Month: May 2021

Related Products of 56341-37-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 56341-37-8 name is 6-Chlorooxindole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: To the 3-subtitutedphenyl-1H-pyrazole-5-carbaldehydes 11(a-d) prepared in the above step was added corresponding substituted oxindoles and catalytic amount of piperdine (1.0ml) in ethanol. Heated the reaction mixture to reflux for 4h at 85C. The solid compounds obtained in the reaction vessel were filtered and washed with ethanol for 4-5 times. After complete air drying the final compounds (Z)-3-((3-phenyl-1H-pyrazol-5-yl)methylene)indolin-2-one analogs 12(a-u) were obtained as pure solids (yield 75-80%).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 6-Chlorooxindole, and friends who are interested can also refer to it.

21857-45-4, name is 5-Methoxyindoline, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 21857-45-4

General procedure: Method I: 4-chloro-2-substituted quinazoline (1.0 mmol), 5-methoxyindoline or 6-substituted-1,2,3,4-tetrahydroquinoline or 7-methoxy-2,3,4,5-tetrahydro-1H-benzo[b or c]azepine (1.2 mmol) and sodium bicarbonate (3.0 mmol) were added to anhydrous ethanol (5 ml), reacted at room temperature or under refluxing condition for 1-10 h. After the end of reaction, the reactants were poured into ice-water, adjusted pH with 2N hydrochloric acid to 3, extracted with ethyl acetate, dried with anhydrous sodium sulfate. The solvent was removed under vacuum, and the resultant crude product was separated by silica gel column chromatography (eluent: ethyl acetate and petroleum ether for gradient elution, ethyl acetate 5%-80%). Example 7 2-Methyl-4-[N1-(5-methoxy)indolinyl]quinazoline (Method I, Compound 8) [0165] 8 was obtained after reaction at room temperature for 1 h, which was yellow solid, 242 mg, yield 77%, melting point 116-117 C. 1H NMR (CDCl3): delta ppm 2.70 (3H, s, CH3), 3.19 (2H, t, J=8.0 Hz, 3?-CH2), 3.81 (3H, s, OCH3), 4.45 (2H, t, J=8.0 Hz, 2?-CH2), 6.69 (1H, dd, J=8.8 Hz and 2.4 Hz, ArH-6?), 6.86 (1H, d, J=2.4 Hz, ArH-4?), 7.37 (2H, m, ArH-7? and ArH-6), 7.73 (1H, t, J=7.6 Hz, ArH-7), 7.84 (1H, d, J=8.4 Hz, ArH-5), 8.03 (1H, d, J=8.4 Hz, ArH-8). MS m/z (%) 292 (M+H+, 100).

The synthetic route of 21857-45-4 has been constantly updated, and we look forward to future research findings.

Reference of 59-48-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 59-48-3, name is Indolin-2-one belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

5-Acetyl-2-oxindole 2-Oxindole (3 g) was suspended in 1,2-dichloroethane and 3.2 ML acetyl chloride were slowly added.. The resulting suspension was heated to 50 C. for 5 hours, cooled, and poured into water.. The resulting precipitate was collected by vacuum filtration, washed copiously with water and dried under vacuum to give 2.9 g (73% yield) of the title compound as a brown solid.

The synthetic route of Indolin-2-one has been constantly updated, and we look forward to future research findings.

Electric Literature of 5332-26-3,Some common heterocyclic compound, 5332-26-3, name is 2-(Bromomethyl)isoindoline-1,3-dione, molecular formula is C9H6BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The starting carborane, 1-C6H5-1,2-C2B10H11 1.00 g (4.53 mmol) dried in vacuum, was dissolved in DME (40 ml) in Schlenk-type flask under argon, and the resulting solution was cooled down to -33 C. and BuLi (2.5 M in hexane, Aldrich, 2.0 ml, 5.0 mmol) was added under stirring from a syringe through septum. The reaction slurry was stirred for 15 min. and then left to warm up to room temperature. The reaction mixture was again cooled down and bromomethyl phtalimide 1.20 g (Aldrich, 5.0 mmol) dissolved in v 15 ml of DME was added dropwise from a syringe. The reaction mixture was stirred for 15 min. -33 C. at and then left slowly to warm up to room temperature over 4 h period. After standing overnight, the solids were filtered off under argon, and washed under argon with two portions of DME (10 ml). Diluted acetic acid (3 M, 0.5 ml) was added to the combined DME extracts and volatiles were removed under reduced pressure. A solid residue was dissolved in benzene and poured atop of a silica gel column (3*25 cm). Elution with benzene led to isolation of the starting 1-Ph-carborane (240 mg), continued elution using benzene-CH3CN (4:1, b.v.) solvent mixture afforded the methylene-phtalimide substituted intermediate carborane 0.85 g (49%).

The synthetic route of 5332-26-3 has been constantly updated, and we look forward to future research findings.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6341-92-0, name is 6-Chloroisatin, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 6-Chloroisatin

General procedure: In a 25 mL round bottom flask, isatins 1 (1 mmol), 3-phenylisoxazol-5(4H)-one 2 (1 mmol) or 3-ethylisoxazol-5(4H)-one 7 (1 mmol), pyrazol-5-amine 3 (1 mmol) or 6-aminopyrimidine-2,4-(1H,3H)-dione 5 (1 mmol), and Amberlyst-15 (100 mg) were stirred in CH3OH (5.0 mL) at 80 C. When the reaction was completed (detected by TLC), the spherical catalyst was separated by a sieve at once under hot condition. Then, the reaction mixture was cooled to room temperature, and solid precipitation occurred. After filtration, the crude product was recrystallized from EtOH and DMF to give pure compound.

According to the analysis of related databases, 6341-92-0, the application of this compound in the production field has become more and more popular.

Reference of 150560-58-0, A common heterocyclic compound, 150560-58-0, name is 5-Isopropylindoline-2,3-dione, molecular formula is C11H11NO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Isatin based oxadiazole were synthesized in two steps, first semicarbazide(1 mmol, 0.71 g) and different substituted benzaldehydes(1 mmol) were mixed and reflux in methanol for 2-3 hrs. The completionof reaction was monitored by TLC. After completion of reaction,the intermediate was further cyclized by treating it with iodine andpotassium carbonate in 1, 4-dioxane to give a 2-aminooxadiazolemoiety. After drying, it was reacted with 5% Na2S2O3 (20 mL) and then it was extracted the desired organic compound from the reaction mixtureusing CH2Cl2/MeOH (10:1, 10 mL×4). The desired organiccompound was dried over anhydrous sodium sulphate and was purifiedusing petroleum ether and ethylacetate mixture as eluent through silicagel column chromatography afford the synthesis of correspondinganalogs. In the second step, 1 mmol of synthesized 2-aminooxadiazolewere refluxed with different substituted isatin in methanol in the presenceof few drops of glacial acetic acid for 3hrs. Reaction completionwas monitored through TLC. After completion of reaction, reactionmixture was washed with chloroform/hexane to obtained desired differentisatin based oxadiazole.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Electric Literature of 32692-19-6, These common heterocyclic compound, 32692-19-6, name is 5-Nitroindoline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

7-Bromo-5-nitroindoline To a solution of 5-nitroindoline (from Aldrich, 2.0 g, 12.2 mmol) in 15 mL of AcOH was added Br2 (1.0 mL, 19.4 mmol) in a portion and the resulting solution was stirred for 1 h at 25 C. Reaction mixture was concentrated in vacuo, yielding a yellow solid (3.9 g, >95%) of the desired product as a HBr salt, which was subjected to the following reaction without further purification.

The synthetic route of 32692-19-6 has been constantly updated, and we look forward to future research findings.

Electric Literature of 667463-64-1,Some common heterocyclic compound, 667463-64-1, name is 6-Bromo-1-methylindoline-2,3-dione, molecular formula is C9H6BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 2: Synthesis of Intermediate I-4.2 [0294] I-4.1 (15.0 g, 63 mmol) and hydrazine hydrate (30 mL, 618 mmol) are heated to 125 C. for 72 h. To the cool reaction mixture DCM is added and extracted with water and 1 M HCl. The organic is layer is dried over MgSO4 and concentrated. The crystallized residue is dissolved in DCM, methanol is added and the DCM is removed in vacuo. The crystallized product is filtered by sunction and washed with cold methanol. Yield 63%, m/z 226/228 [M+H]+, rt 1.16 min, LC-MS Method V001-003.

The synthetic route of 667463-64-1 has been constantly updated, and we look forward to future research findings.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7477-63-6, name is 7-Chloroisatin, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 7-Chloroisatin

General procedure: A mixture of isatins 1 (1 mmol), substituted 1H-pyrazol-5-amine 2 (1 mmol), 6-aminopyrimidine-2,4(1H,3H)-dione 3 or 6-amino-1,3-dimethylpyrimidine-2,4(1H,3H)-dione 5 (1 mmol), H2O(6 mL), and HOAc (2 mL) was placed in a 25-mL flask andstirred at 90 °C (monitored by thin layer chromatography (TLC)) for about 7 h. Afterreaction completion, the mixture was cooled to room temperature and the precipitateobtained by filtration. Compounds 4 or 6 were further purified by recrystallizationfrom DMF.

According to the analysis of related databases, 7477-63-6, the application of this compound in the production field has become more and more popular.

Application of 39755-95-8, The chemical industry reduces the impact on the environment during synthesis 39755-95-8, name is 5-Methoxyisatin, I believe this compound will play a more active role in future production and life.

General procedure: A mixture of malononitrile (1 mmol), isatin (1 mmol), dicarbonyl (1 mmol), PEGOSO3H(0.1 mmol), and water (2 mL) was stirred under reflux for the appropriate time (shown in Tables 3, 4). After completion of the reaction, the reaction mixture was filtered and the residue was washed with ethanol. The crude solid product was recrystallized from EtOH to afforded the pure products in high purity and yield.Assignment of the structures of the products was based on their 1H NMR, 13C NMR,and IR spectra.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methoxyisatin, other downstream synthetic routes, hurry up and to see.