Month: September 2021

Recommanded Product: 552330-86-6, The chemical industry reduces the impact on the environment during synthesis 552330-86-6, name is 5-Bromoisoindolin-1-one, I believe this compound will play a more active role in future production and life.

Step 1: 5-(Ethylthio)isoindolin-1-one (0428) (0429) 5-Bromoisoindolin-1-one (10 g, 47.16 mmol) and sodium ethanethiolate (9.92 g, 117.90 mmol) were mixed together in DMF (100 mL) and the reaction heated to 100 C. for 20 min. The reaction was cooled to room temperature, poured into water (100 mL) and the product extracted with EtOAc (3×200 mL). The combined organic extracts were washed with brine (4×50 mL). LCMS indicated product in the aqueous washings consequently they were combined and extracted with EtOAc (4×50 mL). The organic extracts were combined, dried using a phase separator cartridge and concentrated in vacuo. The solid obtained was dried under high vacuum overnight. 5-(Ethylthio)isoindolin-1-one (8.68 g, 95%) was obtained as a yellow solid. The material was used in the next step without further purification. (0430) LC/MS: m/z=194 [M+H]+. 1H NMR (500 MHz, DMSO-d6) delta 1.27 (t, 3H), 3.06 (q, 2H), 4.33 (s, 2H), 7.36 (dd, 1H), 7.47-7.48 (m, 1H), 7.57 (d, 1H), 8.45 (s, 1H).

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 552330-86-6 is helpful to your research.

Reference:
Patent; AstraZeneca AB; NARJES, Frank; OLSSON, Roine Ingemar; VON BERG, Stefan; LEVER, Sarah; (112 pag.)US2017/166527; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In chemical reaction engineering, simulations are useful for investigating and optimizing a particular reaction process or system., Reference of 20870-79-5

General procedure: Trifluoroacetic acid (0.75 mL, 0.009 mol) was added to a cooled (0 C) solution (4.5 mL CH2Cl2) of3-amino-2,2?-bipyridine (0.513 g, 0.003 mol), followed by isoamyl nitrite (0.61 mL, 0.004 mol). After 1 h,the diazonium salt of 3-amino-2,2?-bipyridine was precipitated out by cooling the reaction mixtureto -78 C, followed by the addition of diethyl ether (30 mL). The precipitate was filtered. A sample(2 mmol; 0.27 g) of indol-2-one was dissolved in dilute potassium hydroxide solution (15 mL) andcooled in a saltice bath and then cold diazonium solution was added to this cooled solution portionwise by stirring. The solution was further stirred at 0-5 C for 1 h. The pH of the reaction mixturewas maintained at 4-6 by the addition of solid sodium acetate in portions. The mixture was stirredfor 24 h at room temperature. The resulting solid was filtered, washed with cold water, and air-dried.Crystallization from ethanol gave yellow crystalline.

Because a catalyst decreases the height of the energy barrier, its presence increases the reaction rates of both the forward and the reverse reactions by the same amount.Read on for other articles about 20870-79-5.

Reference:
Article; ?andrik, Robert; Tisovsky, Pavol; Csicsai, Klaudia; Donovalova, Jana; Gaplovsky, Martin; Sokolik, Robert; Filo, Juraj; Gaplovsky, Anton; Molecules; vol. 24; 14; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In chemical reaction engineering, simulations are useful for investigating and optimizing a particular reaction process or system., Synthetic Route of 2058-72-2

General procedure: GN/SO3H (80 mg) was added to the 3 mL of EtOH/water (1:1) and dispersed for 30 min. Then, malononitrile (1 mmol), isatin (1 mmol), and dimedone (1 mmol) were added to the mixture and the mixture was heated to reflux and kept at this temperature for an appropriate time. After the time of reaction was completed, water was separated by centrifuging followed by extracting the crude product by ethyl acetate. The solvent was dried using Na2SO4 and removed from the reaction by evaporation with a rotary evaporator. Finally, the crude product was recrystallized in hot ethanol to achieve the pure product. The GN/SO3H nanocomposite was washed and reused several times.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri; Research on Chemical Intermediates; vol. 44; 11; (2018); p. 6979 – 6993;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

We’ll be discussing some of the latest developments in chemical about CAS: 3484-35-3. Related Products of 3484-35-3

General procedure: To a solution of appropriate oxindole (7a-e, 0.3 mmol) in ethanol (3 mL) was added corresponding aldehydes (11a-e,0.32 mmol) and a catalytic amount of piperidine. The reaction mixture was stirred at reflux for 6-12 h (reaction monitored byTLC). After cooling, the precipitate was filtered, washed with cold ethanol, and dried in air to furnish pure (Z)-3-(3′-methoxy-4′-(2-amino-2-oxoethoxy)-benzylidene)indolin-2-ones title compounds of formula (4a-v) as yellow/brown/orange solids in moderate to excellent yields.

