Month: August 2021

Electric Literature of 17702-83-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 17702-83-9, name is 2-(8-Bromooctyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Procedure M1. A mixture of the appropriate 2-(bromoalkyl)isoindoline-1,3-dione (1 equiv) with amine (pyrrolidine or morpholine) (1.1 equiv) in the presence of K2CO3 (3 equiv) was stirred in acetonitrile under reflux for 20 h. Subsequently, the solvent was evaporated under reduced pressure,producing a residue which was further dissolved in 20 mL of water and extracted with DCM(3 x 30 mL). The organic layer was dried with anhydrous Na2SO4. The solvent was then evaporated and the residue was purified by silica gel column chromatography (S3) yielding a yellow oil. The finalproduct was transformed into hydrochloride salt. The following compounds were obtained.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(8-Bromooctyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Hebda, Michalina; Bajda, Marek; Wieckowska, Anna; Szal?aj, Natalia; Pasieka, Anna; Panek, Dawid; Gody?, Justyna; Wichur, Tomasz; Knez, Damijan; Gobec, Stanislav; Malawska, Barbara; Molecules; vol. 21; 4; (2016);,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 5332-26-3, A common heterocyclic compound, 5332-26-3, name is 2-(Bromomethyl)isoindoline-1,3-dione, molecular formula is C9H6BrNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

3.5 g (87 mmol) of sodium hydride are added portionwise to a solution of 25 g (87 mmol) of dimethyl 2-(4-tert-butoxycarbonylpiperazin-1-yl)malonate in 250 ml of tetrahydrofuran cooled to 2 C. The reaction medium is stirred at ambient temperature for 30 minutes and then brought back to 2 C., before adding, dropwise, 21 g (87 mmol) of 2-bromomethylisoindole-1,3-dione in 200 ml of tetrahydrofuran. The reaction medium is stirred at ambient temperature for 20 h, treated by adding 500 ml of water and then extracted with ethyl acetate. The organic phase is dried over magnesium sulfate, filtered, and concentrated under vacuum. [0193] The crude product obtained is purified by chromatography on silica gel, elution being carried out with a 70/30 heptane/ethyl acetate mixture. 27.5 g (73%) of dimethyl 2-(4-tert-butoxycarbonylpiperazin-1-yl)-2-(1,3-dioxo-1,3-dihydroisoindol-2-ylmethyl)malonate are obtained in the form of a white solid.

The synthetic route of 5332-26-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GALDERMA RESEARCH & DEVELOPMENT; MOUNIER, Carine; Carlavan, Isabelle; Aubert, Jerome; Jomard, Andre; Rossio, Patricia; US2014/275108; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

These common heterocyclic compound, 61-70-1, name is 1-Methylindolin-2-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 1-Methylindolin-2-one

Step 2; Preparation of 1-methyl-5-nitro-1,3-dihydro-indol-2-one; 1-Methyl-1,3-dihydro-indol-2-one (Step 1, 2.10 g, 14.3 mmol) is added in portions to 70% nitric acid (10 ml) at -10 C. After the addition is complete, the reaction is allowed to warm to room temperature and then stirred for 5 hours. The mixture is diluted with ice water and the resulting precipitate filtered, washed with water, and dried under a vacuum to give the title compound as a brown solid. HPLC r.t. 3.97 min; MS for C9H8N2O3 m/Z 193.9(M+H)+.

The synthetic route of 1-Methylindolin-2-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Josyula, Vara Prasad Venkata Nagendra; Luehr, Gary; Gordeev, Mikhail; US2006/229348; (2006); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 118289-55-7, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 118289-55-7 as follows.

General procedure: A mixture of 6-chloro-5-(2-chloroethyl)-1,3-dihydro-2H-indol-2-one 1 (1.00mol), potassium carbonate (1.20mol), secondary amine (2a-h, 1.30mol) in water (10mL) was refluxed until completion (TLC, about 24-48h) and the reaction mass was cooled to RT and then extracted with DCM to get crude 3a-h. Recrystallized using aqueous acetone or aqueous ethanol or methanol (Yield 55-70%).

According to the analysis of related databases, 118289-55-7, the application of this compound in the production field has become more and more popular.

Reference:
Article; Meti, Gangadhar Y.; Kamble, Atulkumar A.; Kamble, Ravindra R.; Somagond, Shilpa M.; Devarajegowda; Kumari, Sandhya; Kalthur, Guruprasad; Adiga, Satish K.; European Journal of Medicinal Chemistry; vol. 121; (2016); p. 221 – 231;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 20870-78-4, name is 5-Bromoindolin-2-one, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 5-Bromoindolin-2-one

Compound 43a (5 g, 23.7 mmol) was dissolved in 150 mL THF.Sodium carbonate (25 g, 23.5 mmol) and di-tert-butyl dicarbonate (12.8 g, 58.6 mmol) were added in that order.Reaction at 60 C for 12 h,After completion of the reaction, the mixture was filtered and purified by silica gel column chromatography to afford compound 43b (3.1 g).

According to the analysis of related databases, 20870-78-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Sichuan Kelun Botai Bio-pharmaceutical Co., Ltd.; Zhu Jiawang; Cai Jiaqiang; Li Guiying; You Zejin; Wu Yongyong; Han Runfeng; Ge Yong; Wang Lichun; Wang Jingyi; (49 pag.)CN109928979; (2019); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 39603-24-2, name is 5,7-Dimethylindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Safety of 5,7-Dimethylindoline-2,3-dione

General procedure: In a 25 cm3 round bottom flask, to a mixture of isatin(1 mmol), malononitrile (2 mmol), and cyclohexanone (1 mmol) in 10 cm3 30 % ethanol, DABCO (20 mol%)was added. The reaction mixture was stirred at room temperature for time mentioned in Table 2 until completionof reaction, monitored by TLC. After completion ofreaction, the mixture was cooled and filtered to furnish thedesired product in good yields.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 39603-24-2.

Reference:
Article; Hegade, Pravin G.; Chinchkar, Sarika D.; Pore, Dattaprasad M.; Monatshefte fur Chemie; vol. 147; 7; (2016); p. 1243 – 1249;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 19727-83-4,Some common heterocyclic compound, 19727-83-4, name is 6-Nitroindoline, molecular formula is C8H8N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

6-Nitroindoline (1. 2 MMOL) was dissolved in DCM (8 ML), treated with pyridine (2. 4 MMOL) and cooled to 0C. MESO2CI (1. 3 mmol) was added dropwise and the mixture allowed to stir at room temperature overnight. 0. 5 M HCI solution (10 ML) was added and the mixture extracted twice with DCM (10 ml) and twice with EtOAc (10 ML). The combined organics were washed with brine, dried over NA2SO4 and evaporated. The dried residue was dissolved in MeOH (5 ml) and THF (4 ml). Pd/C (100 mg) was added and the mixture stirred under an atmosphere of hydrogen at room temperature for 5 h. The mixture was filtered through a pad of Celite, which was washed with plenty of MeOH and EtOAc. The filtrate was concentrated in vacuum and the residue dried. The crude 6-amino indoline derivative and 4, 6-dichloropyrimidine (1. 5 MMOL) were dissolved in isopropanol (6 ml) and conc. HCI (0. 4 ml) and the mixture heated to reflux for 2. 5 h. For precipitation of the intermediate product the mixture was stored in the fridge overnight. The precipitate (HCI salt) was filtered, washed with a small quantity of cold isopropanol and dried. The intermediate (0. 17 MMOL), the corresponding phenylboronic acid (0. 2 mmol), Na2CO3 (0. 58 mmol) and Pd (PPh3) 2CI2 (3 mol%) were suspended in a mixture of DME/ETOH/WATER (1. 5 ML/0. 3 ML/0. 2 ML). The mixture was heated in the microwave at 125C for 1200 s. H20 (30 ml) was added and the mixture extracted twice with EtOAc (40 ML). Saturated NH4CI solution (20 ml) was added to the water phase and extracted again twice with EtOAc (40 ml). The combined organics were washed with brine and dried over NA2SO4. After evaporation of the solvent the residue was taken up in DMSO and purified via prep.-HPLC (XTerra Prep. MS C18 5 um, 19 X 150 mm, gradient from water to MeCN over 13 min).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 6-Nitroindoline, its application will become more common.

Reference:
Patent; AXXIMA PHARMACEUTICALS AG; WO2005/26129; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 667463-64-1, These common heterocyclic compound, 667463-64-1, name is 6-Bromo-1-methylindoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

I-12.1 (15.0 g, 63 mmol) and hydrazine hydrate (30 mL, 618 mmol) are heated to 125 C. for 72 h. To the cool reaction mixture DCM is added and extracted with water and 1 M HCl. The organic layer is dried over MgSO4 and concentrated. The crystallized residue is dissolved in DCM, methanol is added and the DCM is removed in vacuo. The crystallized product is filtered by suction and washed with cold methanol. Yield 63%, m/z 226/228 [M+H]+, rt 1.16 min, LC-MS Method V001-003.

The synthetic route of 667463-64-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ANDERSKEWITZ, Ralf; BINDER, Florian; GRAUERT, Matthias; GRUNDL, Marc; HAEBEL, Peter Wilhelm; OOST, Thorsten; PAUTSCH, Alexander; PETERS, Stefan; VINTONYAK, Viktor; US2014/275025; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Reference of 3891-07-4, These common heterocyclic compound, 3891-07-4, name is 2-(2-Hydroxyethyl)isoindoline-1,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 1 Preparation of Ethyl 4-(2-(Phthalimido)Ethoxy)Acetoacetate (Formula V) 300 liters of toluene was taken into a clean and dry reactor and 50 Kg of sodium hydride was added under a nitrogen atmosphere. 50 Kg of [N-{2-hydroxyethyl}] phthalimide was added to the reactor and the resultant reaction mass was subjected to agitation and heating to 57 C. The reaction mass was maintained at 56-57 C. for 30 minutes. Another 50 Kg of [N-{2-hydroxyethyl}] phthalimide was added to the above reaction mass in 18 lots of 2.7 kg each and a further lot of 1.4 kg, at 60 C. Liberation of hydrogen was observed. The reaction mass was maintained at 57 C. until hydrogen gas liberation ceased. A solution of 94 Kg of ethyl 4-chloroacetoacetate in 287 liters of toluene was added to the above reaction mass at 57 C. and maintained at the same temperature for 20 minutes. The reaction mass was then cooled to 30 C. and then further cooled to 17 C. 200 liters of glacial acetic acid was added to the above obtained reaction mass in three equal lots at 17 C. and stirred for 30 minutes. 1000 liters of water was added to the reaction mass and stirred for 20 minutes. The organic layer was separated and the aqueous layer was extracted into 220 liters of toluene. The combined toluene layer was progressed to the next stage.

The synthetic route of 3891-07-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bolugoddu, Vijayabhaskar; Dahyabhai, Jaydeepkumar Lilakar; Pingili, Ramachandra Reddy; Veeraboina, Madhu Raju; Gade, Srinivas Reddy; Mallepalli, Srinivas Reddy; Amirisetty, Ravindranath Tagore; US2007/260065; (2007); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 923590-95-8, name is 4-Bromoisoindoline hydrochloride, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 923590-95-8, SDS of cas: 923590-95-8

Step e. TEA (126 ml, 903 mmol) was added drop-wise over 5 min to a stirred suspension of 4- bromoisoindoline HQ (100 g, 430 mmol) in THF (700 ml) and the mixture was cooled to 10C. The cooled mixture was then treated with a solution of di-tert-butyl dicarbonate (122 g, 559 mmol) in THF (300 ml) over 15 min whilst maintaining the temperature below 20C, and the resulting mixture was stirred at rt for 12 h. The reaction was concentrated under vacuum to give an oil, which was partitioned between EtOAc (600 ml) and water (600 ml). The aqueous phase was collected and extracted with EtOAc (2 chi 500 ml), and the combined organic extracts were washed with brine, dried over Na2S04, filtered and evaporated to dryness under vacuum to give the crude product as a solid (161 g). The crude solid was slurried in hexane (150 ml), filtered and the resulting solid washed with hexane (60 ml) before being dried under vacuum at rt to give the desired product as a solid (95.7 g, 75%). LCMS (Method R): rt 3.02 min, m/z 242 (-tBu)/198(-Boc) [M+H]+; NMR (400 MHz, DMSO-d6) delta ppm 7.51-7.46 (dd, J = 7.8, 0.6 Hz, 1H), 7.38-730 (m, 1H), 7.29-7.21 (m, 1H), 4.73- 4.63 (d, 2H), 4.56-4.47 (d, 2H), 1.50-1.42 (d, 9H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Bromoisoindoline hydrochloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MISSION THERAPEUTICS LIMITED; GIBSON, Karl Richard; JONES, Alison; KEMP, Mark Ian; MADIN, Andrew; STOCKLEY, Martin Lee; WHITLOCK, Gavin Alistair; WOODROW, Michael D; (241 pag.)WO2017/158388; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem