Month: May 2021

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 893620-44-5, name is 6-Bromo-5-fluoroindolin-2-one, A new synthetic method of this compound is introduced below., COA of Formula: C8H5BrFNO

d) 6-Bromo-5-fluoro-1,3,3-trimethylindolin-2-one To a suspension of NaH (5.04 g, 126 mmol) in tetrahydrofuran (105 ml) 6-bromo-5- fluoroindolin-2-one (7.24 g, 31.5 mmol) was added portionwise under an argon atmosphere. After gas evolution had ceased methyl iodide (17.9 g, 7.88 ml, 126 mmol) was added dropwise within 50 minutes by means of a syringe pump (exothermic reaction), keeping the temperature of the reaction mixture between 24 C and 26 C. The reaction mixture was kept at roomtemperature for 4 hours and then carefully quenched with aqueous ammonium chloride solution. The reaction mixture was diluted with tert-butyl methyl ether, water and saturated aqueous ammonium chloride solution. The aqueous phase was extracted with tert-butyl methyl ether, the combined organic phases were washed with saturated aqueous ammonium chloride and dried over sodium sulfate. The solvent was evaporated and the residue was triturated with heptane to give the title compound as light brown solid (7.87 g).MS ESI (m/z): 272.1, 274.1 [(M+H)i.H NMR (CDC13, 400 MHz): (ppm) = 7.02-6.97 (m, 2H), 3.19 (s, 3H), 1.36 (s, 6H).

The synthetic route of 893620-44-5 has been constantly updated, and we look forward to future research findings.

These common heterocyclic compound, 169037-23-4, name is 5-(Trifluoromethoxy)indoline-2,3-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C9H4F3NO3

General procedure: A mixture of 5,6-dimethoxy-2-[(E)-1-arylmethylidene]-1-indanone (1, 0.364 mmol), thiazolidine-4-carboxylic (3, 0.364 mmol) and 1-morpholinoindoline-2,3-dione (2,0.364 mmol) was dissolved in methanol (1 mL) and irradiated for 2-3.5 min in a CEM microwave synthesizer (100 0C, 100 W). After completion of the reaction as evident from TLC, the mixture was poured into water. The precipitated solid was filtered and washed with water to afford the products 4a-i which was purified by recrystallisation.

The synthetic route of 5-(Trifluoromethoxy)indoline-2,3-dione has been constantly updated, and we look forward to future research findings.

Reference of 3339-73-9,Some common heterocyclic compound, 3339-73-9, name is 3-(1,3-Dioxoisoindolin-2-yl)propanoic acid, molecular formula is C11H9NO4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

30-a: Place 2-TBS-lycoline (1.0 mmol), 3-phthalimidopropionic acid (1.2 mmol), EDCI (1.2 mmol), DMAP (0.12 mmol), 15 ml of dichloromethane, place in In a 50ml reaction flask, stir at room temperature until no raw materials remain. Transfer to a separatory funnel, add 50 ml of dichloromethane, wash the organic phase with saturated sodium bicarbonate solution, water, and saturated sodium chloride solution, dry over anhydrous sodium sulfate, and concentrate for later use.30-b: Put the above product, TBAF (2.0 mmol), 15 ml of THF, into a 50 ml reaction bottle, and stir at room temperature until no raw materials remain. Transfer to a separatory funnel, add 50 ml of dichloromethane, wash the organic phase with saturated sodium bicarbonate solution, water, and saturated sodium chloride solution, dry over anhydrous sodium sulfate, concentrate, and separate by column chromatography to obtain a yellow solid (28.4% ).

The synthetic route of 3339-73-9 has been constantly updated, and we look forward to future research findings.

Synthetic Route of 56341-37-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 56341-37-8, name is 6-Chlorooxindole belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

3-Chloro-2-fluorobenzaldehyde (6.24 g, 39.4 mmol) was added to a solution of piperidine (3.88 mL, 39.4 mmol) and 6-chlorooxindole (6.0 g, 35.8 mmol) dissolved in methanol (100 mL). After stirring overnight, the resulting solid was filtered and washed with methanol and hexanes to give 10.6 g of (E)-6-chloro-3-(3-chloro-2-fluorobenzylidene)indolin-2-one (3) as a green solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 6-Chlorooxindole, other downstream synthetic routes, hurry up and to see.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 15362-40-0, name is 1-(2,6-Dichlorophenyl)-2-indolinone belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1-(2,6-Dichlorophenyl)-2-indolinone

General procedure: A finely ground mixture of 5-substituted indole-3-carboxaldehyde (1 mmol) and active methylene compound (indolinone/oxindole/barbituric acid/1-(3-chlorophenyl)-3-methyl-2-pyrazolin-5-one)/2-trifluoromethylbenzaldehyde (1.2 mmol) was irradiated in microwave oven for 1-5 min. The solid product was washed with diethyl ether and purified by column chromatography to get pure products 2-5 and 11-28 except compound 3. Compound 3 was prepared by treatment of 5-substituted indole-3-carboxaldehyde with indolinone in ethanol-water in presence of NaOH (1.5 mmol).

The synthetic route of 15362-40-0 has been constantly updated, and we look forward to future research findings.

Electric Literature of 6341-92-0, A common heterocyclic compound, 6341-92-0, name is 6-Chloroisatin, molecular formula is C8H4ClNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of isatins 1 (1 mmol), substituted 1H-pyrazol-5-amine 2 (1 mmol), 6-aminopyrimidine-2,4(1H,3H)-dione 3 or 6-amino-1,3-dimethylpyrimidine-2,4(1H,3H)-dione 5 (1 mmol), H2O(6 mL), and HOAc (2 mL) was placed in a 25-mL flask andstirred at 90 C (monitored by thin layer chromatography (TLC)) for about 7 h. Afterreaction completion, the mixture was cooled to room temperature and the precipitateobtained by filtration. Compounds 4 or 6 were further purified by recrystallizationfrom DMF.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 32692-19-6 as follows. name: 5-Nitroindoline

EXAMPLE 10 Preparation of 1-benzyl-5-nitro-2,3-dihydro-1H-indole Under the presence of nitrogen, 5-nitroindolin (50 mg, 0.30 mmol) was dissolved in dimethylformamide (2 ml) at room temperature and benzyl bromide (0.04 ml. 0.34 mmol) and potassium carbonate (0.126 ml, 3.0 equivalent) were added and stirred at room temperature for 48 hours. After completing the reaction, water and ethyl acetate (respectively 5 ml) were added to separate layers, washed with brine, dried over anhydrous magnesium sulfate, and concentrated. Finally, the residue was purified through flash column chromatography (an eluent: ethyl acetate/n-hexane=1/4, v/v). As a result, the present compound (45 mg, productive yield 58%) was obtained. 1H-NMR (400 MHz, CDCl3) delta3.10 (t, J=9 Hz, 2H), 3.65 (t, J=9 Hz, 2H), 4.45 (s, 2H), 6.35 (d, J=9 Hz, 1H), 7.25-7.45 (m, 5H), 7.90 (s, 1H), 8.05-8.10 (m, 1H) melting point: 73~74 C.

According to the analysis of related databases, 32692-19-6, the application of this compound in the production field has become more and more popular.

Adding a certain compound to certain chemical reactions, such as: 5428-09-1, name is 2-Allylisoindoline-1,3-dione, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 5428-09-1, Formula: C11H9NO2

General procedure: A magnetically stirred solution of N-allylphthalimide 4 (1 equiv) and a xanthate 3 (2-4 equiv) in 1,2-dichloroethane (2-4 mL/mmol of N-allylphthalimide) was heated at reflux for 15 min. DLP (3-5 mol percent) was added and additional DLP (5 mol percent) was added per hour until complete consumption of 4. The mixture was allowed to cool to room temperature and the solvent was evaporated under reduced pressure. The residue was purified by flash chromatography on silica gel to yield the desired product 5.#10;

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Allylisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Adding a certain compound to certain chemical reactions, such as: 6341-92-0, name is 6-Chloroisatin, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6341-92-0, Computed Properties of C8H4ClNO2

General procedure: In the presence of K2CO3 (1mol) and tetrabutylammonium bromide (1mol), isatin or substituted isatin 6a-i (0.5mol) was reacted with BnBr or CH3I (1mol) in DMF (6L) and the reaction mixture was stirred 12h at room temperature. Intermediates 6j-p were obtained by filtration and purified by recrystallization from acetic acid with high yield (72.7%-85.1%).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 6-Chloroisatin, and friends who are interested can also refer to it.

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 172078-33-0 as follows. Formula: C8H9NO

Take one 100mL eggplant-shaped bottle, add 0.54g (4.00mmol) 5-hydroxyindoline, 1.36g (4.16mmol) Cs2CO3 and 30mL absolute ethanol, stir at room temperature for 1h, and 0.79g (3.97mmol) 3a- 1 or 3a-2 and 0.10g (0.60mmol) KI were put into the reaction solution, and the reaction was refluxed at 80 for more than 4h. The progress of the reaction was monitored by thin layer chromatography until the 5-hydroxyindoline point completely disappeared, and vacuum distillation The solvent was removed, and the residue was a pale yellow solid. The residue was dissolved with 30 mL each of water and ethyl acetate. The liquid was separated. The aqueous phase was extracted twice with ethyl acetate, 15 mL each time. The organic phases were combined, washed with water, and washed with saturated brine. Dry over anhydrous sodium sulfate, filter to remove sodium sulfate, the filtrate was distilled under reduced pressure to remove the solvent, the residue was sampled with 100-200 mesh silica gel, and separated by column chromatography (PE:EA=12:1 elution) to give a light yellow oil 4-((Indoline-5-)oxymethyl) benzaldehyde (4d-3, 0.72g, yield 71.29%) or 3-((Indoline-5-)oxymethyl) benzaldehyde (4d-4, 0.77g, yield 76.24%).

According to the analysis of related databases, 172078-33-0, the application of this compound in the production field has become more and more popular.