Because a catalyst decreases the height of the energy barrier, its presence increases the reaction rates of both the forward and the reverse reactions by the same amount.Read on for other articles about 3484-35-3.

Reference:
Article; Senwar, Kishna Ram; Reddy, T. Srinivasa; Thummuri, Dinesh; Sharma, Pankaj; Naidu; Srinivasulu, Gannoju; Shankaraiah, Nagula; European Journal of Medicinal Chemistry; vol. 118; (2016); p. 34 – 46;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

While the job of a research scientist varies, most chemistry careers in research are based in laboratories, where research is conducted by teams following scientific methods and standards. , Application of 6326-79-0

General procedure: Isatins (1a-j, 3.0 g), hydrazine hydrate (80%, 13 mL) and water (13 mL) were added to a flask equipped with a thermometer with vigorous stirring. The reaction mixture was kept at 140 C in an oil bath for 6 h before being cooled to r.t., when hydrochloric acid (2.0 mol L-1) was added to bring the pH to pH 2. The reaction mixture was stirred at r.t. for 12 h. Compounds 2a-j were obtained by filtering under vacuum and recrystallisation from absolute ethanol.

This is the end of this tutorial post, and I hope it has helped your research about 6326-79-0.

Reference:
Article; Zhang, Chao; Xu, Juan; Zhao, Xinyu; Kang, Congmin; Journal of Chemical Research; vol. 41; 9; (2017); p. 537 – 540;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 21544-81-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 21544-81-0 as follows.

Hydrogen peroxide (30 % solution in water, 30 ml) was added dropwise to a stirred solution of 4,6-dimethoxy-2,3-dioxoindoline (27 g) in a concentrated aqueous sodium hydroxide solution (33 %, 220 ml). The resultant mixture was stirred at ambient temperature for 10 minutes. Ice was added and the basicity of the mixture was reduced to pH9 by the addition of concentrated aqueous hydrochloric acid and the mixture was then acidified to pH3.5 by the addition of glacial acetic acid. The resultant precipitate was isolated, washed with water and dried overnight under vacuum to give 2-amino-4,6-dimethoxybenzoic acid (15.9 g); NMR Spectrum : (DMSOd6) 3.7 (s, 3H), 3.78 (s, 3H), 5.79 (s, 1H), 5.92 (s, 1H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4,6-Dimethoxyindoline-2,3-dione, its application will become more common.

Reference:
Patent; AstraZeneca AB; EP1292594; (2004); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 6941-75-9,You could be based in a pharmaceutical company, working on developing and trialing new drugs; or in a public-sector research center, helping to ensure national healthcare provision keeps pace with new discoveries.

A solution of LIALH4 (8.8 mL of 1 M solution in Et20, 8.8 mmol) in dry THF (13 mL) was cooled to 0 C. Concentrated H2S04 (0.42 g, 4.3 mmol) was added dropwise, and the resulting mixture was stirred at 0 C for 30 min. 5-Bromo-lH-isoindole-1, 3 (2H)- dione (0.409 g, 1. 81 mmol) was added in portions over 15 minutes, and the reaction was allowed to warm to room temperature when the addition was complete. The reaction was stirred at room temperature for 2. 5H, and then cooled back to 0 C and quenched by the addition OF MEOH (2 mL). Et2O was added (50 mL), followed by NA2S04-10H20. The mixture was stirred vigorously until the organic layer was clear. The mixture was then filtered and concentrated in VACUO. Purification by column chromatography (4: 1 CH2CL2; MeOH + 0. 1% conc. NH3) provided the title compound (0.128 g, 36%). 1H-NMR (CDCl3): No. 7.38 (s 1H), 7.33 (D,@ J=7. 6 Hz, 1H), 7.12 (d, J=8. 0 Hz, 1H), 4.21 (s, 2H), 4.17 (s, 2H), 2.09 (s, 1H). MS (ESI) (M+H) +=198/200.

In the meantime we’ve collected together some recent articles in this area about 6941-75-9 to whet your appetite. Happy reading!

Reference:
Patent; ASTRAZENECA AB; WO2004/60882; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

name: 4-Bromoisoindolin-1-one,You could be based in a pharmaceutical company, working on developing and trialing new drugs; or in a public-sector research center, helping to ensure national healthcare provision keeps pace with new discoveries.

EXAMPLE 54A 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1-isoindolinone A suspension of Example 1C (10.6 g, 50 mmol) and 4,4,5,5,4′,4′,5′,5′-octamethyl-[2,2′]bi[[1,3,2]dioxaborolanyl] (15.23 g, 60 mmol) in DMF (390 mL) was stirred until a clear yellow solution was obtained. The solution was then treated with potassium acetate (14.72 g, 150 mmol), degassed with nitrogen, treated with [1.1′-bis(diphenylphosphino)-ferrocene]dichloropalladium [II].CH2Cl2 (7 g, 8.5 mmol) and heated to 90 C. overnight. The reaction was cooled to room temperature and filtered through diatomaceous earth (Celite), and concentrated. The concentrate was partitioned between water and ethyl acetate and filtered through diatomaceous earth (Celite). The organic phase was dried (Na2SO4), filtered, and concentrated. The crude product was purified by silica gel chromatography eluding with 100% ethyl acetate and triturated from hexanes to give 4.56 g (35% yield) of the desired product. m.p.: 189-191 C.

This is the end of this tutorial post, and I hope it has helped your research about 337536-15-9.

Reference:
Patent; Curtin, Michael L.; Davidsen, Steven K.; Frey, Robin R.; Heyman, Howard R.; Holms, James H.; Michaelides, Michael; Steinman, Douglas H.; US2005/26976; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

We’ll be discussing some of the latest developments in chemical about CAS: 3783-77-5. category: indolines-derivatives

In a 10 ml reaction tube, adding phosphine nitrogen ligand L3a (0.31 mg, 0 . 65 mumol) with the three-phenyl phosphorus is great (0.48 mg, 0 . 50 mumol), system through the vacuum line, replace the nitrogen 3 times, and steams newly added new degassed toluene 2 ml, solution in 90 C under stirring 3 hours, cooling to room temperature, solvent is removed under reduced pressure. At the same time in another 10 ml hydrogenation bottle, adding beta – aminoketone laf (43.4 mg, 0.2 mmol) with anhydrous carbonate cesium (6.50 mg, 0 . 02 mmol), system through the vacuum line, replace the nitrogen 3 times. A syringe has been coordination of the new catalyst for steaming and new degassing of ethanol (3 ml) containing dissolved out and injected into the substrate and additive in the reaction tube, the reaction system is put in an autoclave, in 25 C and H2(50 Bar) is stirred under the condition 24 hours, the solvent is removed under reduced pressure, taking a small amount of the mixed system is nuclear magnetic resonance to determine the conversion rate. The rest of the survivor column chromatography separation, to obtain the pure product 2 af. The conversion is 100%, enantiomeric excess is 93%. 2 Af: white solid. According to the embodiment 1 – 12 and not the result of the symmetrical field of catalytic hydrogenation of the well known common sense, can without any doubt be inferred in this embodiment of the product structure is shown in formula (II) of the structure.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 3783-77-5.

Reference:
Patent; Shanghai Jiao Tong University; Shanghai Zizhu Rising Industrial Technology Institute; Zhang Wanbin; Liu Delong; Wang Yanzhao; Jiang Xiuchen; Cao Lingyu; (32 pag.)CN105085372; (2018); B;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Formula: C9H9NO, The chemical industry reduces the impact on the environment during synthesis 3484-35-3, name is 5-Methylindolin-2-one, I believe this compound will play a more active role in future production and life.

Under nitrogen protection, 0.5 mmol of raw 5-methyl-2-indolinone, 1.2 mmol of pinacol borane and catalyst Y [N(SiMe3) 2] 30.05 mmol, 3 mL of toluene, reacted at 120 C for 36 h, and the product isolation yield was 87%.

We are continuing to develop the new Research Structures and WebCSD systems in response to feedback from you, our user community, so we would love to hear what you think about the enhanced search functionality and any suggestions you might have about 3484-35-3.

Reference:
Patent; Wenzhou Medical University; Zhang Junfang; Cai Wenxuan; (11 pag.)CN110818608; (2020); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem