acetonitrile (15 ml) was added triethylamine (0.91 g, 0.009 mol) dropwise at 25 C, and the mixture was stirred for 4 h at the same temperature. The orange precipitate was collected and washed with ethyl acetate (8 ml). The crude product thus obtained was recrystallized from methanol or acetone to give compound (5a-5s, 10a-10s).

You can get involved in discussing the latest developments in this exciting area about 5-Methylindolin-2-one.

Reference:
Article; Wang, Shuobing; Zhao, Yanfang; Zhang, Guogang; Lv, Yingxiang; Zhang, Ning; Gong, Ping; European Journal of Medicinal Chemistry; vol. 46; 8; (2011); p. 3509 – 3518;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In chemical reaction engineering, simulations are useful for investigating and optimizing a particular reaction process or system., Synthetic Route of 480-91-1

General procedure: Isoindolin-1-one (200 mg, 1.50mmol) was dissolved in super-dry DMSO (4 mL), and Cs2CO3 (1215 mg, 3.75 mmol), CuI (58 mg, 0.30mmol) and N1,N2-dimethylethane-1,2-diamine (27 mg, 33 muL, 0.30 mmol) were added to the solution.The resulting mixture was stirred at room temperature for 10 min, after which iodobenzene (2.25mmol) was added. Then the mixture was heated to 120 C. When TLC showed that isoindolin-1-onehad been fully converted, the reaction was stopped. The mixture was extracted with ethyl acetate (20mL) and H2O (10 mL). The water phase was re-extracted with ethyl acetate (20 mL). The organic layerwas combined and washed with brine (10 mL). Then the solution was dried over anhydrous MgSO4,filtered and concentrated, and the crude residue was purified by flash chromatography over silica gelusing CH2Cl2/CH3OH as the gradient elution to afford the title compounds.

Statistics shows that Isoindolin-1-one is playing an increasingly important role. we look forward to future research findings about 480-91-1.

Reference:
Article; Wang, Yixuan; Wang, Huiqiang; Jiang, Xinbei; Jiang, Zhi; Guo, Tingting; Ji, Xingyue; Li, Yanping; Li, Yuhuan; Li, Zhuorong; Molecules; vol. 24; 5; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

While the job of a research scientist varies, most chemistry careers in research are based in laboratories, where research is conducted by teams following scientific methods and standards. , Formula: C8H4FNO2

Add 11.33g NaNO3 and 100mL H2SO4 to a 500mL reaction flask.With stirring, the temperature of the ice bath was lowered to 0 C. Take 20.00g of compound 1-1,Dissolved in 120mL H2SO4,Slowly add the 1-1 H2SO4 solution to the reaction flask,After dripping, the reaction was held at 0 C for 1 hour, and then the reaction solution was poured into 1 L of ice water.After stirring for 0.5 hours, it was filtered and the filter cake was washed with water until neutral.The filter cake was washed with 80 mL of EtOH / H2O (7: 3) for 0.5 hours, filtered,The filter cake was dried to obtain 18.83 g of a crude product of 2-1.Yield: 74%.

As always, wish you can browse a selection of our May HOT articles below about 6-Fluoroindoline-2,3-dione.

Reference:
Patent; Chinese Academy Of Sciences Shanghai Organic Chemistry Institute; Ma Dawei; Wang Kailiang; Xia Shanghua; Li Zheng; Zhao Jinlong; Li Ying; (82 pag.)CN110642874; (2020); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

With the volume and accessibility of scientific research increasing across the world, it has never been more important to continue building the reputation for quality and ethical publishing we’ve spent the past two centuries establishing., Reference of 20870-77-3

REFERENCE EXAMPLE 30 5.5 g of 4-chlorooxindole was dissolved in 80 ml of dioxane and 6.2 g of sodium borohydride was suspended in the resulting solution. 12.7 ml of trifluoroacetic acid (d=1.48) was added thereto dropwise at room temperature while stirring. After heat-refluxing the mixture for 4.5 hours, the solvent was removed therefrom under reduced pressure. Water was added to the residue and the water-insoluble materials were removed by filtration and washed with diethyl ether. The filtrate was extracted with diethyl ether and the ether layer was dried over anhydrous sodium sulfate followed by removing the solvent. The residue was distilled under reduced pressure to obtain 3.9 g of 4-chloroindoline as a colorless oily product having a boiling point of 135 C. at 10 mm Hg.

Because a catalyst decreases the height of the energy barrier, its presence increases the reaction rates of both the forward and the reverse reactions by the same amount.Read on for other articles about 20870-77-3.

Reference:
Patent; Otsuka Pharmaceutical Co., Ltd.; US4317820; (1982); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem