Month: March 2021

Electric Literature of 56341-37-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 56341-37-8, name is 6-Chlorooxindole belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Under argon atmosphere, 3,5-bis(trifluoromethyl)phenylisocyanate(255mg, 1.0mmol) was dissolved in tetrahydrofuran(5mL). A solution of 6-chloro-oxindole(184mg, 1.1mmol) in tetrahydrofuran(5ml) and triethylamine(0.3mL) were added, and the mixture was stirred at room temperature for 4 hours. The reaction mixture was poured into diluted hydrochloric acid and extracted with ethyl acetate. After the organic layer was washed with water and brine, dried over anhydrous magnesium sulfate, the residue obtained by evaporation under reduced pressure was purified by chromatography on silica gel(n-hexane:ethyl acetate=4:1) to give the title compound(172.2mg, 40.7%) as a pink solid.1H-NMR(DMSO-d6): delta 3.97(2H, s), 7.29(1H, dd, J=8.1, 2.1Hz), 7.41(1H, d, J=8.1Hz), 7.88(1H, s), 8.04(1H, d, J=2.1Hz), 8.38(2H, s), 10.93(1H, s).

The synthetic route of 6-Chlorooxindole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Institute of Medicinal Molecular Design, Inc.; EP1512396; (2005); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 15362-40-0, name is 1-(2,6-Dichlorophenyl)-2-indolinone, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 15362-40-0, SDS of cas: 15362-40-0

General procedure: Aldehyde (1 mmol) and active methylene component (2.5 mmol) were dissolved in dimethylformamide in a microwave vial, piperidine was added in catalytic amount andthen the reaction mixture was subjected to microwave irradiations for 1h at 150 C. A solid product was separated out which was then filtered andwashed with cold water. The products were further purified by washing with ether/ethanol.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-(2,6-Dichlorophenyl)-2-indolinone, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Kaur, Jagroop; Kaur, Sukhmeet; Singh, Palwinder; Bioorganic and Medicinal Chemistry Letters; vol. 26; 8; (2016); p. 1936 – 1940;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7699-18-5, name is 5-Methoxyindolin-2-one, A new synthetic method of this compound is introduced below., Application In Synthesis of 5-Methoxyindolin-2-one

General procedure: To a one-neck round-bottom flask equipped with magnetic stirringwas added 6-chloro-2-indolinone (2a, 1.00 g, 6.0 mmol),vinamidinium salt 324 (2.02 g, 12.0 mmol), Et3N (1.82 g, 18.0mmol), and DMF (10 mL). The mixture was stirred for 20 h atr.t., after the reaction was complete (monitored by TLC,EtOAc/MeOH = 20:1), 30 mL EtOAc and 30 mL water was added,then the aqueous layer was extracted with 30 mL EtOAc. Thecombined EtOAc layer was washed with sat. NaCl solution (15mL) and water (15 mL) then dried over Na2SO4. After filteringthe desiccant, the solvent was concentrated under vacuum to avolume of about 5 mL. The mixture was titrated with 15 mL nhexaneto give a yellow precipitant, the solid was filtered, anddried under vacuum to give 4a (1.34 g, yield 88%), a yellowpowder, which was used in the next step without further purification;mp > 250 C.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Tian, Shaixiao; Mao, Yu; Jiang, Yongjun; Xu, Guangyu; Synlett; vol. 29; 7; (2018); p. 949 – 953;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Synthetic Route of 24566-79-8, A common heterocyclic compound, 24566-79-8, name is N-(6-Bromohexyl)phthalimide, molecular formula is C14H16BrNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a mixture of the corresponding R1R2NH (3.0 mmol), anhydrous K2CO3 (449 mg, 3.25 mmol) and KI (20.75 mg, 0.125 mmol) in CH3CN (12 ml) were added the appropriate intermediates 6-9 (2.5mmol). The reaction mixture was warmed to 60-65 C and stirred for 6-8 h under an argon atmosphere. After complete reaction, the solvent was evaporated under reduced pressure. Then water (25 mL) was added to the residue and the mixture was extracted with dichloromethane (25 mL¡Á3). The combined organic phases were washed with saturated aqueous sodium chloride (30 mL), dried over sodium sulfate, and filtered. The solvent was evaporated to dryness under reduced pressure. The residue was purified on a silica gel chromatography using mixtures of petroleum ether/EtOAc as eluent, obtaining the corresponding intermediates 10-13a-d.

The synthetic route of 24566-79-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Li, Yuxing; Qiang, Xiaoming; Li, Yan; Yang, Xia; Luo, Li; Xiao, Ganyuan; Cao, Zhongcheng; Tan, Zhenghuai; Deng, Yong; Bioorganic and Medicinal Chemistry Letters; vol. 26; 8; (2016); p. 2035 – 2039;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

324-03-8, name is 6-Fluoroindoline-2,3-dione, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C8H4FNO2

The 6-fluoro-isatin(1.65g, 10mmol)Add 10 mL of acetonitrile to a 100 mL round bottom flask.N-methylpiperazine (1.10 g, 11 mmol) was added dropwise, and the mixture was stirred at room temperature for 4 h. After the reaction was monitored by TLC, purification by column chromatography gave a red solid with a yield of 58%.

The synthetic route of 324-03-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sun Yat-sen University; Huang Zhishu; Tan Jiaheng; Che Tong; (27 pag.)CN107540662; (2018); A;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 17564-64-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 17564-64-6, name is 2-(Chloromethyl)isoindoline-1,3-dione belongs to indolines-derivatives compound, it is a common compound, a new synthetic route is introduced below.

LiHMDS (37 mL of a 1 M solution in THF, 37.0 mmol) was added dropwise to a stirred solution of benzyl 2-methyl-4-oxo-piperidine-1-carboxylate (7.5 g, 30.3 mmol) in THF (150 mL) at -78 C under N2. After 50 minutes, a solution of 2-(chloromethyl)isoindoline-1,3- dione (8.0 g, 40.9 mmol) in THF (30 mL) was added to the reaction mixture over 5 minutes. The solution was stirred for 2 hours then quenched with a saturated aqueous NH4Cl solution. After warming to ambient temperature, the reaction mixture was diluted with EtOAc, washed with saturated aqueous sodium bicarbonate solution and brine. The organic phase was dried (MgSO4), filtered and concentrated in vacuo. The residue was purified by column chromatography (silica, 0- 100% EtAOc/PE gradient elution) to give a mixture of benzyl 5-((1,3-dioxoisoindolin-2- yl)methyl)-2-methyl-4-oxopiperidine-1-carboxylate and benzyl 3-((1,3-dioxoisoindolin-2- yl)methyl)-2-methyl-4-oxopiperidine-1-carboxylate (2.4 g). This material was treated with DAST (8 mL, 61 mmol), with cooling in an ice bath. The resulting solution was stirred at 0 C for 15 minutes, then left to warm up to ambient temperature and stirred for 5 hours. The solution was poured carefully, dropwise, onto a stirred mixture of ice/water/NaHCO3/DCM. After 30 minutes, the organic phase was isolated and washed with brine. The organic was dried (Na2SO4), filtered and concentrated in vacuo. The crude mixture was purified by column chromatography (silica, 0- 100% EtOAc-PE gradient elution) give a colourless oil (1.5 g), of which 540 mg was dissolved in ethanol (15 mL) and hydrazine hydrate (100 muL, 2.0 mmol) added. The mixture was heated under relux for 3 hours then cooled to ambient temperature. The resulting suspension was filtered and the filtrate poured directly onto a pre-wetted ion-exchange cartridge. The cartridge was washed with methanol and the product eluted with a 2 M methanolic ammonia solution. The filtrate was concentrated under reduced pressure to give a pale yellow oil (300 mg). This material was dissolved in DCM (3 mL) and Et3N (200 muL, 1.4 mmol) was added under N2. The solution was cooled in an ice bath and methanesulfonyl chloride (100 muL, 1.3 mmol) added. After 5 minutes the cooling bath was removed and the mixture stirred at ambient temperature for 2 hours. The solution was diluted with DCM and saturated aqueous NaHCO3 solution. After stirring for 5 minutes, the organic phase was isolated using a phase separation cartridge. After concentration in vacuo, the residue was purified by column chromatography (silica, 0-100% [10% MeOH in EtOAc]-PE gradient elution) to give a pale yellow oil (150 mg). This material was taken up in DCM (3 mL) and Pd(OAc)2 (40 mg, 0.18 mmol), Et3SiH (150 muL, 0.94 mmol) and Et3N (100 muL, 0.72 mmol) were added. The reaction mixture was stirred at ambient temperature for 1 hour then diluted with MeOH. It was added onto a pre-wetted ion-exchange cartridge. The cartridge was washed with MeOH then the product eluted with a 2 M methanolic NH3 solution. The filtrate was concentrated under reduced pressure to give a brown oil (70 mg) containing a mixture of N-((4,4-difluoro-2- methylpiperidin-3-yl)methyl)methanesulfonamide A58 and N-((4,4-difluoro-6-methylpiperidin- 3-yl)methyl)methanesulfonamide A59, that was taken directly on to the next reaction; MS m/z: 234 (M+H)+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(Chloromethyl)isoindoline-1,3-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK PATENT GMBH; VERTEX PHARMACEUTICALS INCORPORATED; BAYLY, Andrew; BLEICH, Matthew; CHARRIER, Jean-Damien; DODD, James; DURRANT, Steven; ENO, Meredith Suzanne; ETXEBARRIA I JARDI, Gorka; EVERITT, Simon; FRAYSSE, Damien; KELLY, Shazia; KNEGTEL, Ronald; MOCHALKIN, Igor; MORTIMORE, Michael; NORTH, Kiri; PORICHIS, Filippos; PULLIN, Robert; RUTHERFORD, Alistair; STORCK, Pierre-Henri; TWIN, Heather Clare; XIAO, Yufang; (1159 pag.)WO2019/148132; (2019); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Adding a certain compound to certain chemical reactions, such as: 16800-68-3, name is 1-Acetylindolin-3-one, belongs to indolines-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16800-68-3, Recommanded Product: 1-Acetylindolin-3-one

General procedure: A mixture of 1-acetylindolin-3-ones 1 (0.4mmol), beta,gamma-unsaturated alpha-ketoesters 2 (0.2mmol), amines 3 (0.2mmol) and 4-methylbenzenesulfonic acid monohydrate (19mg, 50mol%) in toluene (1.5mL) was stirred at refluxing temperature under air atmosphere for 48h. After cooling to room temperature, the reaction mixture was directly purified by column chromatography on silica gel (200-300mesh, petroleum ether/ethyl acetate=1/1 to remove the excess 1-acetylindolin-3-one, then eluted with dichloromethane/acetone/triethylamine=90/3/1) to afford the desired 1H-pyrido[3,2-b]indoles 4. The title compounds were fully characterized by 1H NMR, 13C NMR, HRMS and X-ray crystal structure analysis.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Acetylindolin-3-one, and friends who are interested can also refer to it.

Reference:
Article; Jiang, Rongrong; Wang, Youming; Zhou, Zhenghong; Tetrahedron; vol. 72; 41; (2016); p. 6444 – 6449;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Application of 132898-96-5, These common heterocyclic compound, 132898-96-5, name is 2,3-Dioxoindoline-5-sulfonyl chloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A stirred solution of N-Boc protected pyrrolidine (1.00 mmol) in dry DCM (2.2 mL) at 0 C under argon atmosphere was treated dropwise with TFA (10.00 mmol). Stirring was continued at 0 C for 30 min and at ambient temperature for 2 h. Subsequently, the solution was poured to ice-cooled 10% aq NaOH (15 mL) and extracted with DCM (3 ¡Á 15 mL). The combined organic phase was dried over MgSO4 and concentrated in vacuo to obtain a colorless oil as the corresponding unprotected pyrrolidine. After that a solution of the free pyrrolidine and DIPEA (2.00 mmol) in CHCl3 (1.1 mL) was added dropwise to a stirred solution of 5-chlorosulfonyl isatin (1.50 mmol) in CHCl3/THF (1:1, 19 mL) at room temperature. The resulting solution was stirred at room temperature for 1 h and the solvent was completely removed in vacuo. The crude product was purified by flash column chromatography to obtain the corresponding inhibitors.

Statistics shows that 2,3-Dioxoindoline-5-sulfonyl chloride is playing an increasingly important role. we look forward to future research findings about 132898-96-5.

Reference:
Article; Limpachayaporn, Panupun; Schaefers, Michael; Schober, Otmar; Kopka, Klaus; Haufe, Guenter; Bioorganic and Medicinal Chemistry; vol. 21; 7; (2013); p. 2025 – 2036;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 59-48-3, name is Indolin-2-one, A new synthetic method of this compound is introduced below., category: indolines-derivatives

Preparation of 5-Bromo-oxindole Oxindole (1.30 g, 0.010 mmol) was suspended in dry acetonitrile (22.0 mL) under N2 and cooled to -10 C. To this stirred mixture was added recrystallized NBS (2.00 g, 0.011 mol) portionwise. The resulting suspension was stirred at -10 to 10 C. for 3 h. The precipitated solid was collected by filtration, washed with H2O and dried to give the intermediate title compound as an off white solid 1.75 g (82%). Electrospray mass spectrum (M-1)=210, (M-1)=211

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Clemens, James Allen; Lodge, David; US2004/63680; (2004); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem

102359-00-2, name is 2-Oxoindoline-5-carboxylic Acid, belongs to indolines-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Application In Synthesis of 2-Oxoindoline-5-carboxylic Acid

General procedure: Aldehydes (1-5) (0.2 mmol) and oxindoles (7-11) (0.2 mmol) were dissolved in alcohol MeOH, EtOH, or tert-BuOH (1.5 ml). 3 droplets of piperidine were added to the solvents and the reaction mixture was stirred in a sealed vial at 60 – 70 C for 2 – 8 hours.

The synthetic route of 102359-00-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Nemes, Zoltan; Takacs-Novak, Krisztina; Voelgyi, Gergely; Valko, Klara; Beni, Szabolcs; Horvath, Zoltan; Szokol, Balint; Breza, Nora; Dobos, Judit; Szantai-Kis, Csaba; Illyes, Eszter; Boros, Sandor; Kok, Robbert Jan; ?rfi, Laszlo; Bioorganic and Medicinal Chemistry Letters; vol. 28; 14; (2018); p. 2391 – 2398;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem