Month: March 2021

Reference of 40314-06-5, The chemical industry reduces the impact on the environment during synthesis 40314-06-5, name is 5-Methylisoindoline-1,3-dione, I believe this compound will play a more active role in future production and life.

General procedure: Phthalic anhydride or its derivatives (2.0 mmol) and 4-aminobutyric acid (2.0 mmol) were added to glacial acetic acid (10 mL) and heated to 100 C for 3 h. The reaction was quenched with water (10 mL) and was adjusted to pH 6-8 with NaOH (0.1 mol/L). The mixture was extracted with dichloromethane (10 mL ¡Á 3), and the organic layer was washed with aq. NaHCO3, and water and then evaporated to afford intermediate.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methylisoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Wu, Hongna; Wu, Jun; Zhang, Wenxuan; Li, Zhongwen; Fang, Jinhui; Lian, Xu; Qin, Tong; Hao, Jie; Zhou, Qi; Wu, Song; Bioorganic and Medicinal Chemistry Letters; vol. 29; 7; (2019); p. 870 – 872;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 959235-95-1, name is 6-(Trifluoromethoxy)indoline, This compound has unique chemical properties. The synthetic route is as follows., Safety of 6-(Trifluoromethoxy)indoline

HATU (1 .54 g, 4.06 mmol) was added to a mixture of 6-(trifluoromethoxy)indoline [CAS 953906-76-8] (550 mg, 2.70 mmol), 2-(4-chloro-2-fluorophenyl)-2-((3- (2-hydroxyethoxy)-5-methoxyphenyl)amino)acetic acid 2e (1 g, 2.70 mmol) and diisopropylethylannine (1 .34 mL, 8.1 1 mmol) in DMF (30 mL). The resulting mixture was stirred at room temperature for 12 h. The mixture was diluted with water. The precipitate was filtered off, and washed with water. The solid was dissolved in EtOAc, washed with a 10% solution of K2CO3 in water and then with brine. The organic layer was dried over MgSO4, filtered, and the solvent was evaporated under reduced pressure. The crude residue was purified by flash chromatography on silica gel (15-40 muetaeta, 80 g, CH2CI2/MeOH 99.5/0.5) to afford 2-(4-chloro-2-fluorophenyl)-2-((3-(2-hydroxyethoxy)-5-methoxyphenyl)amino)-1 -(6-(trifluoro- methoxy)indolin-1 -yl)ethanone (Compound 6, 500 mg). An analytical sample of Compound 6 was obtained by crystallized from diisopropyl ether. Compound 6: 1H NMR (500 MHz, DMSO-cfe) delta ppm 3.14 – 3.22 (m, 2 H) 3.58 – 3.68 (m, 5 H) 3.80 – 3.90 (m, 2 H) 4.05 – 4.15 (m, 1 H) 4.38 – 4.47 (m, 1 H) 4.80 (t, J=5.5 Hz, 1 H) 5.70 (d, J=9.1 Hz, 1 H) 5.79 (t, J=1 .9 Hz, 1 H) 5.93 (d, J=1 .9 Hz, 2 H) 6.63 (d, J=9.1 Hz, 1 H) 7.03 (dd, J=8.2, 1 .6 Hz, 1 H) 7.31 – 7.37 (m, 2 H) 7.42 – 7.51 (m, 2 H) 8.02 (s, 1 H) LC/MS (method LC-A): Rt 3.39 min, MH+ 555 Melting point: 166C

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 959235-95-1.

Reference:
Patent; JANSSEN PHARMACEUTICALS, INC.; KATHOLIEKE UNIVERSITEIT LEUVEN; BARDIOT, Dorothee Alice Marie-Eve; BONFANTI, Jean-Francois; KESTELEYN, Bart Rudolf Romanie; MARCHAND, Arnaud Didier M; RABOISSON, Pierre Jean-Marie Bernard; (76 pag.)WO2017/167953; (2017); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 52351-75-4, name is 6-Methoxyindoline-2,3-dione, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 6-Methoxyindoline-2,3-dione

General procedure: Isatin derivatives (S1) were synthesized by treating isatins with NaH and then reacting with methyl iodide or benzyl bromide or allyl bromide, respectively, in dry DMF at room temperature.

According to the analysis of related databases, 52351-75-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Zhang, Lin-Lin; Da, Bing-Chao; Xiang, Shao-Hua; Zhu, Shuai; Yuan, Zi-Yun; Guo, Zhen; Tan, Bin; Tetrahedron; vol. 75; 12; (2019); p. 1689 – 1696;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16800-68-3, name is 1-Acetylindolin-3-one, A new synthetic method of this compound is introduced below., Application In Synthesis of 1-Acetylindolin-3-one

General procedure: To a solution of 1a (35 mg, 0.2 mmol) and 2a (52.4 mg,0.4 mmol) in DCE (3 mL) was added iodine (10 mg, 0.04 mmol). The reaction mixture was heated at 80 C for 24 h, then cooled to room temperature and quenched with saturated sodium thiosulfate. The mixture was extracted with CH2Cl2, the combined organic layer was dried over Na2SO4 and concentrated under reduced pressure. The crude product was purified by flash column chromatography on silica gel to afford title compound.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Guo, Jing; Weng, Jiang; Huang, Gong-Bin; Huang, Lin-Jie; Chan, Albert S.C.; Lu, Gui; Tetrahedron Letters; vol. 57; 49; (2016); p. 5493 – 5496;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 2058-74-4, A common heterocyclic compound, 2058-74-4, name is 1-Methylisatin, molecular formula is C9H7NO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Indole-2,3-dione 1 (1 mmol) and 1,2-diamine 2 (1 mmol) and 5 mol% of Cu doped CdS NPs in ethylene glycol (10 ml) was introduced in a 50 ml round-bottomed flask. The flask was placed in the microwave cavity and subjected to irradiation for appropriate time at 80 C using a maximum power of 300 W. When the reaction was complete, the reaction mixture was extracted with ethylacetate; the organic layer was removed under reduced pressure to afford the crude product. The pure products were obtained by crystallization from ethanol.

The synthetic route of 2058-74-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Dandia, Anshu; Parewa, Vijay; Maheshwari, Shuchi; Rathore, Kuldeep S.; Journal of Molecular Catalysis A: Chemical; vol. 394; (2014); p. 244 – 252;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 6941-75-9,Some common heterocyclic compound, 6941-75-9, name is 5-Bromoisoindoline-1,3-dione, molecular formula is C8H4BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a suspension of 5-bromo-1 H-isoindole-1 ,3(2H)-dione (ABCR, 5.Og) and triphenylphosphine (8.7Og) in tetrahydrofuran (THF) (10OmL) under nitrogen at room temperature was added di-t-butyl azodicarboxylate (7.64g). The suspension was cooled in an ice/water bath and to this was added iso-propanol (2.032 ml_). The reaction mixture was allowed to warm to room temperature to give a pale yellow solution. After 60 minutes, the solvent was removed in vacuo and the residue was dissolved in DCM (3OmL). This was applied to a 75Og silica cartridge and eluted with a gradient of 0-40% ethyl acetate in cyclohexane over 8CV. The required fractions were combined and evaporated in vacuo to give the title compound (5.27g) as a pale yellow solid.1H NMR (CDCI3): 7.95 (1 H, d, J=1.5Hz), 7.84 (1 H, dd, J=1.5, 8Hz), 7.68 (1 H, d, J=8Hz), 4.53 (1 H, heptet, J=7Hz), 1.49 (6H, d, J=7Hz)

The synthetic route of 6941-75-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GLAXO GROUP LIMITED; JIN, Qi; WO2010/102968; (2010); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 56341-37-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 56341-37-8, name is 6-Chlorooxindole belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Example 30 Preparation of intermediate E/Z-3-[4-(tert-butyl-dimethyl-silanyloxy)-3,3-dimethyl-butylidene]-6-chloro-1,3-dihydro-indol-2-one To the mixture of 6-chlorooxindole (2.1 g, 12.6 mmol) (Crescent) and 4-(tert-butyl-dimethyl-silanyloxy)-3,3-dimethyl-butyraldehyde (2.9 g, 12.6 mmol) in methanol (80 mL) was added a methanolic solution (25%, Aldrich) of sodium methoxide (4.08 g, 18.9 mmol) dropwise. The reaction mixture was stirred at room temperature for 10 min. The solvent was removed, and the residue was partitioned between ethyl acetate and water. The organic layer was separated, dried over Na2SO4, and concentrated. The residue was purified by chromatography (20% EtOAc in hexanes) to give E/Z-3-[4-(tert-butyl-dimethyl-silanyloxy)-3,3-dimethyl-butylidene]-6-chloro-1,3-dihydro-indol-2-one as a yellow oil (Yield 4.1 g, 84%).

The synthetic route of 6-Chlorooxindole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Liu, Jin-Jun; Zhang, Jing; Zhang, Zhuming; US2011/201635; (2011); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Related Products of 496-12-8,Some common heterocyclic compound, 496-12-8, name is Isoindoline, molecular formula is C8H9N, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 7 2-(4-bromophenyl)-1-(isoindolin-2-yl)ethanone [0500] [0501] To a mixture of 2-(4-bromophenyl)acetic acid (300 mg, 1.395 mmol), isoindoline (183 mg, 1.535 mmol), and HATU (796 mg, 2.093 mmol) in DMF (5 mL), was add DIEA (0.487 mL, 2.79 mmol). The mixture was stirred at rt overnight. The reaction mixture was quenched with water, then extracted with EtOAc. The organic phase was washed with 10% LiCl, brine, and concentrated. The residue was purified via flash chromatography (EtOAc/hexane) to afford 390 mg (88%) of Intermediate 7. [0502] MS (ESI) m/z: 316.0 (M+H)+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Isoindoline, its application will become more common.

Reference:
Patent; Glunz, Peter W.; Zou, Yan; Quan, Mimi L.; US2014/206686; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Electric Literature of 5394-18-3, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 5394-18-3, name is 2-(4-Bromobutyl)isoindoline-1,3-dione, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: To a suspension of the corresponding secondary amine (3.22 mmol) and anhydrous K2CO3 (765 mg, 5.48 mmol) in CH3CN (20 mL) was added the intermediates 3-5 (0.60 mmol). The mixture was refluxed for 6-8 h. The solvent was removed under reduced pressure. The residue was diluted with water (30 mL) and the mixture was extracted with dichloromethane (30 mL¡Á3). The combined organic phases were washed with brine, dried over sodium sulfate, filtered and concentrated under reduced pressure. The residue was purified on a silica gel chromatography in petroleum ether/acetone (20/1, v/v) to afford compound 7-9

The chemical industry reduces the impact on the environment during synthesis 2-(4-Bromobutyl)isoindoline-1,3-dione. I believe this compound will play a more active role in future production and life.

Reference:
Article; Song, Qing; Li, Yan; Cao, Zhongcheng; Qiang, Xiaoming; Tan, Zhenghuai; Deng, Yong; Bioorganic Chemistry; vol. 84; (2019); p. 137 – 149;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 2058-72-2,Some common heterocyclic compound, 2058-72-2, name is 5-Bromo-1-methylindoline-2,3-dione, molecular formula is C9H6BrNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of substituted isatin 1 (0.5 mmol), cyclic 1,3-dicarbonyl 2 (0.55 mmol), 4-hydroxyl coumarin 3 (0.55 mmol) and I2 (0.05 mmol) in DCE (2 mL) was heated at 60 C under atmosphere. The progress was monitored using TLC detection. After completion of the present reaction, the reaction mixture was concentrated under vacuum. The residue was purified by column chromatography [eluent, petroleum ether/ethyl acetate 5:1] to afford the desired products 4.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromo-1-methylindoline-2,3-dione, its application will become more common.

Reference:
Article; Zhang, Min; Yang, Wenbo; Qian, Min; Zhao, Ting; Yang, Liuqing; Zhu, Chunyin; Tetrahedron; vol. 74; 9; (2018); p. 955 – 961;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem