Synthetic Route of 919103-45-0,Some common heterocyclic compound, 919103-45-0, name is 6-Iodoindolin-2-one, molecular formula is C8H6INO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.
A nitrogen purged vessel is loaded with starting material 6-lodoindolinone (1 05kg,405mo1, 1,0 eq), catalyst 4-dimethylaminopyridine (DMAP) (2,52 kg) under argoncounter flow. Then triethylamine (145 kg, 3,5 eq) and solvent 2-methyltetrahydrofuran(605 kg) are charged to the vessel and the resulting solution is cooled to -15 00 to-S00 (preferentially -10C). Benzoylchloride (176,6 kg, 3,1 eq) is added to this mixture atan internal temperature of 100C to 50C within at least 30mm.The addition funnel is then flushed with 2-methyltetrahydrofuran (22 kg) and the reaction mixture is stirred for an additional hour at an internal temperature of 10 to 30C. If the content of starting material 6-iodoindolinone is greater than 2,5 area%(H PLC), another portion of benzoylchloride (5,7 kg) is added to complete the reaction. If the content of starting material 6-iodoindolinone is smaller than 2,5 area% (H PLC), lithium hydroxide (59,4 kg, 6,0 eq) is added in 5 differently sized portions (1st: 18,0 kg, 2?: 6,0 kg, 3: 6,0 kg, 41h: 15,0 kg, 5th: 14,4 kg) in a temperature controlled manner:After the two first portions, the mixture is stirred for 1 hour. After portion 3 and 4, the mixture is stirred for 30mm. After the last portion, the mixture is stirred for two hours. The reaction mixture (suspension) is then stirred for at least 12 hours at an internal temperature of 20 to 30 C. If the content of the non isolated intermediate of formula (V) is smaller than 0,5 area% (H PLC), water (525 L) is added and the mixture is heatedto an internal temperature of 60 to 7000 under stirring. Then the stirrer is switched off, the mixture is settled down and the phases are separated at an internal temperature of 60 to 70C. To the upper organic layer, water (525 L) is added and a second phase separation is carried out at an internal temperature of 60 to 70C. (Optionally, the mixture might be left stand at room temperature for up to 24 hours.) Then a partial solvent switch to tetrahydrofuran is carried out: Solvent is distilled off three times at a jacket temperature of 70C down to a residual volume of 390L followed by addition of tetrahydrofuran (1st: 233 kg, 2nd. 233 kg, 3rd. 117 kg). For crystallization, firstly, methanol (83 kg) is added.Optionally, the mixture might be left stand at room temperature for up to 24 hours. Secondly, water (112 L) is added at an internal temperature of 60 to 70C, followed by addition of conc. hydrochloric acid (156,2 kg). The addition funnel is flushed with water (20 L). The resulting suspension is cooled to 20 to 30C within at least 70mm (optionally, the mixture might be left stand at room temperature for up to 72 hours) and then to an internal temperature of minus 5 to 5 C within at least 30mm. The suspension is then centrifuged and the solid is washed with water (368 L) followed by methanol (112 kg) and dried at a jacket temperature of 50C until <= 1% of residual solvent is reached. The enol product of formula (IV) is obtained as solid in 84,6% yield.
The synthetic route of 919103-45-0 has been constantly updated, and we look forward to future research findings.
Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; MAIER, Gerd-Michael; BAUM, Anke; BETZEMEIER, Bodo; HENRY, Manuel; HERTER, Rolf; REISER, Ulrich; SINI, Patrizia; WEBER, Dirk; WERTHMANN, Ulrike; ZAHN, Stephan Karl; WO2014/9318; (2014); A1;,
Indoline – Wikipedia,
Indoline | C8H9N – PubChem