Month: August 2021

52351-75-4, name is 6-Methoxyindoline-2,3-dione, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. SDS of cas: 52351-75-4

General procedure: Suitable indoline-2,3-dione 1a-c (1.0 mmol) was dissolved in methanol (5 mL) with gentle heating, then arylhydrazine (2.4 mmol) was slowly added with stirring at room temperature. After stirring overnight, the resulting precipitate was filtered and crystallized or the reaction mixture was evaporated to dryness and the residue suitably purified.

The synthetic route of 52351-75-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Campagna, Francesco; Catto, Marco; Purgatorio, Rosa; Altomare, Cosimo D.; Carotti, Angelo; De Stradis, Angelo; Palazzo, Gerardo; European Journal of Medicinal Chemistry; vol. 46; 1; (2011); p. 275 – 284;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 3484-35-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3484-35-3, name is 5-Methylindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Equimolar quantity of 5-substituted-1H-indolin-2-ones and 2-(4-formylphenoxy)-N-substituted-phenyl-acetamide was taken into round bottom flask containing 50 mL of methanol, followed by 2-3 drops of piperidine. The reaction mixture was refluxed for 1-4 h or till the end of reaction as confirmed by TLC. Then, it was cooled to room temperature and, the solution was filtered. The obtained residue was recrystallized by using dimethylformamide and ethanol.

The synthetic route of 5-Methylindolin-2-one has been constantly updated, and we look forward to future research findings.

Reference:
Article; Bhadauria, Vivek Singh; Sravanthi, Vishnu; Kumar, Sujeet; Das, Debajyoti; De Clercq, Erik; Schols, Dominique; Tokuda, Harukuni; Karki, Subhas S.; Acta poloniae pharmaceutica; vol. 74; 1; (2017); p. 137 – 145;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 7699-18-5, name is 5-Methoxyindolin-2-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7699-18-5, name: 5-Methoxyindolin-2-one

General procedure: The appropriate indolin-2-one (10 mmol) was dissolved in methanol (100 mL) and treated with the equivalent of the appropriate imidazo[2,1-b]thiazole-5-carbaldehyde 2 and piperidine (1 mL toobtain compounds 6, 8, 10) or 37% hydrochloric acid (1 mL to obtain compounds 7, 9). The reaction mixture was refluxed for 8-13 h (according to a TLC test), and the precipitate formed on cooling was collected by filtration.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methoxyindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Conti, Ilaria; Morigi, Rita; Locatelli, Alessandra; Rambaldi, Mirella; Bua, Gloria; Gallinella, Giorgio; Leoni, Alberto; Molecules; vol. 24; 6; (2019);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 317-20-4, name is 7-Fluoroisatin, A new synthetic method of this compound is introduced below., Recommanded Product: 317-20-4

7-Fluoro-N-methylisatin (IVa). To a solution of IIIa (380 mg, 2.30 mmol) in dry acetone (60 mL) was added Na2CO3 (anh.) (3.5 g) and dimethylsulfate (0.4 mL) under Ar and the reaction mixture was heated at 60 C. for 20 h. Then, the mixture was filtered and the filtrate was carefully evaporated using a high vacuum pump (under 40 C.). The solid residue was submitted to flash chromatography with CH2Cl2 to afford IVa (288 mg, 1.61 mmol, 70%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE (CNRS); UNIVERSITE PIERRE ET MARIE CURIE; UNIVERSITE DE RENNES I; UNIVERSITY OF LLEIDA; UNIVERSITE D’ATHENES; US2010/331327; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

24566-79-8, name is N-(6-Bromohexyl)phthalimide, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. COA of Formula: C14H16BrNO2

General procedure: A mixture of the corresponding secondary amine 3a-d [23] (5.5mmol), anhydrous K2CO3 (6mmol) and compounds 2a-d (5mmol) were added in CH3CN (20ml). The mixture was heated at 65C for 8-10h. The solvent was evaporated under reduced pressure. Then water (25mL) was added, and the mixture was extracted with dichloromethane (20mL×3). The combined organic phases were washed with saturated aqueous sodium chloride (30mL), dried over sodium sulfate, and filtered. The solvent was evaporated under vacuum. The residue was purified on a silica gel chromatography using mixtures of petroleum/acetone as eluent to obtain the oil products 4-7.

The synthetic route of 24566-79-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sang, Zhipei; Qiang, Xiaoming; Li, Yan; Xu, Rui; Cao, Zhongcheng; Song, Qing; Wang, Ting; Zhang, Xiaoyu; Liu, Hongyan; Tan, Zhenghuai; Deng, Yong; European Journal of Medicinal Chemistry; vol. 135; (2017); p. 307 – 323;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 56341-37-8, The chemical industry reduces the impact on the environment during synthesis 56341-37-8, name is 6-Chlorooxindole, I believe this compound will play a more active role in future production and life.

A solution of 6-chloro-oxindole(184mg, 1.1mmol) in tetrahydrofuran(5ml) and triethylamine(0.3mL) were added to a solution of 3,5-bis(trifluoromethyl)phenylisocyanate(255mg, 1.0mmol) in tetrahydrofuran(5mL) under argon atmosphere, and the mixture was stirred at room temperature for 4 hours. The reaction mixture was poured into diluted hydrochloric acid and extracted with ethyl acetate. The ethyl acetate layer was washed successively with water and brine, and dried over anhydrous magnesium sulfate. The residue obtained by evaporation of the solvent under reduced pressure was purified by column chromatography on silica gel(n-hexane:ethyl acetate=4:1) to give the title compound(172.2mg, 40.7%) as a pink solid.1H-NMR(DMSO-d6):delta 3.97(2H, s), 7.29(1H, dd, J=8.1, 2.1Hz), 7.41(1H, d, J=8.1Hz), 7.88(1H, s), 8.04(1H, d, J=2.1Hz), 8.38(2H, s), 10.93(1H, s).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Chlorooxindole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Institute of Medicinal Molecular Design, Inc.; EP1555018; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 3676-85-5, A common heterocyclic compound, 3676-85-5, name is 5-Aminoisoindoline-1,3-dione, molecular formula is C8H6N2O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

1.00 mmol of 5-aminoisoindoline-1 ,3-dione, commercial product, was solubilized in 1.0 ml_ of toluene and added with 1.20 mmol of commercial 4- chlorobenzoylchloride and 1.20 mmol of triethylamine, then heated at reflux for 10 hours. After cooling, the solid that separates was collected by filtration, dried under vacuum and purified by crystallization in methanol. 285.5 mg of the desired product of the title were so obtained (yield 95%). It was characterized by chemical-physical and spectroscopical data. M.p. (C): >300. 1 H-NMR (delta, DMSO, d6): 8.318 (d, 1 H, Ar, J=1.64), 8.131 (dd, 1 H, Ar, J=8.24, J=1.84), 8.024 (d, 2H, Ar, J=8.60), 7.838 (d, 1 H, Ar, J=8.16), 7.659 (d, 2H, Ar, J=8.61), 10.844 (s, 1 H, NH, exc), 1 1.272 (s, 1 H, NH, exc).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; UNIVERSITA’ DI PISA; PAOLINI, Edoardo; QUATTRINI, Luca; COVIELLO, Vito; ANTONIOLI, Luca; FORNAI, Matteo; BLANDIZZI, Corrado; OH, Won Keun; LA MOTTA, Concettina; (30 pag.)WO2018/189679; (2018); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2058-72-2 as follows. Formula: C9H6BrNO2

Example 12: Under nitrogen protection, copper powder (1.75 mmol) was sequentially added to a 10 ml reaction tube containing a magnet.1-methyl-5-nitroindole-2,3-dione (1.55 mmol), bromodifluoromethyl-1,3-benzoxazole (1.50 mmol),p-Toluenesulfonic acid (0.31 mmol) was added to dry NMP 4.0 ml and reacted at 80 C for 6 hours.After the reaction was stopped, the solid in the reaction mixture was filtered through a short silica gel column, and the filtrate was extracted with saturated brine and ethyl acetate.The organic layer was taken and dried over anhydrous sodium sulfate.Filter and concentrate. The crude product was separated and purified by column chromatography to give the desired product 3d, yield 82%.

According to the analysis of related databases, 2058-72-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Shanghai University; Jiang Haizhen; Zhang Tiantian; Miao Feng; Wang Dejing; Zhang Qian; Wang Wei; (21 pag.)CN108467391; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 20870-79-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 20870-79-5, name is 5-Nitroindolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Example 159b 5-amino 1,3-dihydro-indol-2-one A mixture of 1.5 g (8.4 mmol) of 5-nitro-1,3-dihydro-indol-2-one, 150 mg of Pd/C 10%, and 50 ml MeOH in 100 ml of EtOAc was placed on Parr hydrogenator and charged with 45 psi of Hydrogen gas. The mixture was shaken for 2 hrs. The mixture was filtered and the solvent was removed in vacuo to yield 5-amino 1,3-dihydro-indol-2-one (1.22 g, 98%): 1H NMR (DMSO-d6): delta3.27 (s, 2H), 4.6 (s, 2H), 6.34 (dd, J1=2 Hz, J2=8.1 Hz, 1H), 6.45 (m, 2H), 9.88 (s, 1 H). APCI-MS: m/z 147 (m-H)-.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Nitroindolin-2-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Glaxo Wellcome Inc.; US6268391; (2001); B1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 39755-95-8, These common heterocyclic compound, 39755-95-8, name is 5-Methoxyisatin, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: GN/SO3H (80 mg) was added to the 3 mL of EtOH/water (1:1) and dispersed for 30 min. Then, malononitrile (1 mmol), isatin (1 mmol), and dimedone (1 mmol) were added to the mixture and the mixture was heated to reflux and kept at this temperature for an appropriate time. After the time of reaction was completed, water was separated by centrifuging followed by extracting the crude product by ethyl acetate. The solvent was dried using Na2SO4 and removed from the reaction by evaporation with a rotary evaporator. Finally, the crude product was recrystallized in hot ethanol to achieve the pure product. The GN/SO3H nanocomposite was washed and reused several times.

The synthetic route of 39755-95-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Allahresani, Ali; Taheri, Bahare; Nasseri; Research on Chemical Intermediates; vol. 44; 11; (2018); p. 6979 – 6993;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem